Skip to main content
SpringerLink
Log in

Evaluation of Interfacial and Mechanical Properties of Glass Fiber/Poly-Dicyclopentadiene Composites with Different Post Curing at Ambient and Low Temperatures

  • Published:
Fibers and Polymers Aims and scope Submit manuscript

Abstract

Recently new poly-dicyclopentadiene (p-DCPD) has increasing been used for composites in military, aerospace, and transportation applications due to its favorable impact properties. In this work, the cross-linking density of p-DCPD with different post curing conditions was indirectly measured by thermal analysis using differential scanning calorimetry (DSC), weight variation accompanying swelling and density. The effects of the post curing conditions on mechanical properties of p-DCPD and glass fiber (GF)/p-DCPD were determined via tensile, Izod impact, and flexural tests at ambient and low temperatures (-20 °C). Interfacial properties were evaluated by fragmentation and cyclic loading tests. The work of adhesion was determined via Static contact angle using four solvents measurements, to provide the information on the differences in the interfacial properties between GF and p-DCPD. The change of cross-linking density by post curing of p-DCPD affected the mechanical and interfacial properties of GF/p-DCPD composites.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. T. A. Davidson, K. B. Wagener, and D. B. Priddy, Macromolecules, 29, 786 (1996).

    Article  CAS  Google Scholar 

  2. D. J. Kwon, P. S. Shin, J. H. Kim, H. S. Park, Y. M. Beak, K. L. DeVries, and J. M. Park, Compos. Pt. B-Eng., 123, 74 (2017).

    Article  CAS  Google Scholar 

  3. D. Yang, W. Huang, J. Yu, J. Jiang, L. Zhang, and M. Xie, Polymer, 51, 5100 (2010).

    Article  CAS  Google Scholar 

  4. B. Pan, J. Zhao, Y. Zhang, and Y. Zhang, IERI Procedia, 1, 19 (2012).

    Article  Google Scholar 

  5. H. A. Colorado, W. Yuan, Z. Guo, J. Juanri, and J. M. Yang, J. Compos. Mater., 48, 2023 (2014).

    Article  Google Scholar 

  6. W. Jeong and M. R. Kessler, Chem. Mater., 20, 7060 (2008).

    Article  CAS  Google Scholar 

  7. T. A. Davidson and K. B. Wagener, J. Mol. Catal. A: Chem., 133, 67 (1998).

    Article  CAS  Google Scholar 

  8. L. Guadagno, P. Longo, M. Raimondo, C. Naddeo, A. Mariconda, V. Vittoria, G. Iannuzzo, and S. Russo, Compos. Pt. B-Eng., 42, 296 (2011).

    Article  CAS  Google Scholar 

  9. R. H. Grubbs and W. Tumas, Science, 243, 907 (1989).

    Article  CAS  PubMed  Google Scholar 

  10. S. Sutthasupa, M. Shiotsuki, and F. Sanda, Polym. J., 42, 905 (2010).

    Article  CAS  Google Scholar 

  11. C. W. Bielawski and R. H. Grubbs, Prog. Polym. Sci., 32, 1 (2007).

    Article  CAS  Google Scholar 

  12. Y. P. Yampol’skii, N. B. Bespalova, and E. Sh. Finkel’shtein, Macromolecules, 27, 2872 (1994).

    Article  Google Scholar 

  13. A. Leitgeb, J. Wappel, and C. Slugovc, Polymer, 51, 2927 (2010).

    Article  CAS  Google Scholar 

  14. Y. Jia, A. M. Spring, F. Yu, K. Yamamoto, I. Aoki, A. Otomo, and S. Yokoyama, Thin Solid Films, 554, 175 (2014).

    Article  CAS  Google Scholar 

  15. Q. Ye, X. Wang, S. Li, and F. Zhou, Macromolecules, 43, 5554 (2010).

    Article  CAS  Google Scholar 

  16. J. H. Kim, J. S. Han, T. S. Kwon, Y. K. Park, and J. K. Jeon, Catalysis Today, 232, 69 (2014).

    Article  CAS  Google Scholar 

  17. Q. Sun, S. Ma, Z. Ge, and Y. Luo, High Performance Polymers, 29, 931 (2016).

    Article  CAS  Google Scholar 

  18. J. K. Lee, S. J. Hong, and X. Liu, Macromol. Res., 12, 478 (2004).

    Article  CAS  Google Scholar 

  19. D. A. Rusakov, A. A. Lyapkov, E. I. Korotkova, N. V. Thanha, T. Q. Cuong, and M. K. Zamanova, Procedia Chemistry, 10, 490 (2014).

    Article  CAS  Google Scholar 

  20. M. S. Madhukar and L. T. Drzal, J. Compos. Mater., 26, 936 (1992).

    Article  CAS  Google Scholar 

  21. H. Cui and M. R. Kessler, Compos. Sci. Technol., 72, 1264 (2012).

    Article  CAS  Google Scholar 

  22. C. Li, Y. Li, X. She, J. Vongsvivut, J. Li, F. She, W. Gao, and L. Kong, Compos. Sci. Technol., 118, 1 (2015).

    Article  CAS  Google Scholar 

  23. R. Ding, Y. Xia, T. C. Mauldin, and M. R. Kessler, Polymer, 55, 5718 (2014).

    Article  CAS  Google Scholar 

  24. X. Sheng, J. K. Lee, and M. R. Kessle, Polymer, 50, 1264 (2009).

    Article  CAS  Google Scholar 

  25. J. M. Park, J. W. Kong, J. W. Kim, and D. J. Yoon, Compos. Sci. Technol., 64, 983 (2004).

    Article  CAS  Google Scholar 

  26. J. M. Park, S. I. Lee, O. Y. Kwon, H. S. Choi, and J. H. Lee, Compos. Pt. A-Appl. Sci. Manuf., 34, 203 (2003).

    Article  CAS  Google Scholar 

  27. J. M. Park, S. I. Lee, and J. H. Choi, Compos. Sci. Technol., 65, 571 (2005).

    Article  CAS  Google Scholar 

  28. Z. J. Wang, D. J. Kwon, K. L. DeVries, and J. M. Park, Exp. Therm. Fluid Sci., 60, 132 (2015).

    Article  CAS  Google Scholar 

  29. J. M. Park, Z. J. Wang, D. J. Kwon, G. Y. Gu, W. I. Lee, J. K. Park, and K. L. DeVries, Compos. Pt. B-Eng., 43, 1171 (2012).

    Article  CAS  Google Scholar 

  30. D. Y. Kwok, Colloid Surf. A-Physicochem. Eng. Asp., 156, 191 (1999).

    Article  CAS  Google Scholar 

  31. Z. Hossain, B. Bairgi, and M. Belshe, Construction and Building Materials, 95, 45 (2015).

    Article  Google Scholar 

  32. P. S. Shin, D. J. Kwon, J. H. Kim, S. I. Lee, K. L. DeVries, and J. M. Park, Compos. Sci. Technol., 142, 98 (2017).

    Article  CAS  Google Scholar 

  33. D. K. Owen and R. C. Wendth, J. Appl. Polym. Sci., 13, 1741 (1969).

    Article  Google Scholar 

  34. T. Okabe and N. Takeda, Compos. Sci. Technol., 61, 1789 (2001).

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Materials Engineering and Convergence Technology, Research Institute for Green Energy Convergence Technology, Gyeongsang National University, Jinju, 52828, Korea

    Ha-Seung Park, Pyeong-Su Shin, Jong-Hyun Kim, Yeong-Min Baek, Dong-Jun Kwon & Joung-Man Park

  2. Department of Mechanical and Aerospace Engineering, Seoul National University, Seoul, 08826, Korea

    Woo-Il Lee

  3. Department of Mechanical Engineering, The University of Utah, Salt Lake City, Utah, 84112, USA

    K. Lawrence DeVries & Joung-Man Park

Authors
  1. Ha-Seung Park
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Pyeong-Su Shin
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jong-Hyun Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Yeong-Min Baek
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Dong-Jun Kwon
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Woo-Il Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. K. Lawrence DeVries
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Joung-Man Park
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Joung-Man Park.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Park, HS., Shin, PS., Kim, JH. et al. Evaluation of Interfacial and Mechanical Properties of Glass Fiber/Poly-Dicyclopentadiene Composites with Different Post Curing at Ambient and Low Temperatures. Fibers Polym 19, 1989–1996 (2018). https://doi.org/10.1007/s12221-018-8491-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12221-018-8491-6

Keywords

Search

Navigation