Paper
Automated three-dimensional finite element modelling of bone: a new method

https://doi.org/10.1016/0141-5425(90)90022-FGet rights and content

Abstract

Three-dimensional finite element stress analysis of bone is a key to understanding bone remodelling, assessing fracture risk, and designing prostheses; however, the cost and complexity of predicting the stress field in bone with accuracy has precluded the routine use of this method. A new, automated method of generating patient-specific three-dimensional finite element models of bone is presented — it uses digital computed tomographic (CT) scan data to derive the geometry of the bone and to estimate its inhomogeneous material properties. Cubic elements of a user-specified size are automatically defined and then individually assigned the CT scan-derived material properties. The method is demonstrated by predicting the stress, strain, and strain energy in a human proximal femur in vivo. Three-dimensional loading conditions corresponding to the stance phase of gait were taken from the literature and applied to the model. Maximum principal compressive stresses of 8–23 MPa were computed for the medial femoral neck. Automated generation of additional finite element models with larger numbers of elements was used to verify convergence in strain energy.

References (31)

  • R Scholten et al.

    Analysis of stress distribution in natural and artificial hip joints using the finite-element method

    S Afr Mech Eng

    (1978)
  • R Huiskes et al.

    Stresses in the femoral head-neck region after surface replacement. A three-dimensional finite element analysis

    Trans Orthop Res Soc

    (1981)
  • JC Lotz et al.

    The structural contribution of cortical and trabecular bone in the femoral neck

    Trans Orthop Res Soc

    (1988)
  • A Rohlmann et al.

    The relevance of stress computation in the femur with and without endoprostheses

  • AM Weinstein et al.

    Finite element analysis of a composite material hip stem

  • Cited by (360)

    • Implantable 3D printed devices—technologies and applications

      2023, Handbook of Surgical Planning and 3D Printing: Applications, Integration, and New Directions
    View all citing articles on Scopus
    View full text