Abstract
On the basis of the statistical analysis of physicomechanical characteristics of the surface layer of specimens of VT14 titanium alloy obtained by the acoustic method, we study distinctive features of the kinetic dependences of an empirical parameter connected with the structural inhomogeneity of the metal. This enables us to identify typical stages of the process of fatigue damage.
Similar content being viewed by others
REFERENCES
V. T. Troshchenko, A. Ya. Krasovskii, V. V. Pokrovskii, et al., Deformation and Fracture Resistance of Materials. A Handbook [in Russian], Part 2, Naukova Dumka, Kiev (1994).
B. A. Gryaznov, V. T. Troshchenko, Yu. S. Nalimov, et al., “Fatigue strength and cyclic crack-growth resistance of VT3-1 titanium alloy in various structural compounds. Part 2. Discussion of the results,” Probl. Prochn., No. 5-6, 12–17 (1995).
J. L. Bogdanoff and F. Kozin, Probabilistic Models of Cumulative Damage, Wiley, New York (1985).
L. E. Matokhnyuk, Accelerated Fatigue Tests by High-Frequency Loading [in Russian], Naukova Dumka, Kiev (1988).
G. G. Pisarenko, A. V. Voinalovich, Yu. M. Golovanev, and I. M. Vasinyuk, “Regularities of the behavior of stochastic properties of titanium alloys under cyclic loading,” Probl. Prochn., No. 3, 80–87 (2001).
S. G. Glazunov and V. N. Moiseev, Structural Titanium Alloys [in Russian], Metallurgiya, Moscow (1974).
E. S. Pereverzev, D. G. Borshchevskaya, I. A. Diskovskii, and T. Ya. Évina, “Changes in the physicomechanical characteristics of VT14 titanium alloy in the process of long-term loading,” Probl. Prochn., No. 2, 144–148 (2000).
B. A. Kolachev, Physical Metallurgy of Titanium [in Russian], Metallurgiya, Moscow (1976).
V. S. Ivanova and V. F. Terent'ev, Nature of Fatigue of Metals [in Russian], Metallurgiya, Moscow (1975).
S. V. Grishakov and A. I. Kovalev, Evaluation of Stresses and Damage in Ferromagnetic Materials by the Method of Magnetic Noises [in Russian], Naukova Dumka, Kiev (1991).
A. I. Radchenko, E. Yu. Korchuk, and V. M. Panteleev, “Evaluation of the fatigue damage to workpieces according to the data of measurements carried out in the incubation stage of fatigue,” in: Abstr. of the Int. Conf. on the Problems of Dynamics and Strength in Gas-Turbine Building [in Ukrainian], Institute of Problems of Strength, National Academy of Sciences of Ukraine, Kiev (2001), p. 184.
T. Yu. Yakovleva, A. V. Voinalovich, and L. E. Matokhnyuk, “Structural changes in the AMg6H alloy under the action of high-frequency asymmetric loading,” Metaloznav. Obrob. Met., No. 4, 74–80 (2000).
T. Yu. Yakovleva, “Application of Fourier optics for quantitative analysis of the evolution of structural states of metals under the conditions of cyclic loading,” Probl. Prochn., No. 2, 81–89 (2000).
T. Yu. Yakovleva, A. V. Voinalovich, and L. E. Matokhnyuk, “Specific features of the formation of dislocation structures in nickel alloy under the action of cyclic loading,” Metaloznav. Obrob. Met., No. 4, 19–25 (2001).
I. N. Bogachev, A. A. Vainshtein, and S. D. Volkov, Statistical Physical Metallurgy [in Russian], Metallurgiya, Moscow (1984).
T. L. Grobstein, G. E. Welsch, N. Paningraphi, and J. D. Mecrervery, “Characterization of lattice defects generated during fatigue cyclic life of Nicole,” in: “Fatigue 84” (Proc. of the Second Int. Conf. on Fatigue and Fatigue Thresholds, Birmingham, September 3-7, 1984), Vol. 2, pp. 1019–1027.
V. T. Troshchenko, L. A. Khamaza, V. V. Pokrovskii, et al., Cyclic Strains and Fatigue of Metals. Vol. 2. Low-and High-Cycle Fatigue of Metals [in Russian], Naukova Dumka, Kiev (1985).
V. V. Fedorov, Thermodynamic Aspects of Strength and Fracture of Solid Bodies [in Russian], Fan, Tashkent (1979).
V. N. Akimov and R. N. Mints, “Exoemission diagnostics and prediction of the fatigue strength of metals,” Defektoskopiya, No. 3, 20–33 (1977).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pisarenko, G.G., Voinalovich, A.V., Golovanev, Y.M. et al. Damageability and Structural Inhomogeneity of VT14 Titanium Alloy under Cyclic Loading. Strength of Materials 35, 594–600 (2003). https://doi.org/10.1023/B:STOM.0000013611.83359.ca
Issue Date:
DOI: https://doi.org/10.1023/B:STOM.0000013611.83359.ca