Issue 8, 2011

All-carbon-nanofiber electrodes for high-energy rechargeable Li–O2 batteries

Abstract

Hollow carbon fibers with diameters on the order of 30 nm were grown on a ceramic porous substrate, which was used as the oxygen electrode in lithium-oxygen (Li–O2) batteries. These all-carbon-fiber (binder-free) electrodes were found to yield high gravimetric energies (up to 2500 W h kgdischarged−1) in Li–O2cells, translating to an energy enhancement ∼4 times greater than the state-of-the-art lithium intercalation compounds such as LiCoO2 (∼600 W h kgelectrode−1). The high gravimetric energy achieved in this study can be attributed to low carbon packing in the grown carbon-fiber electrodes and highly efficient utilization of the available carbon mass and void volume for Li2O2 formation. The nanofiber structure allowed for the clear visualization of Li2O2 formation and morphological evolution during discharge and its disappearance upon charge, where Li2O2 particles grown on the sidewalls of the aligned carbon fibers were found to be toroids, having particle sizes increasing (up to ∼1 μm) with increasing depth-of-discharge. The visualization of Li2O2 morphologies upon discharge and disappearance upon charge represents a critical step toward understanding key processes that limit the rate capability and low round-trip efficiencies of Li–O2 batteries, which are not currently understood within the field.

Graphical abstract: All-carbon-nanofiber electrodes for high-energy rechargeable Li–O2 batteries

Supplementary files

Article information

Article type
Paper
Submitted
20 Apr 2011
Accepted
06 Jun 2011
First published
12 Jul 2011

Energy Environ. Sci., 2011,4, 2952-2958

All-carbon-nanofiber electrodes for high-energy rechargeable Li–O2 batteries

R. R. Mitchell, B. M. Gallant, C. V. Thompson and Y. Shao-Horn, Energy Environ. Sci., 2011, 4, 2952 DOI: 10.1039/C1EE01496J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements