Skip to main content
Log in

A magnetic method for non destructive monitoring of fiber dispersion and orientation in steel fiber reinforced cementitious composites—part 1: method calibration

  • Original Article
  • Published:
Materials and Structures Aims and scope Submit manuscript

Abstract

Steel fiber reinforced concrete (SFRC) is a composite material which is becoming more and more widely employed in building construction. The mechanical behaviour of the material and the performance of structural elements may significantly depend on the fiber dispersion and orientation with respect to the stress pattern. Non-destructive monitoring of fiber dispersion related issues hence becomes of the foremost importance in order to reliably anticipate the structural performance of elements made with fiber reinforced cementitious composites (FRCCs), as well as for quality control during manufacturing. In this paper a new method for the detection of fiber density and orientation is presented, which is based on the employment of a probe sensitive to the magnetic properties of the steel fibers. The presence and the relative position of steel fibers modify the flux linked by the winding of the probe thus resulting in an impedance variation. The local average concentration and orientation of the fibers can be thus assessed by measuring the variation of the probe inductance. The performance of the method has been analyzed with reference to a self-consolidating high performance FRCC slab and thoroughly verified by means of comparison with destructive monitoring of fiber local concentration and orientation. Besides its good sensitivity, the method is also characterized by ease of use, since it just requires to lean the probe on the surface of the specimen, without any particular care about the coupling. This guarantees a high degree of repeatability and low uncertainty in the measurements, even, e.g. on vertical elements or slabs accessible from the bottom.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

References

  1. Romualdi JP, Batson GB (1964) Tensile strength of concrete affected by uniformly distributed and closely spaced short lengths of wire reinforcement. ACI J 61(6):657–672

    Google Scholar 

  2. Model Code (2010) 1st complete draft, March 2010, 2 vol

  3. Bayasi MZ, Soroushian P (1992) Effect of steel fiber reinforcement on fresh mix properties of concrete. ACI Mater J 89(2):369–374

    Google Scholar 

  4. Ferrara L, Meda A (2006) Relationships between fibre distribution, workability and the mechanical properties of SFRC applied to precast roof elements. Mater Struct 39(4):411–420

    Article  Google Scholar 

  5. Ferrara L, Park YD, Shah SP (2008) Correlation among fresh state behaviour, fiber dispersion and toughness properties of SFRCs. ASCE J Mater Civ Eng 20(7):493–501

    Article  Google Scholar 

  6. Stahli P, Custer R, van Mier JGM (2008) On flow properties, fibre distribution, fibre orientation and flexural behaviour of FRC. Mater Struct 41(1):189–196

    Article  Google Scholar 

  7. Ferrara L, Ozyurt N, di Prisco M (2011) High mechanical performance of fiber reinforced cementitious composites: the role of “casting-flow” induced fiber orientation. Mater Struct 44(1):149–168

    Article  Google Scholar 

  8. Martinie L, Roussel N (2010) Fiber reinforced cementitious materials: from intrinsic isotropic behaviour to fiber alignment. In: Khayat KH, Feys D (eds) Design, production and placement of self-consolidating concrete, proceedings of the 6th international RILEM symposium on SCC and the 4th North American conference on the design and use of SCC, SCC 2010, 26–29 September 2010. Springer, Montreal, pp 407–416

    Google Scholar 

  9. Brandt AM (1985) On the optimal direction of short metal fibres in brittle matrix composites. J Mater Sci 20:3841–3850

    Article  Google Scholar 

  10. Brandt AM (1986) Influence of the fibre orientation on the energy absorption at fracture of SFRC specimens. In: Brandt AM, Marshall IH (eds) Brittle matrix composites 1. Elsevier Applied Science Publishers, London, pp 403–420

    Chapter  Google Scholar 

  11. Brandt AM (1987) Influence of the fibre orientation on the mechanical properties of fibre reinforced cement (FRC) specimens. In: Proceedings of international congress RILEM, vol 2, pp 651–658

  12. Stroeven P, Shah SP (1978) Use of radiography-image analysis for steel fiber reinforced concrete. In: Swamy RN (ed) Testing and test methods of fiber cement composites. Construction Press, Lancaster, pp 345–353

    Google Scholar 

  13. Ferrara L, Dozio D, di Prisco M (2007) On the connections between fresh state behavior, fiber dispersion and toughness properties of steel fiber reinforced concrete. In: Naaman A, Rheinhardt HW (eds) Proceedings of the 5th international RILEM workshop on high performance fiber reinforced cementitious composites, HPFRCC5, 11–13 July 2007, Mainz, Germany. RILEM Publications. PRO 53, pp 249–258

  14. Vandewalle L, Heriman G, van Rickstal F (2008) Fibre orientation in self-compacting fibre reinforced concrete. In: Gettu R (ed) Fiber reinforced concrete: design and applications, proceedings of the 7th international RILEM symposium, BEFIB 2008, 17–19 September 2008, Chennai, India. RILEM Publications. PRO 60, pp 719–728

  15. Grunewald S (2004) Performance based design of self compacting steel fiber reinforced concrete. PhD Thesis, Delft University of Technology

  16. Torrijos MC, Barragan BE, Zerbino RL (2010) Placing conditions, mesostructural characteristics and post-cracking response of fiber reinforced self-compacting concretes. Constr Build Mater 24:1078–1085

    Article  Google Scholar 

  17. Sanal I, Ozyurt N (2010) Effects of formwork dimensions on the performance of fiber-reinforced cement based materials. In: Proceedings of the 9th international congress on advances in civil engineering, 27–30 September 2010, Trabzon, Turkey

  18. Molins Borrel C, Martinez Martinez JA, Arnaiz Alvaro N (2008) Distribucion de fibras de acero en probetas prismaticas de hormigon. In: Proceedings IV Congreso Internacional de Estructuras de la Asociación Científico-tecnica del Hormigón Estructural, Valencia, Espana (in Spanish)

  19. Ozyurt N, Woo LY, Mason TO, Shah SP (2006) Monitoring fiber dispersion in fiber reinforced cementitious materials: comparison of AC impedance spectroscopy and image analysis. ACI Mater J 103(5):340–347

    Google Scholar 

  20. Woo LY, Wansom S, Ozyurt N, Mu B, Shah SP, Mason TO (2005) Characterizing fiber dispersion in cement composites using AC Impedance Spectrometry. Cem Concr Compos 27:627–636

    Article  Google Scholar 

  21. Ozyurt N, Mason TO, Shah SP (2006) Non destructive monitoring of fiber orientation using AC-IS: an industrial scale application. Cem Concr Res 36:1653–1660

    Article  Google Scholar 

  22. Douglas JF, Garboczi EJ (1995) Intrinsic viscosity and the polarizability of particles having a wide range of shapes. In: Advances in chemical physics, vol XCI. Wiley, New York, pp 2265–2270

  23. Ozyurt N, Mason TO, Shah SP (2007) Correlation of fiber dispersion, rheology and mechanical performance of FRCs. Cem Concr Compos 29:70–79

    Article  Google Scholar 

  24. Lataste JF, Behloul M, Breysse D (2008) Characterisation of fibres distribution in a steel fibre reinforced concrete with electrical resistivity measurements. NDT & E Int 41(8):638–647

    Article  Google Scholar 

  25. Barnett S, Lataste JF, Parry T, Millard SG, Soutsos MN (2010) Assessment of fibre orientation in ultra high performance fiber reinforced concrete and its effect on flexural strength. Mater Struct 43(7):1009–1023

    Article  Google Scholar 

  26. Van Damme S, Franchois A, De Zutter D, Taerwe L (2009) Nondestructive determination of the steel fiber content in concrete slabs with an open-ended coaxial probe. IEEE Trans Geosci Remote Sens 42(11):2511–2521

    Article  Google Scholar 

  27. Ferrara L, Faifer M, Muhaxheri M, Toscani S (2011) A magnetic method for non destructive monitoring of fiber dispersion and orientation in steel fiber reinforced cementitious composites. Part 2: correlation to tensile fracture toughness. Mater Struct. doi:10.1617/s11527-011-9794-x

  28. Ferrara L, di Prisco M, Lamperti MGL (2010) Identification of the stress-crack opening behavior of HPFRCC: the role of flow-induced fiber orientation. In: Oh BH et al (eds) Proceedings FraMCoS 7, 23–28 May 2010, Jiejiu, South Korea, pp 1541–1550

  29. di Prisco M, Lamperti MGL, Lapolla S (2010) On Double Edge Wedge Splitting test: preliminary results. In: Oh BH et al (eds) Proceedings FraMCoS 7, 23–28 May 2010, Jiejiu, South Korea, pp 1533–1540

  30. Soroushian P, Lee CD (1990) Distribution and orientation of fibers in steel fiber reinforced concrete. ACI Mater J 87(5):433–439

    Google Scholar 

  31. Faifer M, Ottoboni R, Toscani S, Ferrara L (2011) Non-destructive testing of steel fiber reinforced concrete using a magnetic approach. IEEE Trans Instrum Meas 60(5):1709–1717

    Article  Google Scholar 

Download references

Acknowledgments

The authors wish to acknowledge the help of Mr. Stefano Bufalino in performing experimental measurements and tests and reducing data, in partial fulfilment of the requirements for his BSc in Civil and Environmental Engineering.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Liberato Ferrara.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Ferrara, L., Faifer, M. & Toscani, S. A magnetic method for non destructive monitoring of fiber dispersion and orientation in steel fiber reinforced cementitious composites—part 1: method calibration. Mater Struct 45, 575–589 (2012). https://doi.org/10.1617/s11527-011-9793-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1617/s11527-011-9793-y

Keywords

Navigation