Abstract
Design and manufacturing issues are here studied about the production of hollow structures made of an outer high resistance skin and a metal foam filler. These structures can be very useful as reinforcements against lateral impacts of vehicles. In car bodies, at the waistline or door height, the available space is very limited. Compact bars with light weight, high energy absorption efficiency and limited maximum deflection (i.e. high maximum load) are required. The skin of the proposed structure provides strength and stiffness and can be assembled to the vehicle body. The foam core provides energy absorption properties. The combination of non conventional technologies (hydroforming and metal foams) allows for the production of lightweight, high performance components, particularly suited for flexural resistance in terms of amount of energy absorbed for a given maximum load. A performance indicator y is proposed with the aim of comparing the performance of side impact absorbers with different cross sections and made of different materials. The tube hydroforming process is investigated as a suitable way for performance improvement of metal foam filled structures in side impacts, particularly for non-constant section bars.
References
Bloch B.: On the safe side. Crash test technology international 4–8, June 2009.
Alwan J.M., Wu C.-C., Sheng T.H. et al.: Light Weight Steel Technology Used in A Vehicle Design: Safety CAE Analysis. American Soc. of Mech. Eng., AMD 250:57–71, 2001
Mildenberger U.: Planning for an environment-friendly car. Technovation 20(4):205, 2000
Ashby M.F., Evans A.G., et al.: Metal Foams: A Design Guide. Butterworth Heinemann 2000.
Johnson, W. Mamalis, A.G., Crashworthiness of Vehicles, Mechanics Engineering Publications, London, 1978.
Zarei H.R., Krogger M.: Bending behavior of empty and foam-filled beams: Structural optimization. Int. J. of Impact Engineering 35:521–529, 2008.
Santosa S., Banhart J., Wierzbicki T.: Experimental and numerical analyses of bending of foam-filled sections. Acta Mechanica 148:199–213, 2001.
Carrino L., Durante M., Franchitti S., Strano M.: On the Optimization of the Properties of Foam Filled Tubular Structure Using FEM. 2nd Int. Symposium on Cellular Metals for Structural and Functional Applications, CELLMET, Dresden 2008.
Schäffler P., Aluminium Foam Potentials for the Automotive and other Industries, Metfoam 2009, Bratislava 2009.
Gagliardi F., De Napoli L., Filice L. et al.: A comparison among FE models to simulate metallic foams forming. Materials and Design 30: 1282–1287, 2009.
Hanssen A.G. et al.: Validation of constitutive models applicable to aluminium foams. Int. J. of Mechanical Sciences 44:359–406, (2002).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Strano, M., Mussi, V. & Monno, M. Non-conventional technologies for the manufacturing of anti-intrusion bars. Int J Mater Form 3 (Suppl 1), 1111–1114 (2010). https://doi.org/10.1007/s12289-010-0966-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12289-010-0966-y