Issue 18, 2013

Quasi-solid DSSC based on a gel-state electrolyte of PAN with 2-D graphenes incorporated

Abstract

A hybrid polymer gel electrolyte (PGE) comprising of polyacrylonitrile (PAN) with graphene incorporated in a mixture of iodide redox electrolyte was prepared for the first time for use in quasi-solid dye-sensitized solar cells (DSSC). The exfoliated 2-D graphenes were dispersed homogenously within the PGE and facilitate the diffusion of Iāˆ’/I3āˆ’ ion pairs in the electrolyte system. The ratio of graphene in the PAN PGE was optimized to maximize the ionic conductivity and photoelectronic properties of the DSSC. The energy conversion efficiency of the DSSC achieved by using this hybrid PGE with 0.2 wt% Gr is 5.41%, which is 1.5 times the value of the liquid-state cell (3.72%).

Graphical abstract: Quasi-solid DSSC based on a gel-state electrolyte of PAN with 2-D graphenes incorporated

Supplementary files

Article information

Article type
Communication
Submitted
30 Dec 2012
Accepted
18 Mar 2013
First published
19 Mar 2013

J. Mater. Chem. A, 2013,1, 5479-5486

Quasi-solid DSSC based on a gel-state electrolyte of PAN with 2-D graphenes incorporated

Y. Chan, C. Wang and C. Chen, J. Mater. Chem. A, 2013, 1, 5479 DOI: 10.1039/C3TA01684F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements