Abstract
Polymer blends of modified polyphenylene oxide (PPO) and thermotropic polyester were prepared by extrusion followed by drawing. The morphology and mechanical properties of the blends were examined by scanning electron microscopy, static tensile tests and dynamic mechanical analysis. The static mechanical tests showed that the liquid-crystalline polymers (LCP) additions led to an increase in both modulus and tensile strength of the blends, while elongation at break was generally decreased. The magnitude of the reinforcing effect depended significantly on the LCP content, but also on draw ratio. The Tsai-Halpin equation was used to estimate the aspect ratio of LCP microfibrils. The storage modulus showed that the LCP phase tended to reinforce the PPO matrix over a wide range of temperature but not near the glass transition zone.
Similar content being viewed by others
References
A. KOHLI, N. CHUNG and R. A. WEISS, Polym. Eng. Sci. 29 (1989) 573.
Y. IDE and Z. OPHIR, Polym. Eng. Sci. 23 (1983) 261.
D. E. TUREK and G. P. SIMON, Polymer 34 (1993) 2750.
C. CREVECOEUR and G. GROENINCKX, Polym. Eng. Sci. 30 (1990) 532.
K. G. BLIZARD, C. FEDERICI, O. FEDERICO and L. CHAPOY, ibid. 30 (1990) 1442.
A.M. SUKHADIA, A. DATTA and D.G. BAIRD, Int. Polym. Process 3 (1992) 218.
Y. QIN, D. L. BRYDON, R. R. MATHER and R. H. WARDMAN, Polymer 34 (1993) 1202.
Q. LIN, J. JHO and A.F. YEE, Polym. Eng. Sci. 33 (1993) 789.
G. I. TAYLOR, Proc. R. Soc. A146 (1934) 501.
K. MIN, J. L. WHITE and J. F. FELLERS, Polym. Eng. Sci. 24 (1984) 1327.
S. K. BHATTARCHARYA and A. MISRA, ibid. 30 (1990) 124.
A. K. MITHAL, A. TAYEBI and C.H. LIN, ibid. 31 (1991) 1533.
A. MEHTA and A. I. ISAYEV, ibid. 31 (1991) 971.
N. CHAPLEAU, P. J. CARREAU, C. PELETEIRO, P. A. LAVOIE and T.M. MALIK ibid. 32 (1992) 1876.
S. LI, C. DICKINSON and J. C. W. CHIEN, J. Appl. Polym. Sci. 43 (1991) 1111.
A. F. YEE, Polym. Eng. Sci. 17 (1977) 213.
J. STOELTING, F. E. KARASZ and W. J. MacKNIGHT, ibid. 10 (1970) 133.
P. S. TUCKER, J. W. BARLOW and D. R. PAUL, Macromolecules 21 (1988) 1678.
A. R. SHULTZ and B. M. BEACH, ibid. 7 (1974) 902.
T. LIMTASIRI and A. I. ISAYEV, J. Appl. Polym. Sci. 42 (1991) 2923.
D. E. TUREK, G. P. SIMON, C. TIU, O. T. SIANG and E. KOSIOR, Polymer 33 (1992) 4322.
B. Y. SHIN, S. H. JANG, I. J. CHUNG and B. S. KIM, Polym. Eng. Sci. 32 (1992) 73.
S. LEE, S. M. HONG, Y. SEO, T. S. PARK, S. S. HWANG, K. U. KIM and J. W. LEE, Polymer 35 (1994) 519.
J. C. HALPIN and J. L. KARDOS, Polym. Eng. Sci. 16 (1976) 344.
L. E. NIELSON, J. Appl. Polym Sci. 14 (1970) 4626.
J. SARLIN and P. TORMALA, ibid. 40 (1990) 453.
O. LIN and A. F. YEE, Polym. Eng. Sci. 35 (1994) 3463.
B. TEKKANAT and R. GIBALA, J. Thermoplastic Compos. Mater. 4(1991) 190.
D. J. BLUNDELL and K. A. BUCKINGHAM, Polymer 26 (1985) 1623.
R. K. Y. LI, S. LU, C. L. CHOY and C. McCALL, in "Advanced Composites '93", edited by T. Chandra and A. K. Dhingra (The Minerals, Metals and Materials Society, Warrendale, PA 1993) pp. 855–60.
M. J. TROUGHTON, G. R. DAVIES and I. M. WARD, Polymer 30 (1989) 58.
S. K. SHARMA, A. TENDOLKAR and A. MISSA, Molec. Cryst. Liq. Cryst. 157 (1988) 597.
K. G. BLIZARD and R. R. HAGHIGHAT, Polym. Eng. Sci. 33 (1993) 799.
S. C. TJONG, S. L. LIU and R. K. Y. LI, J. Mater. Sci. 30 (1995) 353.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
TJONG, S.C., LIU, S.L. & LI, R.K.Y. Mechanical performance of the extruded blends of liquid-crystalline copolyester and modified polyphenylene oxide. Journal of Materials Science 32, 2163–2170 (1997). https://doi.org/10.1023/A:1018543310086
Published:
Issue Date:
DOI: https://doi.org/10.1023/A:1018543310086