Abstract
We report on high-resolution potential imaging of heterogeneous surfaces by means of Kelvin probe force microscopy, working in frequency modulation mode (FM-KPFM), performed in ultrahigh vacuum. To study the limits of potential and lateral resolutions in FM-KPFM, we have investigated clean surface of compound semiconductor InSb(001) and the same surface with some submonolayer coverages of KBr and Au. It was found that long- and short-range bias-dependent interactions, acting between the tip and the surface, could be detected and that both interactions contribute to the measured contact potential difference (CPD) signal. On the one hand, when only the long-range electrostatic interactions between the tip and the surface are active, the CPD map provides the distribution of the local surface potential on the imaged sample with the lateral resolution and the correctness of the measured values depending on the measurement conditions. For this case, the experimental findings were compared with the predictions of theoretical calculations based on a realistic model for the cantilever-sample geometry. On the other hand, when the short-range and bias-dependent interactions are detected, FM-KPFM provides even the sub-nanometer contrast in the CPD signal. In this situation, however, the measured CPD signal is not related to the sample surface potential but reflects the properties of the front tip atom-surface atom interactions.
- Received 20 December 2007
DOI:https://doi.org/10.1103/PhysRevB.77.235427
©2008 American Physical Society