Abstract
A series of 40 precast prestressed roof elements was cast, employing a self-compacting steel fibre reinforced concrete (SCSFRC). They are being used in an industrial building. The fibre distribution within the roof elements was investigated by means of a suitable test procedure and correlated with results obtained from cube samples drawn from the batches and tested in the fresh state. Companion slabs were also cast and tested under four point bending, in order to study the correlation between fibre distribution and the mechanical properties of the composite. The work presented here analyses the correlation between fibre distribution, workability and mechanical properties of steel fibre reinforced concrete (SFRC) with the aim of optimising both its fresh- and hardened-state properties for a series production of precast SFRC roof elements.
Similar content being viewed by others
References
Batson G, Jenkins E, Spatney R (1972) Steel fibers as shear reinforcement in beams. ACI Journal 69: 640–644.
di Prisco M, Iorio F, Plizzari G (2003) HPSFRC prestressed roof elements. Proc. Int. Rilem Workshop on “Test and Design Methods for Steel Fibre Reinforced Concrete–-Background and Experiences”, Bochum, March, B. Schnütgen and L. Vandewalle, Rilem Pubs. pp. 161–188.
Elliot KS, Peaston CH, Paine KA (2002) Experimental and theoretical investigation of the shear resistance of steel fibre reinforced prestressed concrete X-beams–-Part I and Part II. Materials and Structures, 35:519–535.
Bui VK, Geiker MR, Shah SP (June, 2003) Rheology of fiber-reinforced cementitious materials. Proc. HPFRCC4 Workshop, Ann Arbor, USA, A. E. Naaman and H.W. Reinhardt eds., Rilem Pubs. pp. 221–231.
Bayasi MZ, Soroushian P (1992) Effect of steel fiber reinforcement on fresh mix properties of concrete. ACI Materials Journal, 89:369–374.
Ramakrishnan V, Brandshaug T, Coyle W, Schrader EK (1980) A comparative evaluation of concrete reinforced with straight fibers and fibers with deformed ends glued together into bundles. ACI Journal, 77(3):135–143.
Edgington J, Hannant DJ (1972) Steel fibre reinforced concrete: the effect on fibre orientation of compaction by vibration. Materiaux et Constructions, 5:41–44.
Barragàn B (2002) Failure and toughness of steel fiber reinforced concrete under tension and shear. Doctoral Thesis, UPC Barcelona 151$+$appendices.
Meda A, Plizzari G, Sonzogni F, Lamperti T (November, 2002) Fibre distribution in fibre-reinforced structural elements. Proc. CTE Conf., Mantova, pp. 247–256 (in Italian).
Ferrara L (2003) The use of viscosity enhancing admixtures to improve the homogeneity of fibre distribution in steel fibre reinforced concretes. Proc. BMC-7, Warszawa, October, A. Brandt et al. eds., Woodhead Pub. Ltd., pp. 287–300.
Groth P, Nemegeer D (1999) The use of steel fibres in self-compacting concrete. Proceedings 1st Int. Rilem Symp. on Self-Compacting Concrete, Stockholm, September, A. Skarendahl and Ö Petersson eds., Rilem, pp. 497–507.
Grünewald S, Walraven JC, Obladen B, Zegwaard JW, Langbroek M, Nemegeer D (2003) Tunnel segments of self-compacting steel fibre reinforced concrete. Proc. 3rd Int. Rilem Symp. on SCC, Reykiavik, August, O. Wallevik and I. Nielsson eds., Rilem Pubs.
Lappa ES, van der Veen C, Walraven JC (2003) Self-compacting, high-strength steel fibre-reinforced mortar for precast sheet piles. Proc. 3rd Int. Rilem Symp. on SCC, Reykiavik, August, O. Wallevik and I. Nielsson eds., Rilem Pubs.
Khayat KH, Roussel Y (1997) Use of viscosity-modifying admixtures to enhance stability of fluid concrete. ACI Materials Journal, 94:332–340.
UNI 11039 (2003) Steel fibre reinforced concrete–-Part I: Definitions, classification specification and conformity–-Part II: test method for measuring first crack strength and ductility indexes. Italian National Board for Standardization.
Markovich I, Grünewald S, Walraven JC (2002) Characterization of bond between steel fibres and concrete–-conventional fibre reinforced versus self-compacting fibre reinforced concrete. Proc. Bond in Concrete–-from research to standards, Budapest, November, G. Balazs et al. eds., pp. 520–528
Ferrara L, Toniolo G (May, 2002) Continuing statistical control of concrete production: reliability and safety factors. Proc. BIBM 2002, Istanbul, (Cdrom).
Soroushian P, Lee CD (1990) Tensile strength of steel fiber reinforced concrete: correlation with some measures of fiber spacing. ACI Materials Journal, 87(6):541–546.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ferrara, L., Meda, A. Relationships between fibre distribution, workability and the mechanical properties of SFRC applied to precast roof elements. Mater Struct 39, 411–420 (2006). https://doi.org/10.1617/s11527-005-9017-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1617/s11527-005-9017-4