Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Formation of Ferrite with Cr Equivalents and Solidification Rates in Mod. (9-12)Cr-1Mo Steels
p.1497
Formation of a Crystalline-Glass Composite in a Cu-Based Bulk Metallic Glass by Using the Cu-Pb Monotectic System
p.1501
MC Carbide Decomposition during Thermal Exposure of Polycrystalline Ni-Base Superalloys
p.1505
Properties of Preferred Orientation of TiO2 Thin Film on Plasma Pretreated Substrate
p.1509
Effect of Heat Treatment on Characterizations of TiCrN Coated Layer by R.F Magnetron Sputtering
p.1513
Microstructure and Mechanical Properties of Mg-Zn-Y Alloys Fabricated by Rapid Solidification and Spark Plasma Sintering Processes
p.1517
Microstructure and Compression Properties of Al-8Fe-2Mo-2V-1Zr Alloys Produced by Extrusion of Melt-Spun Powders
p.1521
Aqueous Dispersion of ZrB2 Powder - Effect of Surface Corrosion and Dispersant
p.1525
Growth Model of Circumferential Outer Diameter Stress Corrosion Crack in Retired Steam Generator Tube of Kori 1 Nuclear Power Plant
p.1529

Effect of Heat Treatment on Characterizations of TiCrN Coated Layer by R.F Magnetron Sputtering

Article Preview

Abstract:

Series of TiCrN wear resistant coatings have been known to be superior to other coatings in protecting tools which may be damaged corrosion, oxidization, abrasion and hardness of mold materials. The corrosion and oxidation resistance of TiN/CrN(TiCrN) multilayer coatings is better than that of single TiN and CrN coatings. TiCrN coated layer was formed by coating a layer of TixCr1-xN by non-stoichiometry. In this study, TiCrN coated layer by R.F magnetron sputtering was executed heat treatment each other temperature by tube furnace. And then surfaces of coated layer and cross sections were observed by FE-SEM and XRD. Corrosion resistance tester measured characterizations of coated layers. When the temperature increased, TiN was partially transformed to Ti2N and TiNX, and CrN was also transformed to Cr2N. The formation of non-stoichiometric phases decreased corrosion resistance.

You might also be interested in these eBooks
Advances in Nanomaterials and Processing View Preview

Info:

Periodical:

Solid State Phenomena (Volumes 124-126)

Pages:

1513-1516

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.124-126.1513

Citation:

Cite this paper

Online since:

June 2007

Authors:

Dong Hwan Song, Gon Seung Yang, Jong Kook Lee

Keywords:

RF Magnetron Sputtering, Thin Film, TiCrN, TiN/CrN

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] B. Navinšek, P. Panjan: Thin Solid Films Vol. 223 (1993), p.4.

Google Scholar

[2] I. Milosev, H. -H. Strehblow, B. Navinšek: Surface and Coatings Technology Vol. 74/75 (1995), p.897.

Google Scholar

[3] P. Panjan, B. Navinšek, A. Zalar, I. Milosev: Thin Solid Films Vol. 281/282 (1996), p.298.

Google Scholar

[4] I. Milosev, H. -H. Strehblow, B. Navinšek: Thin Solid Films Vol. 303 (1997), p.246.

Google Scholar

[5] H. Ichimura, A. Kawana: J. Mater. Res. Vol. 9 (1994), p.151.

Google Scholar

[6] H. Benien, J. Maushart, M. Meyer, R. Suchentrunk: Mater. Sci. Eng. A Vol. 139 (1991), p.126.

Google Scholar

[7] A. A. VoeVodin, C. Rebholz, J. M. Schneider, P. Stevenson, A. Matthews: Surface and Coatings Technology Vol. 73 (1995), pp.185-197.

DOI: 10.1016/0257-8972(94)02381-6

Google Scholar

[8] Y. Otani, S. Hofmann, Thin Solid Films: Vol. 287 (1996), p.188.

Google Scholar

[9] J. -E. Sundgren and H.T.G. Hentzell: J. Vac. Sci. Technol., A Vol. 4 (5) (1986), pp.2259-2279.

Google Scholar

[10] V. K William Grips, V. Ezhil Selvi, Harish C. Barshilia, K.S. Rajam: Electrochimica Acta Vol. 51 (2006), pp.3461-3468.

DOI: 10.1016/j.electacta.2005.09.042

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved