Coke formation and minimisation during steam reforming reactions
Abstract
The formation of coke during the steam reforming of light hydrocarbons results mainly from catalytic reactions. It is believed that the process is endemic to steam reforming in that the same intermediates are involved in the main reaction as are involved in coking. As a result, control of coking depends on the control of the kinetics of intermediate reactions. On an industrial scale, coking can be controlled by controlling steam/carbon ratios in the feed. It can also be minimised by ensemble size control on nickel surfaces and/or by interfering with the reactions leading to carbon. Doping with traces of sulphur or with small amounts of metals that concentrate on the nickel surface is found to reduce significantly the formation of coke. Further improvements may be possible as a result of detailed studies of support effects in the catalysis.
References (32)
- J.R. Rostrup-Nielsen
Natural gas conversion II
- J.R. Rostrup-Nielsen et al.
J. Catal.
(1977) - D.L. Trimm
Chem. Eng. Process.
(1984) - J.G McCarty et al.
J. Catal.
(1979) - C.A. Bernardo et al.
Carbon
(1979) - J.R. Rostrup-Nielsen
J. Catal.
(1974) - J.R. Rostrup-Nielsen
J. Catal.
(1984) - M. Kiskinova et al.
Surface Sci.
(1981) - J.P. Coad et al.
Surface Sci.
(1971) - C.A. Bernardo et al.
J. Catal.
(1985)
Appl. Catal.
J. Catal.
Steam Reforming Catalyst
Gas Making and Natural Gas
Catal. Rev. Sci. Eng.
Cited by (566)
Ni-based bimetallic catalysts for hydrogen production via (sorption-enhanced) steam methane reforming
2024, Chemical Engineering JournalThe catalytic performance of a monometallic Ni/Al2O3 and three bimetallic catalysts (Ni3M1/Al2O3, with M = Cu, Fe, and Ge) for the (sorption-enhanced) steam methane reforming reaction was evaluated. Ni3Cu1/Al2O3 was found to be the optimal catalyst in terms of methane conversion, hydrogen yield, and purity. Ge also has a promoting effect on the monometallic Ni catalyst, whereas the addition of Fe negatively influenced its performance. Physico-chemical characterization of the materials indicated the formation of alloys upon activation of the materials with hydrogen. The addition of Cu increased the surface area and metal dispersion, and improved the overall morphology of the catalyst. The experimental observations were also supported by a numerical study combining Density Functional Theory-based calculations and Microkinetic modelling of the SMR process. Ni3Cu1 and Ni3Ge1 were calculated to have a similar level of catalytic activity as Ni, whereas Ni3Fe1 was unsuitable for the reaction. The SMR reaction was further improved by adding calcium oxide as the CO2 sorbent, which increased methane conversion, CO selectivity, hydrogen yield, and hydrogen purity. The highest methane conversion of 97 % was achieved by Ni/Al2O3 and Ni3Cu1/Al2O3 at 700 °C.
Currently most of the hydrogen produced worldwide is obtained by reforming fossil fuels. The advancement and use of carbon capture and sequestration technologies ensure the CO2 formed during reforming can be easily captured and stored. There are two primary methods for hydrogen production, methane reforming and naphtha reforming. The present work is aimed to provide the state-of art for both technologies in addition to shedding light on the reforming of some other fuels. Methane reforming while being a very mature technology, still has its challenges when it comes to the choice of catalyst. Over the past decade methane reforming using solar energy has gained prominence. While some solar technologies such as parabolic trough collector with brine solution can be easily adapted for hydrogen reforming, challenges to ensure proper heat flux distribution remain. Novel designs of collectors have also been developed and are under study. Modelling of naphtha reforming is challenging as naphtha is a mixture of several thousands of components, it is often practically impossible to determine its accurate composition. There are several reaction kinetics that have been developed for naphtha reforming. Furthermore, it is essential to model the catalyst deactivation when modelling naphtha reformer. Optimization of the naphtha reformer and the plant is essential to ensure low-cost, high productivity yield.
This study investigated the steam reforming of microalgae oil in the existence of Ni/CeO2-ZrO2 catalyst to assess its potential for hydrogen production. For this purpose, the catalyst was synthesized by the impregnation-co-precipitation method and characterized using various techniques. Catalytic microalgae steam reforming was performed in a continuous flow quartz fixed bed reactor and the effects of reaction temperature, weight hourly space velocity, and steam to microalgae volume ratio on conversion and hydrogen selectivity were evaluated. The findings revealed that microalgae oil, especially with a high oleic acid content, showed promise as a feedstock for hydrogen production via steam reforming. Suitable conditions were identified as a reaction temperature of 850 °C, weight hourly space velocity of 29 h−1, and steam to microalgae oil volume ratio of 12:1, resulting in 99.79 % hydrogen selectivity and 100 % microalgae oil conversion. Furthermore, a characterization of the spent catalyst was conducted, and a coke deposition of 19.17 mgcarbon/gcat.h was observed following 15 h of reaction.
Recent advances in the catalysis of steam reforming of methane (SRM)
2024, International Journal of Hydrogen EnergySteam reforming of methane (SRM) is a necessary industrial process for converting methane (a greenhouse gas) to synthesis gas. The process requires a catalyst to achieve good conversion. Catalyst design for steam reforming has been ongoing for a long time, but exciting solutions have been recently proffered to many of the challenges related to catalyst deactivation. The review examines the recent literature on SRM and elucidates breakthroughs in catalyst design with a focus on the past half-decade. Noble metal catalyst has gained increasing interest above conventional Ni due to their superior deactivation suppression, but the cost challenges remain for the former. For these noble metals, it is important to explore supports besides γ-Al2O3 that are more reducible, as this has been shown to induce strong covalent metal-support interaction that is not associated with surface defects. In transitioning from laboratory research to industrial use, we expect new-generation catalysts to show good performance under relevant conditions (not often tested), such as resistance to sulfur poisoning and good heat transfer. In analyzing the literature and discussing recent progress, we made some observations and provided future outlook and insight into areas that may benefit researchers in the field.
Effect of noble gases on the transport and thermodynamic characteristics of microchannel reforming reactors for hydrogen production
2024, International Journal of Hydrogen EnergyNoble gases can offer the advantages of high selectivity in steam reforming processes with especially great potential for hydrogen production, but the underlying cause for process intensification has not yet been identified. Calculations are performed to investigate the effect of helium or argon gases on the transport and thermodynamic characteristics of a microchannel reactor for hydrogen production. Dimensionless Nusselt and Sherwood number analyses are carried out and the thermodynamic properties of the reaction mixture are determined in order to effectively control the heat and mass transport processes with increasing precision. The heat and reaction phenomena in the reactor system are studied in order to understand the underlying cause for the improvements in transport performance. Enthalpy analysis is performed and the evolution of energy in the chemical processes is discussed based upon reaction heat flux. The results indicate that the noble gas offers the advantages of process intensification due to enhanced heat and mass transport. Additionally, the noble gas can be utilized to enhance conversion behavior while maintaining the reaction rate. Furthermore, the transport properties can be effectively controlled and manipulated, thereby serving as a means for improving the effectiveness of convection at the catalyst surface. Additional advantages include the ability to avoid the problem inherent in thermal management, thereby providing nearly isothermal operation and thus suppressing undesirable side reactions. Finally, the reforming process is characterized for purposes of demonstration or explanation by thermodynamic parameters, including temperature, specific heat, specific enthalpy, sensible enthalpy, and mean molecular weight.
Electrified steam methane reforming microreactor
2024, International Journal of Hydrogen EnergyA promising way to rapidly and economically cut back CO2 emissions of steam methane reforming is the electrification of the gas-fired methane reforming process. However, there is a challenge to effectively bringing the required heat to the process, typically a hot stream gas, from an electrical source. This paper presents the architecture of a novel microreactor integrated into an electrically heated setup to perform methane reforming. Experimental assessment is presented, beginning with the syngas composition during dry, mix and ensuing steam methane reforming at 900 °C ± 2 °C, 71,000 h−1 GHSV, and steam to carbon ratio (S/C) of 2. It showed H2/CO ratios close to the calculated equilibriums and fast transient behaviours allowing reduced start-up and cool-down time for industrial applications compared to traditional reformers. The performance of the reactor was then investigated for a range of temperatures, mass flow, pressure, and steam-to-methane ratio. The experiments revealed a CH4 conversion varying between 82% and 98% following anticipated trends. The reactor was operated continuously for 170 h at 900 °C, S/C of 2, and 71,000 h−1 GHSV with limited degradation in its performance, mainly caused by carbon deposit on the catalyst. Finally, a cumulative of 400 h of test on the microreactor has demonstrated no apparent structural degradation or abnormal channel obstruction.
- ∗
Tel.:(61-2) 697-4340; Fax: (61-2) 313-7191.