Abstract
Pressure variation during the coextrusion of two low density polyethylene melts was investigated. Melt streams were delivered to a die from two separate extruders to converge in a 30°° geometry to form a two layer extrudate. Melt flow in the confluent region and die land to the die exit was observed through side windows of a visualisation cell. Stream velocity ratio was varied by control of extruder screw speeds. Layer thickness ratios producing wave type interfacial instability were quantified for each melt coextruded on itself and for the combined melts. Stream pressures and screw speeds were monitored and analysed. Wave type interfacial instability was present during the processing of the melts at specific, repeatable, stream layer ratios. Increased melt elasticity appeared to promote this type of instability. Analysis of process data indicates little correlation between perturbations in extruder screw speeds and stream pressures. The analysis did however show covariance between the individual stream pressure perturbations. Interestingly there was significant correlation even when interfacial instability was not present. We conclude that naturally occurring variation in extruder screw speeds do not perturb stream pressures and, more importantly, natural perturbations in stream pressures do not promote interfacial instability.
References
Chen, K. P., “Interfacial Instability due to Elastic Stratification in Concentric Coextrusion of Two Viscoelastic Fluids”, J. Non-Newtonian Fluid Mech., 40, 155–176 (1991) 10.1016/0377-0257(91)85011-7Search in Google Scholar
Doi, M., Edwards, S. E.,: The Theory of Polymer Dynamics, Oxford Science, New York (1986)Search in Google Scholar
Dooley, J., Hughes, K. “Analyzing the Flow through Dies Containing Different Channel Geometries”, SPE ANTEC Tech. Papers, 54, 236–240 (1996)Search in Google Scholar
Dooley, J., Kun, S. H. and Hughes, K., “An Experimental Study on the Effect of Polymer Viscoelasticity on Layer Rearrangement in Coextruded Structures”, Polym. Eng. Sci., 38, 1060–1071 (1998) 10.1002/pen.10274Search in Google Scholar
Dooley, J., Ramanathan, R., “Coextrusion Layer Thickness Variation – Effects of Geometry on Layer Rearrangement”, SPE ANTEC Tech. Papers, 52, 89–93 (1994)Search in Google Scholar
Fyrillas, M., Georgiou, G., Vlassopoulos, D. and Hatzikiriakos, S., “A Mechanism for Extrusion Instabilities in Polymer Melts”, Polym. Eng. Sci., 39, 2498–2504 (1999) 10.1002/pen.11637Search in Google Scholar
Han, C. D., Shetty, R., “Studies on Multilayer Film Coextrusion I. The Rheology of Flat Film Coextrusion”, Polym. Eng. Sci., 16, 697–705 (1976) 10.1002/pen.760161008Search in Google Scholar
Han, C. D., Shetty, R., “Studies on Multilayer Film Coextrusion III. The Rheology of Blown Film Coextrusion”, Polym. Eng. Sci., 18, 187–199 (1978) 10.1002/pen.760180304Search in Google Scholar
Han, C. D., Chin, H. B., “Theoretical Prediction of the Pressure Gradients in Coextrusion of Non-Newtonian Fluids”, Polym. Eng. Sci., 19, 1156–1162 (1979) 10.1002/pen.760191605Search in Google Scholar
Herambh, K., Khomami, B., “An Investigation of Instanility in the Superposed Channel Flow of Viscoelastic Fluids”, J. Non-Newtonian Fluid Mech., 81, 27–69 (1999) 10.1016/S0377-0257(98)00088-3Search in Google Scholar
Hinch, E. J., Harris, O. J. and Rallison, J. M., “The Instability Mechanism for Two Elastic Liquids Being Co-extruded”, J. Non-Newtonian Fluid Mech., 43, 311–324 (1992) 10.1016/0377-0257(92)80030-2Search in Google Scholar
Khomami, B., Wilson, G. M., “An Experimental Investigation of Interfacial Instability in Superposed Flow of Viscoelastic Fluids in A Converging/Diverging Channel Geometry”, J. Non-Newtonian Fluid Mech., 58, 47–5 (1995) 10.1016/0377-0257(94)01352-ISearch in Google Scholar
Khomami, B., Su, K. C., “An Experimental/Theoretical Investigation of Interfacial Instabilities in Superposed Pressure-driven Channel Flow of Newtonian and Well-characterized Viscoelastic Fluids Part I. Linear Stability and Encapsulation Effects”, J. Non-Newtonian Fluid Mech., 91, 59–84 (2000) 10.1016/S0377-0257(99)00086-5Search in Google Scholar
Khomami, B., Renardy, Y., Su, K. C. and Clarke, M. A., “An Experimental/Theoretical Investigation of Interfacial Instabilities in Superposed Pressure-driven Channel Flow of Newtonian and Well-characterized Viscoelastic Fluids Part II. Nonlinear Stability”, J. Non-Newtonian Fluid Mech., 91, 85–104 (2000) 10.1016/S0377-0257(99)00086-5Search in Google Scholar
Kopytko, W., “Interfacial Flow Stabilities in Multilayer Coextrusion”, Ph.D Thesis, Tomas Bata University, Zlin, Czech Republic (2003)Search in Google Scholar
Kopytko, W., Zatloukal, M. and Vlček, J., “Measurement of Interfacial Instability during the Coextrusion of LDPE's in Flat Dies”, TAPPI 9th European PLACE Conf. Rome (2003)Search in Google Scholar
Hrymak, A. N., Vlachopoulos, J., “Simulation of Coextrusion Flows of Polymer Melts”, Seikei-Kakou, 10, 695–705 (1998)Search in Google Scholar
Malkin, Y. A., Friedman, M. L., Vachagin, K. D. and Vinogradov, G. V., “Bicomponent Flow of Molten Polymers in Annular Dies of Extruders”, J. Appl. Polym. Sci., 19, 375–390 (1975) 10.1002/app.1975.070190206Search in Google Scholar
Martyn, M. T., Spares, R., Coates, P. D. and Zatloukal, M., “Visualisation and Analysis of Interfacial Instability in the Coextrusion of LDPE Melts”, Plast. Rubber Compos., 33, 27–35, (2004) 10.1179/146580104225018328Search in Google Scholar
Martyn, M. T., Spares, R., Coates, P. D. and Zatloukal, M., “Imaging and Analysis of Wave Type Interfacial Instability in the Coextrusion of Low Density Polyethylene Melts”, J. Non-Newtonian Fluid Mech., 156, 150–164 (2009) 10.1016/j.jnnfm.2008.08.001Search in Google Scholar
Mavridis, H., Hrymak, A. N. and VlachopoulosJ., “Finite-Element Simulation of Stratified Multiphase Flows”, AICHE J., 33, 410–422 (1987) 10.1002/aic.690330307Search in Google Scholar
Mckinley, G. H., Byars, J. A., Brown, R. A. and Armstrong, R. C., “Observations on the Elastic Instability in Cone-and-Plate and Parallel Plate Flows of a Polyisobutylene Boger Fluid”, J. Non-Newtonian Fluid Mech., 40, 201–229 (1991a) 10.1016/0377-0257(91)85013-9Search in Google Scholar
Mckinley, G. H., Raiford, W. P., Brown, R. A. and Armstrong, R. C., “Nonlinear Dynamics of Viscoelastic Flow in Axisymmetric Abrupt Contractions”, J. Non-Newtonian Fluid Mech., 22, 411–456 (1991b) 10.1017/S0022112091001489Search in Google Scholar
Mckinley, G. H., Armstrong, R. C. and Brown, R. A., “The Wake Instability in Viscoelastic Flow Past Confined Circular Cylinders”, Philos. Trans. R. Soc. London Ser. A, 344, 265–304 (1993) 10.1098/rsta.1993.0091Search in Google Scholar
Mckinley, G. H., Pakdel, P. and Öztekin, A., “Rheological and Geometric Scaling of Purely Elastic Flow Instabilities”, J. Non-Newtonian Fluid Mech., 67, 19–48 (1996) 10.1016/S0377-0257(96)01453-XSearch in Google Scholar
Mitsoulis, E., Heng, F., “Numerical Simulation of Coextrusion from A Circular Die”, J. Appl. Polym. Sci., 34, 1713–1725 (1987) 10.1002/app.1987.070340429Search in Google Scholar
Yu, T. C., Han, C. D., “Stratified Two-phase Flow of Molten Polymers”, J. Appl. Polym. Sci., 17, 1203–1225 (1973) 10.1002/app.1973.070170417Search in Google Scholar
Pakdel, P., Mckinley, G. H., “Elastic Instability and Curved Streamlines”, Phys. Rev. Lett., 77, 2459 (1996) 10.1103/PhysRevLett.77.2459Search in Google Scholar
Perdikoulias, J., Tzoganakis, C., “Interfacial Instability Phenomena in Blown Film Coextrusion of Polyethylene Resins”, SPE ANTEC Tech. Papers, 53, 176–185 (1995)Search in Google Scholar
Perdikoulias, J., “Analysis and Design of Annular Dies for Mono- and Multilayer Polymer Flows”, Phd Thesis, University of Waterloo, Waterloo, Ontario (1997)Search in Google Scholar
Puissant, S., Vergnes, B., Demay, Y. and AgassantJ.F., “A General Non-isothermal Model for One-dimensional Multilayer Coextrusion Flows”, Polym. Eng. Sci., 32, 213–220 (1992) 10.1002/pen.760320308Search in Google Scholar
Ramanathan, R., Shanker, R., Rehg, T., Jons, S., Headley, S. and Shrenk, D. L., “Wave Pattern Instability in Multilayer Coextrusion – An Experimental Investigation”, SPE ANTEC Tech. Papers, 42, 224–228 (1996)Search in Google Scholar
Ramanathan, R., Schrenk, W. J., “Flow Visualization: A Contemporary Experimental Tool to Decipher Stability of Multilayer Coextrusion Flows”, Eng. Plast., 6, 73–86 (1993)Search in Google Scholar
Rodgers, J. L., Nicewander, W. A., “Thirteen Ways to Look at the Correlation Coefficient”, The American Statistician, 42, 59–66 (1988) 10.1080/00031305.1988.10475524Search in Google Scholar
Schrenk, W. J., Bradley, N. L., Alfrey, T. and Maack, H., “Interfacial Flow Instability in Multilayer Coextrusion”, Polym. Eng. Sci., 18, 620 (1978) 10.1002/pen.760180803Search in Google Scholar
Su, Y. Y., Khomami, B., “Interfacial Stability of Multilayer Viscoelastic Fluids in Slit and Converging Channel Die Geometries.” J. Rheol.36, 357–387 (1992) 10.1122/1.550349Search in Google Scholar
Su, Y. Y., Khomami, B., “Purely Elastic Interfacial Instabilities in Superposed Flow of Polymeric Fluids”, Rheol. Acta.31, 413 (1992) 10.1007/BF00701121Search in Google Scholar
Valette, R., Laure, P., Demay, Y., Agassant, J. F. and Vergnes, B., “Experimental and Theoretical Study of the Interface Instability of a Two-layer Coextrusion Flow”, 17th Annual Meeting of the Polymer Processing Society, Montreal, Canada (2001)Search in Google Scholar
Wilson, G. M., Khomami, B., “An Experimental Investigation of Interfacial Instabilities in Multilayer Flow of Viscoelastic Fluids”, J. Non-Newtonian Fluid Mech., 45, 355–384 (1992) 10.1016/0377-0257(92)80068-9Search in Google Scholar
Wilson, H. J., RallisonJ.M., “Short Wave Instability of Co-extruded Elastic Liquids with Matched Viscosities”, J. Non-Newtonian Fluid. Mech., 72, 237–251 (1997) 10.1016/S0377-0257(97)00025-6Search in Google Scholar
Yih, C. S., “Instability due to Viscosity Stratification”, J. Fluid. Mech., 27, 337–352 (1967) 10.1017/S0022112067000357Search in Google Scholar
Zatloukal, M., Vlček, J., Tzoganakis, C. and Sáha, P., “The Effect of Layer Stretching on the Onset of ‘Wave’ Interfacial Instability”, SPE ANTEC Tech. Papers, 44–48 (2001a)Search in Google Scholar
Zatloukal, M., Vlček, J., Tzoganakis, C. and Sáha, P., “Numerical Simulation of Polymer Coextrusion Flows: A Criterion for Detection of ‘Wave’ Interfacial Instability Onset”, Int. Polym. Proc., 16, 198–207 (2001b)10.3139/217.1642Search in Google Scholar
Zatloukal, M., Vlček, J., Tzoganakis, C. and Sáha, P., “Viscoelastic Stress Calculation in Multilayer Coextrusion Dies: Die Design and Extensional Viscosity Effects on the Onset of Wave Interfacial Instability.” Polym. Eng. Sci., 42, 1520–1533 (2002) 10.1002/pen.11048Search in Google Scholar
Zatloukal, M., Kopytko, W., Lengálová, A. and Vlček, J., “Theoretical and Experimental Analysis of Interfacial Instabilities in Coextrusion Flows.” J. Appl. Polym. Sci., 98, 153–162 (2005) 10.1002/app.22030Search in Google Scholar
© 2013, Carl Hanser Verlag, Munich