Abstract
Polypropylene block-copolymer (PP-B) pipes were prepared using a self-designed rotational extrusion processing system. The experimental results showed that though the crystal morphology in the prepared PP-B pipes did not change compared to conventional extrusion, the molecular chains in amorphous region apparently deviated from the axial direction. As a result, in comparison with the conventional extrusion pipes, the mechanical properties in hoop direction and the resistance to crack growth of rotation extrusion PP-B pipes were greatly improved. Furthermore, both the two mechanical properties improved monotonously with increasing mandrel rotation speed and inner wall cooling rate.
References
Allan, P. S., Bevis, M. J., “Shear Controlled Orientation in Extrusion”, Plast. Rubber. Compos. Process. Appl., 16, 133–137 (1991)Search in Google Scholar
Chen, K. Y., Zhou, N. Q., Liu, B. and Jin, G., “Improved Mechanical Properties and Structure of Polypropylene Pipe Prepared under Vibration Force Field”, J. Appl. Polym. Sci., 114, 3612–3620 (2009) 10.1002/app.30997Search in Google Scholar
Farah, M., Bretas, R. E. S., “Characterization of i-PP shear-induced Crystallization Layers Developed in a Slit Die”, J. Appl. Polym. Sci., 91, 3528–3541 (2004) 10.1002/app.13576Search in Google Scholar
Fujiyama, M., Kitajima, Y. and Inata, H., “Structure and Properties of Injection Molded Polypropylenes with Different Molecular Weight Distribution and Tacticity Characteristics”, J. Appl. Polym. Sci., 84, 2142–2156 (2002) 10.1002/app.10372Search in Google Scholar
Garcia, R. A., Carrero, A., Aroca, M., Prieto, O. and Dominguez, C., “Slow Crack Growth resistence in Resin Blends of Chromium and Metallocene Catalyzed Ethylene-Hexene Copolymers for Pipe Applications”, Polym. Eng. Sci., 48, 925–933 (2008) 10.1002/pen.21038Search in Google Scholar
Garcia, R. A., Carrero, A., Aroca, M., Prieto, O. and Dominguiez, C., “Slow Crack Growth Resistance in Resin Blends of Chromium and Metallocene Catalyzed Ethylene-hexene Copolymers for Pipe Applications”, Polym. Eng. Sci., 48, 925–933 (2008) 10.1002/pen.21038Search in Google Scholar
Hametner, Ch., “Polypropylene Pipes for Drinking Water Supply”, JMS-Ñpure. Appl. Chem., 36, 1751–1758 (1999) 10.1081/MA-100101625Search in Google Scholar
Huo, H., Jiang, S. C. and An, L. J., “Influence of Shear on Crystallization Behavior of the β Phase in Isotactic Polypropylene with β-Nucleating Agent”, Macromolecules, 37, 2478–2483 (2004) 10.1021/ma0358531Search in Google Scholar
Kalay, G., Bevis, M.J., “The Effect of Shear Controlled Orientation in Injection Moulding on the Mechanical Properties of an Aliphatic Polyketone”, J. Polym. Sci. Part. B: Polym. Phys., 35, 415–430 (1997) 10.1002/(SICI)1099-0488(199702)35:3<415::AID-POLB2>3.0.CO;2-RSearch in Google Scholar
Kalay, G., Sousa, R. A., Reis, R. L., Cunha, A. M. and Bevis, M. J., “The Enhancement of the Mechanical Properties of a High-density Polyethylene”, J. Appl. Polym. Sci., 73, 2473–2483 (1999). 10.1002/(SICI)1097-4628(19990919)73:12<2473::AID-APP16>3.0.CO;2-OSearch in Google Scholar
Kornfield, J. A., Kumaraswamy, G. and Issaian, A. M., “Recent Advances in Understanding Flow Effects on Polymer Crystallization”, Ind. Eng. Chem. Res., 4, 6383–6392 (2002) 10.1021/ie020237zSearch in Google Scholar
Lee, K. S., Lai, M. O. and Chen, C. M., “Flow-forming of Super-tough Polypropylene Pipes Using a Twin Motor-driven Rollers Setup”, J. Mater. Process. Technol., 65, 228–236 (1997) 10.1016/S0924-0136(96)02266-2Search in Google Scholar
Li, L. B., Jeu, W. H., “Shear-Induced Smectic Ordering in the Melt of Isotactic Polypropylene”, Phys. Rev. Lett., 92, 075506-1–075506-3 (2004) 10.1103/PhysRevLett.92.075506Search in Google Scholar PubMed
Lotz, B., Fillon, B., Thierry, A. and Wittmann, J.C., “Low Tc Growth Transition in Isotactic Polypropylene: Β to Α and A to Semtctic Phases”, Polym. Bull., 25, 101–105 (1991)Search in Google Scholar
Lu, X. C., Zhou, Z. Q. and Brown, N., “The Anisotropy of Slow Crack Growth in Polyethylene Pipes”, Polym. Eng. Sci., 34, 109–115 (1994) 10.1002/pen.760340206Search in Google Scholar
Luo, F., Wang, J.W., Bai, H.W., Wang, K., Deng, H., Zhang, Q., Chen, F., Fu, Q. and Na, B., “Synergistic Toughening of Polypropylene Random Copolymer at Low Temperature: Β-Modification and Annealing”, Mater. Sci. Eng. A, 528, 7052–7059 (2011) 10.1016/j.msea.2011.05.030Search in Google Scholar
Min, N., Bai, S. B. and Wang, Q., “Effect of the Inner Wall Cooling Rate on the Structure and Properties of a Polyethylene Pipe Extruded at a High Rotation Speed”, J. Appl. Polym. Sci., 119, 1659–1666 (2011) 10.1002/app.32840Search in Google Scholar
Morath, C.C., Ward, I.M., “Biaxially Oriented Polypropylene Pipes: Implications for Impact and Hydrostatic Pressure Resistance”, Plast. Rubber. Compos., 35, 447–454 (2006) 10.1179/174328906X149718Search in Google Scholar
Pantani, R., Coccorullo, I., Volpe, V. and Titomanlio, G., “Shear-Induced Nucleation and Growth in Isotactic Polypropylene”, Macromolecules, 43, 9030–9038 (2010) 10.1021/ma101775hSearch in Google Scholar
Park, J., Eom, K., Kwon, O., Woo, S., “Chemical Etching Technique for the Investigation of Melt-crystallized Isotactic Polypropylene Spherulite and Lamellar Morphology by Scanning Electronmicroscopy”, Microsc. Microanal., 7, 276–286 (2001) PMid:12597818 10.1017/S1431927601010285Search in Google Scholar
Pornnimit, B., Ehrenstein, G. W., “Extrusion of Self-reinforced Polyethylene”, Adv. Polym. Technol., 11, 91–98 (1991) 10.1002/adv.1991.060110202Search in Google Scholar
Remias, J., “Polypropylene Block Copolymers for Use in Sewage and Drainage Applications”, International. Polyolefin. Conference., 1, 519–551 (2009)Search in Google Scholar
Shen, K. Z., Chin. Pat 200620033682.7 (2006)Search in Google Scholar
Somani, R.H., Hsiao, B.S. and Nogales, A., “Structure Development during Shear Flow Induced Crystallization of i-PP: In Situ Wide-Angle X-ray Diffraction Study”, Macromolecules, 34, 5902–590934 (2001) 10.1021/ma0106191Search in Google Scholar
Teoh, S. H., Lee, K. S. and Raja, T. R., “Tensile Properties of Flow-formed Polypropylene Pipe”, J. Mater. Sci., 26, 2111–2118 (1991) 10.1007/BF00549176Search in Google Scholar
Trznadel, M., Kryszewski, M., “Thermal Shrinkage of Oriented Polymers”, Polym. Rev., 32, 259–300 (1992)Search in Google Scholar
Turner-Jones, A., Aizlewood, J. M. and Beckett, D. R., “Crystalline Forms of Isotactic Polypropylene”, Macromol. Chem., 75, 134–158 (1964) 10.1002/macp.1964.020750113Search in Google Scholar
Wang, Q., Zhang, J., Guo, Y., Bai, S. B. and Hua, Z. K., Chin. Pat CN 101337425 (2009)Search in Google Scholar
Wang, T. L., Tang, S. C. and Chen, J. D., “Effects of Processing Route on Morphology and Mechanical Behavior of Polypropylene in Equal Channel Angular Extrusion”, J. Appl. Polym. Sci., 122, 2146–2158 (2011) 10.1002/app.34335Search in Google Scholar
WhiteJ.R., “Origins and Measurements of Internal Stress in Plastics”, Polym. Test., 4, 165–191 (1984) 10.1016/0142-9418(84)90010-2Search in Google Scholar
Worth, R. A., “Modification to Weld Lines in Extruded Thermoplastic Pipe Using a Rotating die System”, Polym. Eng. Sci., 20, 551–554 (1980) 10.1002/pen.760200807Search in Google Scholar
Worth, R. A., “The Effect of Mandrel Rotation on Power Consumption in Polypropylene Extrusion”, Polym. Eng. Sci., 19, 198–202 (1979) 10.1002/pen.760190306Search in Google Scholar
Xia, Z. Y., Sue, H. J., “Morphological Evolution of PET during Equal Channel Angular Extrusion Process”, Macromolecules, 33, 8746–8755 (2000) 10.1021/ma001140wSearch in Google Scholar
Yuan, Y., Li, A. D., Shen, K. Z., “Study of the Strength of SGF/PE-HD/PP Pipes Extruded in Circular and Axial Stress Fields”, Chin. Plast., 18, 32–34 (2004)Search in Google Scholar
Zachariades, A. E., Chung, B., “New Polymer Processing Technologies for Engineering the Physical and Mechanical Properties of Polymer Products”, Adv. Polym. Tech., 7, 397–409 (1987) 10.1002/adv.1987.060070405Search in Google Scholar
Zhang, J. Y., “Experimental Study of Stress Cracking in High Density Polyethylene Pipes”, Ph.D Dissertation, Drexel University, Philadelphia (2006)Search in Google Scholar
© 2013, Carl Hanser Verlag, Munich