Abstract
A model is described of directional coupled two-phase composite growth in three dimensions using a combined cellular automaton finite difference (CAFD) approach. The modelling strategy and some preliminary results are presented here for the first time. The model incorporates solute diffusion and a simple cellular automaton growth rule containing a pseudo-curvature algorithm. Despite its limitations, the model is able to simulate some of the structural effects that take place during coupled growth. As a demonstration application the model is applied to eutectic growth in the Pb–Sn system and compared to experimental measurements. The scale of predicted microstructures in the model is close to that measured after directional freezing of Pb–Sn eutectic.
Similar content being viewed by others
References
J. P. Chilton and W. C. Winegard, J. Inst. Metals 89 (1961) 162.
J. D. Hunt and J. P. Chilton, ibid. 92 (1963) 21.
A. Moore and R. Elliot, in “The solidification of metals” (The Iron and Steel Institute, London, 1968).
F. R. Mollard and M. C. Flemings, Trans. Metall. Soc. AIME 239 (1967) 1526.
Idem., ibid. 239 (1967) 1534.
M. Hillert, Jernkontorets Ann. 141 (1957) 757.
W. A. Tiller, in “Liquid metals and solidification” (American Society of Metals, Metals Park, Ohio, 1958).
K. A. Jackson and J. D. Hunt, Trans. Metall. Soc. AIME 236 (1966) 1129.
S. G. R. Brown and J. A. Spittle, in “Modelling of casting, welding and advanced solidification processes” V, edited by M. Rappaz, M. R. Ozgu and K.W. Mahin (TMS, Warrendale PA, 1990) p. 395.
M. Rappaz and CH-A. Gandin, Acta Metall. Mater. 41 (1993) 345.
CH-A. Gandin and M. Rappaz, ibid. 42 (1994) 2233.
CH. Charbon, A. Jacot and M. Rappaz, ibid. 42 (1994) 3953.
M. Rappaz, CH. Charbon and R. Sasikumar, ibid. 42 (1994) 2365.
CH. Charbon and R. Lesar, Modelling Simul. Mater. Sci. Eng. 5 (1997) 53.
A. Karma, Phys. Rev. Lett. 59 (1987) 71.
J. R. Xiao, J. Iwan, D. Alexander and F. Rosenberger, Phys. Rev. A 45 (1992) 571.
J. A. Spittle and S. G. R. Brown, Acta Metall. Mater. 42 (1994) 1811.
S. G. R. Brown and N. B. Bruce, J. Mater. Sci. 30 (1995) 1144.
I. Steinbach, F. Pezolla, M. Seesselberg, R. Prieler, G. J. Schmitz and J. L. L. Rezende, Physica D 94 (1996) 135.
M. Seesselberg, J. Tiaden, G. J. schmitz and I. Steinbach, in Proceedings of the 4th Decennial Int. Conf. On Solidification Processing, edited by J. Beech and H. Jones (SRP Ltd., Exeter, UK, 1997) p. 440.
S. G. R. Brown and J. A. Spittle, in “Modelling of casting, welding and advanced solidification processes” VII, edited by M. Cross and J. Campbell (TMS, Warrendale PA 1995) p. 541.
J. A. Spittle and S. G. R. Brown, in Proceedings of the 9th International Conference on Numerical Methods in Thermal Problems, edited by R. W. Lewis (Pineridge Press, Swansea 1995) p. 533.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Brown, S.G.R. Simulation of diffusional composite growth using the cellular automaton finite difference (CAFD) method. Journal of Materials Science 33, 4769–4773 (1998). https://doi.org/10.1023/A:1004405607979
Issue Date:
DOI: https://doi.org/10.1023/A:1004405607979