Thermodynamic Analysis of Fe3O4Nanofluid Flowing Through A Circular Tube
Praveena Devi N1, Ch. Srinivasa Rao2, K Kiran Kumar3

1Praveena Devi N, Assistant Professor at department of Mechanical engineering, S R Engineering College, Warangal, Telangana, India.
2Ch Srinivasa Rao, Professor at department of Mechanical Engineering, Andhra University, Visakhapatnam, Andhra Pradesh, India.
3K Kiran Kumar, Associate Professor at department of Mechanical engineering, NIT Warangal, Warangal, Telangana, India.
Manuscript received on July 20, 2019. | Revised Manuscript received on August 10, 2019. | Manuscript published on August 30, 2019. | PP: 530-533 | Volume-8 Issue-6, August 2019. | Retrieval Number: E7306068519/2019©BEIESP | DOI: 10.35940/ijeat.E7306.088619
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Present work is an experimental study of entropy generation of Fe3O4-water nanofluid flowing through a circular tube. Flow is maintained in the turbulent region and tube is exposed to constant heat flux along the length. Experiments are conducted to study the entropy generation rate for different conditions such as particle volume concentrations varying from 1% to 6% and also for the different Reynolds numbers varying from 6000 to 22000. Measured data from experimentation is taken as input to calculate thermal entropy and frictional entropy generation separately. Based on these thermal entropy and frictional entropy generation total entropy generation and Bejan number are calculated and results are analyzed. Experimentally, it is proved that the changes in the thermal and frictional entropy generations are converse, such a way that, as particle concentration increases entropy generation due to heat transfer decreases whereas entropy generation due to friction increases. Finally experimental results reveal that there exits an optimum particle volume concentration where the total entropy generation is minimal. The same result has also appended by calculating the Bejan number.
Keywords: Bejan number, entropy generation due to heat transfer, entropy generation due to friction, Heat transfer, Nanofluid.