Register      Login
Soil Research Soil Research Society
Soil, land care and environmental research
RESEARCH ARTICLE

Prediction of three key hydraulic properties in a soil survey of a small forested catchment

D. A. O'Connell and P. J. Ryan

Australian Journal of Soil Research 40(2) 191 - 206
Published: 15 March 2002

Abstract

Direct measurement of ψ(θ) and K(θ) relationships at all observation sites in soil survey is not feasible. Three key hydraulic properties — water content at field capacity (θ–5 kPa), water content at wilting point (θ–1.5 MPa), and saturated hydraulic conductivity (Ks) — can be used to derive K(θ) and ψ(θ) when combined with bulk density. These properties were measured in 'calibration' horizons in a soil survey in Yambulla State Forest in south-east New South Wales.

Pedotransfer functions (PTFs) for predicting θ-5 kPa, θ–1.5 MPa, and Ks from the physical and morphologic soil attributes are presented and evaluated here. Models for predicting θ–5 kPa and θ–1.5 MPa relied on per cent clay. An R2 of 0.64 (for θ–5 kPa) to 0.67 (for θ–1.5 MPa) was obtained for linear regressions using only morphologic explanatory variables. An R2 of 0.73 (for θ–5 kPa) to 0.90 (for θ–1.5 MPa) was obtained if laboratory-measured clay content was included as an explanatory variable.

Ks was measured in situ using well permeameters, and used for developing PTFs. Large cores were taken from a small subsample of horizons and measurements of Ks, K–0.1 kPa, K–0.2 kPa, and K–0.5 kPa were made in the laboratory. Ks measurements from well permeameters were similar to K-0.5 kPa from laboratory measurements.

Regression and tree models were used to predict Ks. The linear regression had an R2 of 0.55, while the tree models accounted for approximately 40% reduction in deviance. Bulk density was the most useful predictor in all Ks models. The inclusion of per cent rock fragments, bulk density, and estimated percentage clay as useful explanatory variables demonstrated the utility of functional descriptors not routinely measured in soil survey.

The models are empirical and were locally calibrated for use in a soil survey. They may be applicable in target domains similar to the source domain (i.e. coarse-grained adamellite soils in similar climatic regimes).

surrogates, saturated hydraulic conductivity, K(θ), ψ(θ), Ks, pedotransfer functions, soil survey, soil morphology, PTF.

Keywords: surrogates, saturated hydraulic conductivity, K(&thgr; ), ψ (&thgr; ), Ks, pedotransfer functions, soil survey, soil morphology, PTF.

https://doi.org/10.1071/SR01036

© CSIRO 2002

Committee on Publication Ethics


Export Citation Cited By (11) Get Permission

View Dimensions