Abstract
Materials for the electromagnetic interference (EMI) shielding of electronics and radiation sources are reviewed, with emphasis on composite materials and resilient EMI gasket materials, which shield mainly by reflection of the radiation at a high frequency.
Similar content being viewed by others
References
D. Bjorklof: Compl. Eng., 1998, vol. 15 (5).
R. Brewer and G. Fenical: Eval. Eng., 1998, vol. 37 (7), pp. S-4–S-10.
P. O’Shea: Eval. Eng., 1998, vol. 37 (6), pp. 40, 43, 45, and 46.
R.S.R. Devender: Proc. Int. Conf. Electromagnetic Interference and Compatibility, IEEE, Piscataway, NJ, 1997, pp. 459–66.
B. Geddes: Control, 1996, vol. 9 (10).
S. Hempelmann: Galvanotechnik, 1997, vol. 88 (2), pp. 418–24.
W.D. Kimmel and D.D. Gerke: Med. Dev. Diagn. Industry, 1995, vol. 17 (7), pp. 112–15.
H.W. Markstein: Electr. Packaging Prod., 1995, vol. 35 (2).
K.A. McRae: National Conf. Publication—Institution of Engineers, Australian, IE Aust, Crows Nest, NSW, Australia, 1994, vol. 2 (94/11), pp. 495–98.
V.V. Sadchikov and Z.G. Prudnikova: Stalag Steel, 1997, Apr., No. 4, pp. 66–69.
S. Shinagawa, Y. Kumagai, and K. Urabe: J. Porous Mater., 1999, vol. 6 (3), pp. 185–90.
B.C. Jackson and G. Shawhan: IEEE Int. Symp. Electromagnetic Compatibility, IEEE, Piscataway, NJ, 1998, vol. 1, pp. 567–72.
R. Kumar, A. Kumar, and D. Kumar: Proc. Int. Conf. Electromagnetic Interference and Compatibility, IEEE, Piscataway, NJ, 1997, pp. 447–50.
L.G. Bhatgadde and S. Joseph: Proc. Int. Conf. Electromagnetic Interference and Compatibility, IEEE, Piscataway, NJ, 1997, pp. 443–45.
A. Sidhu, J. Reike, U. Michelsen, R. Messinger, E. Habiger, and J. Wolf: IEEE Int. Symp. Electromagnetic Compatibility, IEEE, Piscataway, NJ, 1997, pp. 102–05.
J. Hajdu: Trans. Inst. Met. Finishing, 1997, vol. 75, part 1, pp. B7-B10.
G. Klemmer: Special Areas Annual Technical Conf.—ANTEC, Conf. Proc., Society of Plastics Engineers, Brookfield, CT, 1996, vol. 3, pp. 3430–32.
D. Gwinner, P. Scheyrer, and W. Fernandez: Proc. Annual Technical Conf.—Society of Vacuum Coaters, Society of Vacuum Coaters, Albuquerque, NM, 1996, p. 336.
M.S. Bhatia: Proc. 1995 4th Int. Conf. Electromagnetic Interference and Compatibility, IEEE, Piscataway, NI, 1995, pp. 321–24.
L. Zhang, W. Li, J. Liu, and B. Ren: Cailiao Gongcheng/J. Mater. Eng., 1995, July, No. 7, pp. 38–41.
N.V. Mandich: Plating Surf. Finishing, 1994, vol. 81 (10), pp. 60–63.
B.C. Jackson and V. Kuzyk: IEEE Conf. Publication No. 396, IEEE, Stevenage, England, 1994, pp. 119–24.
C. Nagasawa, Y. Kumagai, K. Urabe, and S. Shinagawa: J. Porous Mater., 1999, vol. 6 (3), pp. 247–54.
D.S. Dixon and J. Masi: IEEE Int. Symp. Electromagnetic Compatibility, IEEE, Piscataway, NJ, 1998, pp. 1035–40.
P.J.D. Mason: Proc. Annual Technical Conf.—Society of Vacuum Coaters, Society of Vacuum Coaters, Albuquerque, NM, 1994, pp. 192–97.
C.A. Grimes: IEEE Aerospace Applications Conf. Proc., IEEE, Computer Society Press, Los Alamos, CA, 1994, pp. 211–21.
W.J. Biter, P.J. Jamnicky, and W. Coburn: Int. SAMPE Electronics Conf., SAMPE, Covina, CA, 1994, vol. 7, pp. 234–42.
L. Xing, J. Liu, and S. Ren: Cailiao Gongcheng/J. Mater. Eng., 1998, No. 1, pp. 19–21.
L. Rupprecht and C. Hawkinson: Med. Dev. Diagn. Industry, 1999, vol. 21 (1).
S. Tan, M. Zhang, and H. Zeng: Cailiao Gongcheng/J. Mater. Eng., 1998, No. 5, pp. 6–9.
R. Charbonneau: Proc. Int. SAMPE Symp. Exhib., SAMPE, Covina, CA, 1998, vol. 43 (1), pp. 833–44.
J.M. Kolyer: Proc. Int. SAMPE Symp. Exhib., SAMPE, Covina, CA, 1998, vol. 43 (1), pp. 810–22.
S.L. Thompson: Eval. Eng., 1998, vol. 37 (7), pp. 62, 63, and 65.
D.A. Olivero and D.W. Radford: J. Reinforced Plastics Composites, 1998, vol. 17 (8), pp. 674–90.
K.P. Sau, T.K. Chaki, A. Chakraborty, and D. Khastgir: Plastics Rubber Composites Processing Applications, 1997, vol. 26 (7), pp. 291–97.
W.B. Genetti, B.P. Grady, and E.A. O’Rear: Materials Research Society Symp. Proc., MRS, Warrendale, PA, 1997, vol. 445, pp. 153–58.
J. Mao, J. Chen, M. Tu, W. Huang, and Y. Liu: Gongneng Cailiao/J. Functional Mater., 1997, vol. 28 (2), pp. 137–39.
L. Rupprecht: Proc. Conf. Plastics for Portable and Wireless Electronics, Society of Plastics Engineers, Brookfield, CT, 1996, pp. 12–20.
B.K. Bachman: Proc. Conf. Plastics for Portable and Wireless Electronics, Society of Plastics Engineers, Brookfield, CT, 1996, pp. 7–11.
S. Schneider: Kunststoffe Plast. Eur., 1997, vol. 87 (4), pp. 487–88.
S. Schneider: Kunstetoffe Plast. Eur., 1997, vol. 87 (4), p. 26.
C.-Y. Huang and J.-F. Pai: J. Appl. Polymer Sci., 1997, vol. 63 (1), pp. 115–23.
M.W.K. Rosenow and J.A.E. Bell: Materials Annual Tech. Conf.—ANTEC, Conf. Proc., Society of Plastics Engineers, Brookfield, CT, 1997, vol. 2, pp. 1492–98.
M.W.K. Rosenow and J.A.E. Bell: Proc. Int. SAMPE Symp. Exhib., SAMPE, Covina, CA, 1998, vol. 43 (1), pp. 854–64.
M.A. Saltzberg, A.L. Neller, C.S. Harvey, T.E. Borninski, and R.J. Gordon: Circuit World, 1996, vol. 22 (3), pp. 67 and 68.
J. Wang, V.V. Varadan, and V.K. Varadan: SAMPE J., 1996, vol. 32 (6), pp. 18–22.
J.V. Masi and D.S. Dixon: Int. SAMPE Electronics Conf., SAMPE, Covina, CA, 1994, vol. 7, pp. 243–51.
H. Rahman, J. Dowling, and P.K. Saha: J. Mater. Proc. Technol., 1995, vol. 54 (1–4), pp. 21–28.
A.A. Dani and A.A. Ogale: Int. SAMPE Tech. Conf., SAMPE, Covina, CA, 1994, vol. 26, pp. 689–99.
D.W. Radford, J. Adv. Mater., 1994, vol. 26 (1), pp. 45–53.
C.M. Ma, A.T. Hu, and D.K. Chen: Polymers Polymer Composites, 1993, vol. 1 (2), pp. 93–99.
K. Miyashita and Y. Imai: Int. Progress Urethanes, 1993, vol. 6, pp. 195–218.
L. Li, P. Yih and D.D.L. Chung: J. Electronic Mater., 1992, vol. 21 (11), pp. 1065–71.
L. Li and D.D.L. Chung: Composites, 1994, vol. 25 (3), pp. 215–24.
L. Li and D.D.L. Chung: Polymer Composites, 1993, vol. 14 (5), pp. 361–66.
L. Li and D.D.L. Chung: Polymer Composites, 1993, vol. 14 (6), pp. 467–72.
L. Li and D.D.L. Chung: Composites, 1991, vol. 22 (3), pp. 211–18.
M. Zhu and D.D.L. Chung: J. Electronic Packaging, 1991, vol. 113, pp. 417–20.
M. Zhu and D.D.L. Chung: Composites, 1992, vol. 23 (5), pp. 355–64.
J.A. Pomposo, J. Rodriguez, and H. Grande: Synth. Met., 1999, vol. 104 (2), pp. 107–11.
J.-S. Park, S.-H. Ryn and O.-H. Chung: Annual Technical Conf.—ANTEC, Conf. Proc., Society of Plastics Engineers, Brookfield, CT, 1998, pp. 2410–14.
S. Courric and V.H. Tran: Polymer, 1998, vol. 39 (12), pp. 2399–2408.
M. Angelopoulos: Proc. Conf. Plastics for Portable and Wireless Electronics, Society of Plastics Engineers, Brookfield, CT, 1997, pp. 66.
T. Makela, S. Pienimaa, T. Taka, S. Jussila, and H. Isotalo: Synth. Met., 1997, vol. 85 (1–3), pp. 1335–36.
R.S. Kohlman, Y.G. Min, A.G. MacDiarmid, and A.J. Epstein: J. Eng. Appl. Sci., 1996, vol. 2, pp. 1412–16.
K. Naishadham: Int. SAMPE Electronics Conf., SAMPE, Covina, CA, 1994, vol. 7, pp. 252–65.
A. Kaynak, A. Polat, and U. Yilmazer: Mater. Res. Bull., 1996, vol. 31 (10), pp. 1195–1206.
A. Kaynak: Mater. Res. Bull., 1996, vol. 31 (7), pp. 845–60.
J. Joo, A.G. MacDiarmid, and A.J. Epstein: Ann. Tech. Conf.—ANTEC, Conf. Proc., Society of Plastic Engineers, Brookfield, CT, 1995, pp. 1672–77.
C.P.J.H. Borgmans and R.H. Glaser: Evaluation Eng., 1995, vol. 34 (7), pp. S-32–S-37.
P. Yan: Sci. Am., 1995, vol. 273 (1), pp. 82–87.
P.J. Mooney: JOM, 1994, vol. 46 (3), pp. 44–45.
H.H. Kuhn, A.D. Child, and W.C. Kimbrell: Synth. Mater., 1995, vol. 71 (1–3), part 3, pp. 2139–42.
M.T. Nguyen and A.F. Diaz: Adv. Mater., 1994, vol. 6 (11), pp. 858–60.
J. Unsworth, C. Conn, Z. Jin, A. Kaynak, R. Ediriweera, P. Innis, and N. Booth: J. Intelligent Mater. Systems Struct., 1994, vol. 5 (5), pp. 595–604.
A. Kaynak, J. Unsworth, R. Clout, A.S. Mohan, and G.E. Beard: J. Appl. Polymer Sci., 1994, vol. 54 (3), pp. 269–78.
A. Kaynak, A.S. Mohan, J. Unsworth, and R. Clout: J. Mater. Sci. Lett., 1994, vol. 13 (15), pp. 1121–23.
W. Sauerer: Galvanotechnik, 1994, vol. 85 (5), pp. 1467–72.
M.P. de Goefe and L.W. Steenbakkers: Kunststoffe Plast. Europe, 1994, vol. 84, pp. 16–18.
X. Fu and D.D.L. Chung: Carbon, 1998, vol. 36 (4), pp. 459–62.
L. Gnecco: Eval. Eng., 1999, vol. 38 (3).
S.-S. Lin: SAMPE J., 1994, vol. 30 (5), pp. 39–45.
Y. Kurosaki and R. Satake: IEEE Int. Symp. Electromagnetic Compatibility, IEEE, Piscataway, NJ, 1994, pp. 739–40.
X. Luo and D.D.L. Chung: Composites: Part B, 1999, vol. 30 (3), pp. 227–31.
M. Zhu, Y. Qiu, and J. Tian: Gongneng Cailiao/J. Functional Mater., 1998, vol. 29 (6), pp. 645–47.
D.A. Case and M.J. Oliver: Compliance Eng., 1999, vol. 16 (2), pp. 40, 42, 44, 46, 48, and 49.
S. Hudak: Eval. Eng., 1998, vol. 37 (8).
B.N. Prakash and L.D. Roy: Proc. Int. Conf. Electromagnetic Interference and Compatibility, IEEE, Piscataway, NJ, 1997, pp. 1 and 2.
S.H. Peng and K. Zhang: Annual Tech. Conf.—ANTEC, Conf. Proc., Society of Plastics Engineers, Brookfield, CT, 1998, vol. 2, pp. 1216–18.
S.K. Das, J. Nuebel, and B. Zand: IEEE Int. Symp. Electromagnetic Compatibility, IEEE, Piscataway, NJ, 1997, pp. 66–71.
S.H. Peng and W.S.V. Tzeng: IEEE Int. Symp. Electromagnetic Compatibility, IEEE, Piscataway, NJ, 1997, pp. 94–97.
P. O’Shea: Eval. Eng., 1997, vol. 36 (8).
P. O’Shea: Eval. Eng., 1996, vol. 35 (8).
Anonymous: Electronic Eng., 1996, vol. 68 (834).
B. Lee: Engineering, 1995, vol. 236 (10), pp. 32–33.
R.A. Rothenberg, D.C. Inman, and Y. Itani: IEEE Int. Symp. Electromagnetic Compatibility, IEEE, Piscataway, NJ, 1994, pp. 818.
B.D. Mottahed and S. Manoochehri: Polymer Eng. Sci., 1997, vol. 37 (3), pp. 653–66.
X. Shui and D.D.L. Chung: J. Electronic Packaging, 1997, vol. 119 (4), pp. 236–38.
X. Shui and D.D.L. Chung: J. Electronic Mater., 1997, vol. 26 (8), pp. 928–34.
X. Shui and D.D.L. Chung: J. Electronic Mater., 1995, vol. 24 (2), pp. 107–13.
Y. Ramadin, S.A. Jawad, S.M. Musameh, M. Ahmad, A.M. Zihlif, A. Paesano, E. Martuscelli, and G. Ragosta: Polymer Int., 1994, vol. 34 (2), pp. 145–50.
M.-S. Lin: IEEE Int. Symp. Electronmagnetic Compatibility, IEEE, Piscataway, NJ, 1994, pp. 112–15.
H.-K. Chiu, M.-S. Lin, and C.H. Chen: IEEE Trans. Electromagnetic Compatibility, 1997, vol. 39 (4), pp. 332–39.
J.C. Roberts and P.D. Weinhold: J. Composite Mater., 1995, vol. 29 (14), pp. 1834–49.
D.A. Olivero and D.W. Radford: SAMPE J., 1997, vol. 33 (1), pp. 51–57.
M. Choate and G. Broadbent: Regional Tech. Conf.—Society of Plastic Engineers, Society of Plastic Engineers, Brookfield, CT, 1996, pp. 69–82.
P.D. Wienhold, D.S. Mehoke, J.C. Roberts, G.R. Seylar, and D.L. Kirkbride: Int. SAMPE Tech. Conf., SAMPE, Covina, CA, 1998, vol. 30, pp. 243–55.
A. Fernyhough and Y. Yokota: Mater. World, 1997, vol. 5 (4), pp. 202–04.
T. Hiramoto, T. Terauchi, and J. Tomibe: Electrical Overstress/Electrostatic Discharge Symp. Proc., ESD Association, Rome, NY, 1998, pp. 18–21.
L.G. Morin Jr. and R.E. Duvall: Proc. Int. SAMPE Symp. Exhib., SAMPE, Covina, CA, 1998, vol. 43 (1) pp. 874–81.
J.R. Gaier and J. Terry: Int. SAMPE Electronics Conf., SAMPE, Covina, CA, 1994, vol. 7, pp. 221–33.
J.R. Gaier, M.L. Davidson, and R.K. Shively: Int. SAMPE Tech. Conf., SAMPE, Covina, CA, 1996, vol. 28, pp. 1136–47.
J.M. Liu, S.N. Vernon, A.D. Hellman, and T.A. Campbell: Proc. SPIE—The International Society of Optical Engineers, Society of Photo-Optical Instrumentation Engineers, Bellingham, WA, 1995, vol. 2459, pp. 60–68.
D.A. Olivero and D.W. Radford: Int. SAMPE Tech. Conf., SAMPE, Covina, CA, 1996, vol. 28, pp. 1110–21.
X. Luo and D.D.L. Chung: Carbon, 1996, vol. 34 (10), pp. 1293–94.
K. Shibata, T. Okabe, K. Saito, T. Okayama, M. Shimada, A. Yamamura, and R. Yamamoto: J. Porous Mater., 1997, vol. 4 (4), pp. 269–75.
T. Okabe, K. Saito, H. Togawa, and Y. Kumagai: Zairyo/J. Soc. Mater. Sci., Japan, 1995, vol. 44 (498), pp. 288–91.
B.M. Rakshit: Proc. 1995 4th Int. Conf. Electromagnetic Interference Compatibility, IEEE, Piscataway, NJ, 1995, pp. 413–415.
C.R. Paul: in Introduction to Electromagnetic Compatibility, K. Chang, ed., Wiley, New York, NY, 1992, pp. 649.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chung, D.D.L. Materials for electromagnetic interference shielding. J. of Materi Eng and Perform 9, 350–354 (2000). https://doi.org/10.1361/105994900770346042
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1361/105994900770346042