Skip to main content
SpringerLink
Log in

Contact mechanics of rough surfaces in tribology: multiple asperity contact

  • Published:
Tribology Letters Aims and scope Submit manuscript

Abstract

Contact modeling of two rough surfaces under normal approach and with relative motion is carried out to predict real area of contact and surface and subsurface stresses affecting friction and wear of an interface. When two macroscopically flat bodies with microroughness come in contact, the contact occurs at multiple asperities of arbitrary shapes, and varying sizes and heights. Deformation at the asperity contacts can be either elastic and/or elastic-plastic. If a thin liquid film is present at the interface, attractive meniscus forces may affect friction and wear. Historically, statistical models have been used to predict contact parameters, and these generally require many assumptions about asperity geometry and height distributions. With the advent of computer technology, numerical contact models of 3-D rough surfaces have been developed, particularly in the past decade, which can simulate digitized rough surfaces with no assumptions concerning the roughness distribution. In this article, a comprehensive review of modeling of multiple-asperity contacts in dry and wet conditions is presented. Contact models for homogeneous and layered, elastic and elastic-plastic solids with and without tangential loading are presented. The models reviewed in this paper fall into two groups: (a) analytical solutions for surfaces with well-defined height distributions and asperity geometry and (b) numerical solutions for real surfaces with asperities of arbitrary shape and varying size and height distributions. Implications of these models in friction and wear studies are discussed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. F.P. Bowden and D. Tabor, The Friction and Lubrication of Solids, Part I (Clarendon Press, Oxford, 1950).

    Google Scholar 

  2. F.P. Bowden and D. Tabor, The Friction and Lubrication of Solids, Part II (Clarendon Press, Oxford, 1964).

    Google Scholar 

  3. B. Bhushan, Tribology and Mechanics of Magnetic Storage Devices, 2nd Ed. (Springer, New York, 1996).

    Google Scholar 

  4. A. Majumdar and B. Bhushan, Role of fractal geometry in roughness characterization and contact mechanics of rough surfaces, ASME Journal of Tribology 112 (1990) 205–216.

    Google Scholar 

  5. S. Ganti and B. Bhushan, Generalized fractal analysis and its applications to engineering surfaces, Wear 180 (1995) 17–34.

    Article  Google Scholar 

  6. B. Bhushan, Handbook of Micro/Nanotribology (CRC Press, Boca Raton, FL, 1995).

    Google Scholar 

  7. T.R. Thomas, Rough Surfaces (Longman, London, 1982).

    Google Scholar 

  8. D.J. Whitehouse, Handbook of Surface Metrology (Institute of Physics Publishing, Bristol, 1994).

    Google Scholar 

  9. B. Bhushan and G.S. Blackman, Atomic force microscopy of magnetic rigid disks and sliders and its applications to tribology, ASME Journal of Tribology 113 (1991) 452–457.

    Google Scholar 

  10. J.A. Greenwood and J.B.P. Williamson, Contact of nominally flat surfaces, Proc. Roy. Soc. Lond. A 295 (1966) 300–319.

    CAS  Google Scholar 

  11. D.J. Whitehouse and J.F. Archard, The properties of random surface of significance in their contact, Proc. Roy. Soc. Lond. A 316 (1970) 97–121.

    Google Scholar 

  12. R.A. Onions and J.F. Archard, The contact of surfaces having a random structure, J. Phys. D.: Appl. Phys. 6 (1973) 289–304.

    Article  Google Scholar 

  13. P.R. Nayak, Random process model of rough surfaces in plastic contact, Wear 26 (1973) 305–333.

    Article  Google Scholar 

  14. A.W. Bush, R.D. Gibson and T.R. Thomas, The elastic contact of a rough surface, Wear 35 (1975) 87–111.

    Article  Google Scholar 

  15. A.W. Bush, R.D. Gibson and G.P. Keogh, Strongly aniostropic rough surfaces, ASME Journal of Lubrication Technology 101 (1979) 15–20.

    Google Scholar 

  16. R.D. Gibson, The surface as a random process, Rough Surfaces, ed. T.R. Thomas (Longman, London, 1982).

    Google Scholar 

  17. J.I. McCool, Predicting microfracture in ceramics via a microcontact model, ASME Journal of Tribology 108 (1986) 380–386.

    CAS  Google Scholar 

  18. H.A. Francis, Application of spherical indentation mechanics to reversible and irreversible contact between rough surfaces, Wear 45 (1977) 221–269.

    Article  Google Scholar 

  19. B. Bhushan, Analysis of the real area of contact between a polymeric magnetic medium and a rigid surface, ASME Journal of Tribology 106 (1984) 26–34.

    Google Scholar 

  20. J.I. McCool, Comparison of models for the contact of rough surfaces, Wear 107 (1986) 37–60.

    Article  Google Scholar 

  21. W.R. Chang, I. Etsion and D.B. Bogy, An elastic-plastic model for the contact of rough surfaces, ASME Journal of Tribology 109 (1987) 257–263.

    Google Scholar 

  22. C.A. Kotwal and B. Bhushan, Contact analysis of nongaussian surfaces for minimum static and kinetic friction and wear, Tribol. Trans. 39 (1996) 890–898.

    CAS  Google Scholar 

  23. A. Majumdar and B. Bhushan, Fractal model of elastic-plastic contact between rough surfaces, ASME Journal of Tribology 113 (1991) 1–11.

    Google Scholar 

  24. B. Bhushan and A. Majumdar, Elastic-plastic contact model of bifractal surfaces, Wear 153 (1992) 53–64.

    Article  CAS  Google Scholar 

  25. J.B.P. Williamson, The microtopography of surfaces, Proc. Instn. Mech. Engrs. 182 Part 3k (1967/68) 21–30.

    Article  Google Scholar 

  26. P.K. Gupta and N.H. Cook, Junction deformation models for asperities in sliding interaction, Wear 20 (1972) 73–108.

    Article  Google Scholar 

  27. B. Bhushan and N.H. Cook, On the correlation between friction coefficients and adhesion stresses, ASME J. Eng. and Mat. Technol. 97 (1975) 285–287.

    CAS  Google Scholar 

  28. R.S. Sayles and T.R. Thomas, Computer simulation of the contacting rough surfaces, Wear 49 (1978) 273–296.

    Article  Google Scholar 

  29. C.Y. Poon and B. Bhushan, Comparison of surface roughness measurements by stylus profiler, AFM and non-contact optical profiler, Wear 190 (1995) 76–88.

    Article  CAS  Google Scholar 

  30. F.A. Akyuz and M. Merwin, Solution of nonlinear problems of elastoplasticity by finite element method, AIAA J. 6 (1968) 1825–1831.

    Google Scholar 

  31. K. Komvopoulos and D.H. Choi, Elastic finite element analysis of multi-asperity contact, ASME Journal of Tribology 114 (1992) 823–831.

    Google Scholar 

  32. H.A. Francis, The accuracy of plane-strain models for the elastic contact of three-dimensional rough surfaces, Wear 85 (1983) 239–256.

    Article  Google Scholar 

  33. W.T. Lai and H.S. Cheng, Computer simulation of elastic rough contacts, ASLE Trans. 28 (1985) 172–180.

    Google Scholar 

  34. M.N. Webster and R.S. Sayles, A numerical model for the elastic frictionless contact of real rough surfaces, ASME Journal of Tribology 108 (1986) 314–320.

    Google Scholar 

  35. M.A. West and R.S. Sayles, A 3-dimensional method of studying 3-body contact geometry and stress on real rough surfaces, in: Proc. 14th Leeds-Lyon Symposium on Tribology, Tribology Series 12 (Elsevier, Amsterdam, 1987) pp. 195–200.

    Google Scholar 

  36. A.A. Lubrecht and E. Ioannides, A fast solution of the dry contact problem and associated subsurface stress field using multilevel techniques, ASME Journal of Tribology 113 (1991) 128–133.

    Google Scholar 

  37. N. Ren and S.C. Lee, Contact simulation of three-dimensional rough surfaces using moving grid method, ASME Journal of Tribology 115 (1993) 597–601.

    Google Scholar 

  38. X. Tian and B. Bhushan, A numerical three-dimensional model for the contact of rough surfaces by variational principle, ASME Journal of Tribology 118 (1996) 33–42.

    Google Scholar 

  39. C.Y. Poon and R.S. Sayles, Numerical contact model of a smooth ball on an anisotropic rough surface, ASME Journal of Tribology 116 (1994) 194–201.

    Google Scholar 

  40. T.F. Conry and A. Seireg, A mathematical programming method for design of elastic bodies in contact, ASME Journal of Applied Mechanics 38 (1971) 387–392.

    Google Scholar 

  41. J.J. Kalker and Y. van Randen, A minimum principle for frictionless elastic contact with application to non-hertzian half-space contact problems, J. Eng. Math. 6 (1972) 193–206.

    Article  Google Scholar 

  42. D.M. Bailey and R.S. Sayles, Effect of roughness and sliding friction on contact stresses, ASME Journal of Tribology 113 (1991) 729–738.

    CAS  Google Scholar 

  43. M.H. Yu and B. Bhushan, Contact analysis of three-dimensional rough surfaces under frictionless and frictional contact, Wear 200 (1996) 265–280.

    Article  CAS  Google Scholar 

  44. T. Merriman and J. Kannel, Analyses of the role of surface roughness on contact stresses between elastic cylinders with and without soft surface coating, ASME Journal of Tribology 111 (1989) 87–94.

    Google Scholar 

  45. S.J. Cole and R.S. Sayles, A numerical model for the contact of layered elastic bodies with real rough surfaces, ASME Journal of Tribology 114 (1992) 334–340.

    CAS  Google Scholar 

  46. J.T. Oden and J.A.C. Martins, Models and computational methods for dynamic friction phenomana, Computer Methods in Appl. Mech. and Eng. 52 (1985) 527–634.

    Article  Google Scholar 

  47. J.A.C. Martins, J.T. Oden and F.M.F. Simoes, A study of static and kinetic friction, Int. J. Engr. Sci. 28 (1990) 29–92.

    Article  Google Scholar 

  48. B.V. Derjaguin, N.V. Chuarev and V.M. Muller, Surfaces Forces (Consultants Bureau, New York, 1987).

    Google Scholar 

  49. A.W. Adamson, Physical Chemistry of Surfaces (Wiley, New York, 1990).

    Google Scholar 

  50. J.N. Israelachvili, Intermolecular and Surface Forces, 2nd Ed. (Academic Press, San Diego, CA, 1992).

    Google Scholar 

  51. B. Bhushan, Methodology for roughness measurement and contact analysis for optimization of interface roughness, IEEE Trans. Magn. 32 (1996) 1819–1825.

    Article  Google Scholar 

  52. Y. Li and F.E. Talke, A model for the effect of humidity on stiction of the head/disk interface, in: Tribology and Mechanics of Magnetic Storage Systems, ed. B. Bhushan (SP-29, STLE, Park Ridge, Ill, 1990) pp. 79–84.

    Google Scholar 

  53. H. Tian and T. Matsudaira, The role of relative humidity, surface roughness and liquid build-up on static friction behavior of the head/disk interface, ASME Journal of Tribology 115 (1993) 28–35.

    CAS  Google Scholar 

  54. C. Gao, X. Tian and B. Bhushan, A meniscus model for optimization of texturing and liquid lubrication of magnetic thin film rigid disks, Tribol. Trans. 38 (1995) 201–212.

    CAS  Google Scholar 

  55. B. Bhushan, C.A. Kotwal and S.K. Chilamakuri, Kinetic meniscus model for prediction of rest stiction, ASME Journal of Tribology 119 (1997) (in press).

  56. X. Tian and B. Bhushan, The micro-meniscus effect of a thin liquid film on the static friction of rough surface contact, J. Phys. D: Appl. Phys. 29 (1996) 163–178.

    Article  CAS  Google Scholar 

  57. B. Bhushan and S. Chilamakuri, Nongaussian surface roughness distribution of magnetic media for minimum friction/stiction, J. Appl. Phys. 79 (1996) 5794–5996.

    Article  CAS  Google Scholar 

  58. S.K. Chilamakuri and B. Bhushan, Contact analysis of nongaussian random surfaces, Proc. Instn. Mech. Engrs., Part J: J. Eng. Tribol. (1997) (in press).

  59. B. Bhushan, Contact mechanics of rough surfaces in tribology: single asperity contact, Appl. Mech. Rev. 49 (1996) 275–298.

    Google Scholar 

  60. G.M. Hamilton and L.E. Goodman, Stress field created by a circular sliding contact, ASME Journal of Applied Mechanics 33 (1966) 371–376.

    Google Scholar 

  61. T.C. O'Sullivan and R.B. King, Sliding contact stress field due to a spherical indenter on a layered elastic half-space, ASME Journal of Tribology 110 (1988) 235–240.

    Google Scholar 

  62. B. Lawn, Fracture of Brittle Solids (Cambridge Univ. Press, Cambridge, 1993).

    Google Scholar 

  63. E.R. Kral, K. Komvopoulos and D.B. Bogy, Elastic-plastic finite element analysis of repeated indentation of a half-space by a rigid sphere, ASME Journal of Applied Mechanics 60 (1993) 829–841.

    Article  Google Scholar 

  64. E.R. Kral, K. Komvopoulos and D.B. Bogy, Finite element analysis of repeated indentation of an elastic-plastic layered medium by a rigid sphere, Part I: surface results, ASME Journal of Applied Mechanics 62 (1995) 20–28.

    Article  Google Scholar 

  65. E.R. Kral, K. Komvopoulos and D.B. Bogy, Finite element analysis of repeated indentation of an elastic-plastic layered medium by a rigid sphere, Part II: subsurface results, ASME Journal of Applied Mechanics 62 (1995) 29–42.

    Article  Google Scholar 

  66. D. Tabor, The Hardness of Metals (Clarendon Press, Oxford, 1951).

    Google Scholar 

  67. K.L. Johnson, Contact Mechanics (Cambridge University Press, Cambridge, 1985).

    Google Scholar 

  68. B. Bhushan and X. Tian, Contact analysis of regular patterned rough surfaces in magnetic recording, ASME J. Electronic Packaging 117 (1995) 26–33.

    Google Scholar 

  69. J.B.P. Williamson, J. Pullen and R.T. Hunt, The shape of solid surfaces, Surface Mechanics (ASME, New York, 1970) p. 24.

    Google Scholar 

  70. J.A. Greenwood and J.H. Tripp, The contact of two nominally flat rough surfaces, Proc. Instn. Mech. Engrs. 185 (1970–71) 625–633.

    Google Scholar 

  71. M. O'Callaghan and M.A. Cameron, Static contact under load between nominally flat surfaces in which deformation is purely elastic, Wear 36 (1976) 76–97.

    Article  Google Scholar 

  72. I.N. Gibra, Probability and Statistical Inference for Scientists and Engineers (Prentice-Hall, Englewood Cliffs, NJ, 1973).

    Google Scholar 

  73. M. Abramowitz and I.A. Stegun, Handbook of Mathematical Functions (Dover, NY, 1965) pp. 685–720.

  74. P.R. Nayak, Random process model of rough surfaces, ASME J. Lub. Tech. 93 (1971) 398–407.

    Google Scholar 

  75. M.S. Longuet-Higgins, The statistical analysis of a random, moving surface, Phil. Trans. R. Soc. Lond. A 249 (1957) 321–387.

    Google Scholar 

  76. M.S. Longuet-Higgins, Statistical properties of an isotropic random surface, Phil. Mag. R. Soc. Lond. A 250 (1957) 157–174.

    Google Scholar 

  77. K.N.G. Fuller and D. Tabor, The effect of surface roughness on the adhesion of elastic solids, Proc. Roy. Soc. Lond. A 345 (1975) 327–342.

    Google Scholar 

  78. K.L. Johnson, K. Kendall and A.D. Roberts, Surface energy and the contact of elastic solids, Proc. Roy. Soc. Lond. A 324 (1971) 301–313.

    Article  CAS  Google Scholar 

  79. D.J. Whitehouse and M.J. Phillips, Discrete properties of random surfaces, Proc. Roy. Soc. Lond. A 290 (1978) 267–298.

    Google Scholar 

  80. C.Y. Poon and B. Bhushan, Surface roughness analysis of glass-ceramic substrates and finished magnetic disks, and Ni-P coated Al-Mg and glass substrates, Wear 190 (1995) 89–109.

    Article  CAS  Google Scholar 

  81. B. Bhushan and M.F. Doerner, Role of mechanical properties and surface texture in the real area of contact of magnetic rigid disks, ASME Journal of Tribology 111 (1989) 452–458.

    Article  Google Scholar 

  82. S.K. Chilamakuri and B. Bhushan, Optimization of asperities for laser-textured magnetic disk surfaces, Tribol. Trans. 40 (1997) 303–311.

    CAS  Google Scholar 

  83. J. Boussinesq, Application des Potentials a l'Etude de l'Equilibre et du Mouvement des Solides Elastiques (Gauthier-Villars, Paris, France (1885).

    Google Scholar 

  84. V. Cerruti, Roma Acc. Lincei, Mem. fis. mat. (1882).

  85. A.E.H. Love, The stress produced in a semi-infinite solid by pressure on part of the boundary, Proc. Roy. Soc. Lond. A 228 (1929) 377–420.

    Google Scholar 

  86. T.H. Richards, Energy Methods in Stress Analysis (Ellis Horwood, Chichester, 1977).

    Google Scholar 

  87. P. Wolfe, The simplex method for quadratic programming, Econometrica 27 (1959) 382–395.

    Article  Google Scholar 

  88. S.C. Lee and N. Ren, Behavior of elastic-plastic rough surface contacts as affected by surface topography, load and material hardness, Tribol. Trans. 39 (1996) 67–74.

    CAS  Google Scholar 

  89. S.C. Lee and N. Ren, The subsurface stress field created by three-dimensionally rough bodies in contact with traction, Tribol. Trans. 37 (1994) 615–621.

    Google Scholar 

  90. N. Ahmadi, L.M. Keer, T. Mura and V. Vithoontien, The interior stress field caused by tangential loading of a rectangular patch on an elastic half space, ASME Journal of Tribology 109 (1987) 627–629.

    Google Scholar 

  91. J.J. Kalker, Numerical calculation of the elatic field in a half-space, Communications in Appl. Numerical Method 2 (1986) 401–410.

    Article  Google Scholar 

  92. C.Y. Poon and R.S. Sayles, Contact analysis of a smooth ball on an anisotropic rough surface, ASME Journal of Tribology 116 (1994) 850–859.

    Google Scholar 

  93. N. Ren and S.C. Lee, The effects of surface roughness and topography on the contact behavior of elastic bodies, ASME Journal of Tribology 116 (1994) 804–810.

    Article  Google Scholar 

  94. C.Y. Poon and B. Bhushan, Rough surface contact analysis and its relation to plastic deformation at the head disk interface, J. Appl. Phys. 79 (1996) 5799–5801.

    Article  CAS  Google Scholar 

  95. C.Y. Poon and B. Bhushan, Nano-asperity contact analysis and surface optimization for magnetic head slider/disk contact, Wear 202 (1996) 83–98.

    Article  CAS  Google Scholar 

  96. Y.Z. Hu and K. Tonder, Simulation of 3-D random surface by 2-D digital filter and Fourier analysis, Int. J. of Mach. Tool Manufact. 32 (1992) 82–90.

    Google Scholar 

  97. C.Y. Poon and B. Bhushan, Numerical contact and stiction analyses of gaussian isotropic surfaces for magnetic head slider/disk contact, Wear 202 (1996) 68–82.

    Article  CAS  Google Scholar 

  98. D.P. Hess and A. Soom, Normal and angular motions at a rough planar contact during sliding with friction, ASME Journal of Tribology 114 (1992) 567–578.

    Google Scholar 

  99. A.A. Polycarpou and A. Soom, A two-dimensional mixed friction model for a lubricated line contact, ASME Journal of Tribology 118 (1996) 183–189.

    Google Scholar 

  100. N. Kikuchi and J.T. Oden, Contact Problems in Elasticity (SIAM, Philadelphia, 1985).

    Google Scholar 

  101. P. Rabier, J.A.C. Martins and J.T. Oden, Existence and local uniqueness of solutions to contact problems in elasticity with nonlinear friction laws, Int. J. Engng. Sci. 24 (1986) 1755–1768.

    Article  Google Scholar 

  102. B. Bhushan and Z. Zhao, Friction/stiction and wear studies of magnetic thin-film disks with two perfluoropolyether lubricants, IEEE Trans. Magn. 31 (1997) 918–925.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Computer Microtribology and Contamination Laboratory, Department of Mechanical Engineering, The Ohio State University, Columbus, OH, 43210-1107, USA

    Bharat Bhushan

Authors
  1. Bharat Bhushan
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Bhushan, B. Contact mechanics of rough surfaces in tribology: multiple asperity contact. Tribology Letters 4, 1–35 (1998). https://doi.org/10.1023/A:1019186601445

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/A:1019186601445

Search

Navigation