Abstract
Decompression experiments from a PMMA compound saturated with CO2 at high pressure were performed to investigate the heterogeneous effect due to the aggregate of the additives on the microcellular foam structure generated. The observed results were compared with calculation results from a previously proposed homogeneous nucleation model. Uniform distribution of foams was obtained at a lower temperature of 20°C at various initial pressures tested. However, the heterogeneous effect due to the aggregate of the additives in the compound occurred at the solution temperature of 40°C, which is quite different from the results obtained in PMMA/CO2 solution where homogeneous nucleation occurs in the temperature range between 40°C and 70°C. Experimental results obtained in this study may be applied to the injection-molding process of PMMA compounds.
References
Arefmanesh, A., Advani, S. G., “Diffusion-Induced Growth of a Gas Bubble in a Viscoelastic Fluid”, Rheol. Acta., 30, 274–283 (1991)10.1007/BF00366641Search in Google Scholar
Arefmanesh, A., et al., “An Accurate Numerical Solution for Mass Diffusion-induced Bubble Growth in Viscous Liquids Containing Limited Dissolved Gas”, Int. J. Heat Mass Transfer, 35, 1711–1722 (1992)10.1016/0017-9310(92)90141-ESearch in Google Scholar
Baldwin, D. F., et al., “An Extrusion System for the Processing of Microcellular Polymer Sheets: Shaping and Cell Growth Control”, Polym. Eng. Sci., 36, 1425–1435 (1996)10.1002/pen.10537Search in Google Scholar
Blander, M., Katz, K. L., “Bubble Nucleation in Liquids”, AIChE J., 21, 833–848 (1975)10.1002/aic.690210502Search in Google Scholar
Colton, J. S., Suh, N. P., “The Nucleation of Microcellular Thermoplastic Foam with Additives: Part I: Theoretical Considerations”, Polym. Eng. Sci., 27, 485–492 (1987a)10.1002/pen.760270702Search in Google Scholar
Colton, J. S., Suh, N. P., “The Nucleation of Microcellular Thermoplastic Foam with Additives: Part II: Experimental Results and Discussion”, Polym. Eng. Sci., 27, 493–499 (1987b)10.1002/pen.760270703Search in Google Scholar
Di Maio, E., et al., “Structure Optimization of Polycaprolactone by Using Mixtures of CO2 and N2 as Blowing Agents”, Polym. Eng. Sci., 45, p. 432–441 (2005)10.1002/pen.20289Search in Google Scholar
Feder, J., et al., “Homogeneous Nucleation and Growth of Droplets in Vapors”, Adv. Phys., 15, 111–178 (1966)10.1080/00018736600101264Search in Google Scholar
Frenkel, J.: Kinetic Theory of Liquids, Oxford University Press, London (1946)Search in Google Scholar
Goel, S. K., Beckman, F. J., “Modeling the Swelling of Crosslinked Elastomers by Supercritical Fluids”, Polymer, 33, 5032–5039 (1992)10.1016/0032-3861(92)90054-ZSearch in Google Scholar
Goel, S. K., Beckman, E. J., “Generation of Microcellular Polymeric Foams Using Supercritical Carbon Dioxide. I: Effect of Pressure and Temperature on Nucleation”, Polym. Eng. Sci., 34, 1137–1147 (1994)10.1002/pen.760341407Search in Google Scholar
Goel, S. K., Beckman, E. J., “Nucleation and Growth in Microcellular Materials: Supercritical CO2 as Foaming Agent”, AIChE J., 41, 357–367 (1995)10.1002/aic.690410217Search in Google Scholar
Guo, Q., et al., “A Microcellular Foaming Simulations System with a High Pressure-Drop Rate”, Ind. Eng. Chem. Res., 45, 6153–6161 (2006)10.1021/ie060105wSearch in Google Scholar
Han, J. H., Han, C. D., “Bubble Nucleation in Polymeric Liquids. II. Theoretical Considerations”, J. Polym. Sci., Part B28, 743–761 (1990)10.1002/polb.1990.090280510Search in Google Scholar
Han, J. H., Yoo, H. J., “Studies on Structural Foam Processing. IV. Bubble Growth During Mold Filling”, Polym. Eng. Sci., 21, 518–533 (1981)10.1002/pen.760210903Search in Google Scholar
Handa, Y. D., Zhang, Z., “A New Technique for Measuring Retrograde Vitrification in Polymer-Gas Systems and for Maling Ultramirocellular Foams from the Retrograde Phase”, J. Polym. Sci. B38, 716–725 (2000)10.1002/(SICI)1099-0488(20000301)38:5<716::AID-POLB9>3.0.CO;2-NSearch in Google Scholar
Hemmingsen, E. A., “Cavitation in Gas-supersaturated Solutions”, J. Appl. Phys., 46, 213–218 (1975)10.1063/1.321323Search in Google Scholar
Hemmingsen, E. A., “Spontaneous Formation of Bubbles in Gas-Supersaturated Water”, Nature, 267, 141–142 (1977)10.1038/267141a0Search in Google Scholar
Hile, D. D., et al., “Active Growth Factor Delivery from pPoly(D, L-Lactide-Co-Glycolide) Foams prepared in Supercritical CO2”, J. Controlled Release, 66, 177–185 (2000)10.1016/S0168-3659(99)00268-0Search in Google Scholar
Joshi, K., et al., “Prediction of Cellular Structure in Free Expansion of Viscoelastic Media”, J. Appl. Polym. Sci., 67, 1353–1368 (1998)10.1002/(SICI)1097-4628(19980222)67:8<1353::AID-APP2>3.0.CO;2-DSearch in Google Scholar
Kang, S. L., et al., “Bubble Nucleation in Polymer Solutions”, Polymer (Korea), 28, 51–58 (2004)Search in Google Scholar
Kim, K. Y., et al., “Bubble Nucleation and Growth in Polymer Solutions”, Polym. Eng. Sci., 44, 1890–1899 (2004)10.1002/pen.20191Search in Google Scholar
Kumar, V., Suh, N. P.: “A process for making microcellular thermoplastic parts”, Polym. Eng. Sci., 30, p. 1323 (1990)10.1002/pen.760302010Search in Google Scholar
Kwak, H., “Bubbles: Homogeneous Nucleation”, in: Encyclopedia of Surface and Colloid Science. Somasundaran, P. (Ed.), Taylor & Fransis, Boca Raton, 1048–1071 (2006)Search in Google Scholar
Kwak, H., KimY. W., “Homogeneous Nucleation and Macroscopic Growth of a Gas Bubble in Organic Solutions”, Int. J. Heat Mass Transfer, 41, 757–767 (1998)10.1016/S0017-9310(97)00182-8Search in Google Scholar
Kwak, H., LeeS., “Homogeneous Bubble Nucleation Predicted by a Molecular Interactions”, J. Heat Trans., 113, 714–721 (1991)10.1115/1.2910622Search in Google Scholar
Kwak, H., Oh, S., “A Model of Homogeneous Bubble Nucleation of CO Bubbles in Fe-C-O Melts”, J. Colloid Interface Sci., 198, 113–118 (1998)10.1006/jcis.1997.5244Search in Google Scholar
Kwak, H., Panton, R. L., “Gas Bubble Nucleation in Nonquilibrium in Water-Gas Solutions”, J. Chem. Phys., 78, 5795–5799 (1983)10.1063/1.445422Search in Google Scholar
Kwak, H., Panton, R. L., “Tensile Strength of Simple Liquids Predicted by a Model of Molecular Interactions”, J. Phys. D: Appl. Phys., 18, 647–659 (1985)10.1088/0022-3727/18/4/009Search in Google Scholar
Lee, J. G., Flumerfelt, R. W., “A Refined Approach to Bubble Nucleation and Polymer Forming Process: Dissolved Gas and Cluster Size Effects”, J. Colloid Interface Sci., 184, 335–348 (1996)10.1006/jcis.1996.0628Search in Google Scholar PubMed
Nabarro, F. R. N., “The Strains Produced by Precipitation in Alloys”, Proc. Roy. Soc. A175, p. 519 (1940)10.1098/rspa.1940.0072Search in Google Scholar
Porter, D. A., Easterling, K. E.: Phase Transformations in Metals and Alloys, Van Nostrand Reinhold Co.New York (1981)Search in Google Scholar
Ramesh, N. S., et al., “Numerical and Experimental Studies of Bubble Growth During the Microcellular Foaming Process”, Polym. Eng. Sci., 31, 1657–1664 (1991)10.1002/pen.760312305Search in Google Scholar
Rao, C. N. R., Rao, K. J.: Phase Transition in Solids, McGraw-Hill, New York (1978)Search in Google Scholar
Shafi, M. A., et al., “Prediction of Cellular Structure in Free Expansion Polymer Foam Processing”, Polym. Eng. Sci., 36, 1950–1959 (1996)10.1002/pen.10591Search in Google Scholar
Stewart, C. W., “Nucleation and Growth of Bubbles in Elastomers”, J. Polym. Sci.A-2, 8, 937–955 (1970)Search in Google Scholar
Tomasko, D. L., et al., “A Review of CO2 Applications in the Processing of Polymers”, Ind. Eng. Chem. Res., 42, 6431–6456 (2003)10.1021/ie030199zSearch in Google Scholar
© 2008, Carl Hanser Verlag, Munich