Issue 16, 2011
From the journal:

Journal of Materials Chemistry

Using the photothermal effect to improve membrane separations via localized heating†

Katrien Vanherck,a   Sanne Hermans,a   Thierry Verbiestb  and  Ivo Vankelecom*a  

* Corresponding authors

a Centre for Surface Chemistry and Catalysis, Department Microbial and Molecular Systems, Kasteelpark Arenberg 23, P.O. Box 2461, Heverlee, Belgium
E-mail: ivo.vankelecom@biw.kuleuven.be
Fax: +32 16 32 19 98
Tel: +32 16 32 15 94

b Molecular and Nanomaterials, Department of Chemistry, Celestijnenlaan 200d—P.O. Box 2425, Heverlee, Belgium
Fax: +32 16 32 79 82
Tel: +32 16 32 71 54

Abstract

A new strategy is presented to achieve local heating of a membrane during a separation process, thereby increasing the membrane fluxes without affecting the membrane selectivity. By incorporating gold nanoparticles into a membrane structure, it is possible to heat the membrane during the separation process by light irradiation, applying the principle of photothermal heating. Gold nanoparticles are generated inside a premade cellulose acetate membrane. This composite material is characterized by electron microscopy and ultraviolet-visible spectroscopy. The effect of the photothermal heating of the gold nanoparticles on the membrane temperature, flux and selectivity is investigated by irradiation with a continuous wave argon-ion laser operating at 514 nm in a specially adapted filtration cell. It is shown for membranes containing a gold to polymer weight ratio of no more than 2% that water fluxes are increased by 15% while pure solvent fluxes can be increased up to 400% for ethanol and isopropanol. There is no significant effect of the photothermal heating on the rejection of the dye bromothymol blue in ethanol filtrations. To increase fluxes of a given membrane without lowering its selectivity is a highly desired but rarely found effect in membrane technology. The described method is most applicable for solvents with low thermal conductivity values, as energy loss by transfer to the medium is then occurring at a slow rate.

Graphical abstract: Using the photothermal effect to improve membrane separations via localized heating

About
Cited by
Related
Download options Please wait...

Supplementary files

Article information

DOI
https://doi.org/10.1039/C0JM03932B
Article type
Paper
Submitted
15 Nov 2010
Accepted
31 Jan 2011
First published
09 Mar 2011

J. Mater. Chem., 2011,21, 6079-6087

Permissions

Request permissions

Using the photothermal effect to improve membrane separations via localized heating

K. Vanherck, S. Hermans, T. Verbiest and I. Vankelecom, J. Mater. Chem., 2011, 21, 6079 DOI: 10.1039/C0JM03932B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements