Issue 100, 2015

Ultrathin amorphous silicon thin-film solar cells by magnetic plasmonic metamaterial absorbers

Abstract

Efficient solar harvesting for ultrathin amorphous silicon (α-Si) films with a thickness of less than 100 nm is critical to the performance of solar cells, since the very short carrier-diffusion length of α-Si and the Staebler–Wronski effect restrict their thickness. In this work, we numerically investigate energy harvesting in metamaterial-based solar cells, in which an ultrathin α-Si film is sandwiched between a silver (Ag) substrate and a square array of Ag nanodisks, and combined with an indium tin oxide (ITO) anti-reflection layer. It is found that only a 20 nm-thick α-Si film is able to absorb over 50% solar energy in the spectral range from 300 to 800 nm at normal incidence, and the amount of absorbed light is equivalent to a photocurrent of about 13.4 mA cm−2. This broadband absorption is achieved by the spectral design on the overlapped absorption peaks which are caused by the excitations of two lowest-order Fabry–Pérot (FP) resonances in the α-Si and ITO layers and a magnetic resonance arising from the plasmon hybridization between Ag disks and the substrate. The absorption performance of our structure is less dependent on the incident angle θ and polarization of light when θ < 20°, but it will decrease dramatically when θ > 70° (20°) for P (S) polarization.

Graphical abstract: Ultrathin amorphous silicon thin-film solar cells by magnetic plasmonic metamaterial absorbers

Article information

Article type
Paper
Submitted
30 Jul 2015
Accepted
21 Sep 2015
First published
21 Sep 2015

RSC Adv., 2015,5, 81866-81874

Ultrathin amorphous silicon thin-film solar cells by magnetic plasmonic metamaterial absorbers

C. Tang, Z. Yan, Q. Wang, J. Chen, M. Zhu, B. Liu, F. Liu and C. Sui, RSC Adv., 2015, 5, 81866 DOI: 10.1039/C5RA15177E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements