Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Recommendations for a New Generation of Standards for Testing Numerical Assessment of Blast-Loaded Glass Windows
p.121
Fatigue Damage Prediction as a Part of Technical Systems Reliability Assessment
p.131
Practical Aspect of Methods Used for Blast Protection
p.139
Investigation of Disturbed Rock Zones in Open-Pit Mine Walls by Seismic Tomography
p.147
Techniques of Non-Destructive Testing of Steel Fiber Reinforced Concrete
p.153
MM-ALE Modelling Technique for Blast Response Analysis of Light Armoured Vehicles (LAV) According to AEP-55 Standard: Pros and Cons
p.159
Pushover Analysis Based on Equivalent Diagonal Springs for the Assessment of the Seismic Safety of Post-and-Beam Timber Buildings Braced with Nailed Shear Walls
p.170
Shock Propagation Effects in Multilayer Assembly Including a Liquid Phase
p.181
Smart Systems for the Protection of Individuals
p.190

Techniques of Non-Destructive Testing of Steel Fiber Reinforced Concrete

Article Preview

Abstract:

Non-destructive testing (NDT) is seeing increasingly frequent use in civil engineering thanks to the fact that the tests are repeatable and do not cause serious damage to the material. The requirements for the development and modernization of available testing devices and methodologies are ever increasing and the testing of existing structures often requires the use of NDT. Unfortunately, every measurement and methodology has its limits and the measurement devices for the evaluation of steel fiber reinforced concrete (SFRC) are no exception. In recent decades there has been an effort to modernize and develop existing measurement devices for SFRC testing. This building material is commonly used especially in large-scale structures. Nevertheless, the technology of SFRC could seem complicated when compared with ordinary concrete and the very nature of this composite material could lead to SFRC inhomogeneity during construction. This paper describes the assessment of SFRC by more or less available methodologies and measurements utilizing non-destructive principles.

You might also be interested in these eBooks
Structural and Mechanical Engineering for Security and Prevention View Preview

Info:

Periodical:

Key Engineering Materials (Volume 755)

Pages:

153-158

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.755.153

Citation:

Cite this paper

Online since:

September 2017

Authors:

Eva Zezulová*, Tereza Komárková

Keywords:

Computed Tomography, Electromagnetic Field, Magnetic Probe, Non-Destructive Testing of Construction Materials, Steel Fiber Reinforced Concrete

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] B. Hobbs, M. T. Kebir, Non-destructive testing techniques for the forensic engineering investigation of reinforced concrete buildings, 167 (2007) 167 – 172. http: /dx. doi. org/10. 1016/j. forsciint. 2006. 06. 065.

DOI: 10.1016/j.forsciint.2006.06.065

Google Scholar

[2] Kopec, B. a kol., Nedestruktivní zkoušení materiálů a konstrukcí, CERM, Brno, 2008, ISBN978-80-7204-591-4.

Google Scholar

[3] Li Z., Advanced Concrete Technology, (2011), 506 p, doi: 10. 1002/9780470950067.

Google Scholar

[4] Veselý, J. Vodička, J. Vašková, J. Krátký, Tests of struktural fibre concrete. In: Beton: Technologie, konstrukce, sanace. Praha: Česká betonářská společnost. (1999) 43 – 47. ISSN 1213-3116.

Google Scholar

[5] G. Abdul, A. S. Chavhan, R. S. Tatwawadi. Steel Fibre reinforced concrete, International Journal of Engineering Trends and Technology (IJETT), 9 (2014) 791 - 797.

DOI: 10.14445/22315381/ijett-v9p349

Google Scholar

[6] Lataste J. F., Behloul M., Breysse D., Characterisation of fibres distribution in a steel fibre reinforced concrete with electrical resistivity measurements, NDT & E International, 41 (2008) 8, 638-647, doi: 10. 1016/j. ndteint. 2008. 03. 008.

DOI: 10.1016/j.ndteint.2008.03.008

Google Scholar

[7] Stähli P., G. M. van Mier J., Manufacturing, fibre anisotropy and fracture of hybrid fibre concrete, Engineering Fracture Mechanics, 74 (2007) 223-242, doi: 10. 1016/j. engfracmech. 2006. 01. 028.

DOI: 10.1016/j.engfracmech.2006.01.028

Google Scholar

[8] ČSN EN 12350 Testing of fresh concrete.

Google Scholar

[9] ČSN EN 12390 Testing of hardened concrete.

Google Scholar

[10] Information on http: /www. krampeharex. cz.

Google Scholar

[11] Vítek J. L., Smiřinský S., Veselý P., Veselý V., Variation of steel-fibre concrete parameters depending on the mixing procedure, Fibre Concerete 2013, 7 (2013).

Google Scholar

[12] Information on: http: /wille-geotechnik. de/118. 0. html?&L=0.

Google Scholar

[13] Information on: http: /stavba. tzb-info. cz/beton-malty-omitky/9664-nova-srovnavaci-mereni-pri-kontrole-homogenity-dratkobetonu.

Google Scholar

[14] Hobst, L., Bílek P., Nondestructive identification of material properties of fibre concrete: A stationary magnetic field, AIP Conference Proceedings. Eds. Theodore Simos and Charalambos Tsitouras, 1738 (2016).

DOI: 10.1063/1.4952171

Google Scholar

[15] Komárková T.; Králíková M.; Kocáb D.; Stavař T.; Kovács P., Validation of methods for determining permeability of cement composite structure by means of computed tomography. Book of abstracts, 22nd international conference on materials, and technology, 2014, Portorož, Slovenia, ISBN: 978-961-92518-7- 4.

DOI: 10.4028/www.scientific.net/amr.1122.141

Google Scholar

[16] Hobst L.; Bílek P.; Anton O.; Zikmund T., Tomografické zjištění anomálního rozdělení drátků v kalibračních vzorcích drátkobetonu. In 20. BETONÁŘSKÉ DNY 2013. Sborník ke konferenci. Hradec Králové, ČR: ČBS Servis, s. r. o., 2013. s. 464-468. ISBN: 978-80-87158-34- 0.

Google Scholar

[17] Komárková T. Design of Methodology for Non-Destructive-Testing of Steel-Reinforced-Fiber- Concrete. In Proceedings of the 17th Conference on the Rehabilitation and Reconstruction of Buildings, Switzerland: Trans Tech Publications Ltd, (2016).

DOI: 10.4028/www.scientific.net/kem.714.179

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved