Abstract
A liquid crystalline epoxy (LCE) grafted AlN particles (LCE-g-AlN) were fabricated and then incorporated these into epoxy matrix to obtain the composites. The structure of LCE-g-AlN was characterized by Fourier-transform infrared (FT-IR), nuclear magnetic resonance (NMR), thermal gravimetric analyses (TGA), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). The morphology and thermal properties of composites were systematically investigated. The morphology of the epoxy/LCE-g-AlN composites performed by scanning electron microscopy (SEM) indicated a homogeneous distribution of the LCE-g-AlN particles in epoxy. Moreover, the glass transition temperature (Tg), thermal stability, thermal conductivity and dynamic mechanical properties of composites showed a significant improvement due to the good miscibility and improvement of the interfacial interaction between LCE-g-AlN particles and epoxy matrix.
Similar content being viewed by others
References
W. Lin, K. S. Moon, and C. Wong, Adv. Mater., 21, 2421 (2009).
Y. Mamunya, A. Boudenne, N. Lebovka, L. Ibos, Y. Candau, and M. Lisunova, Compos. Sci. Technol., 68, 1981 (2008).
A. Yu, P. Ramesh, M. E. Itkis, E. Bekyarova, and R. C. Haddon, J. Phys. Chem. C, 111, 7565 (2007).
J. H. Yu, P. K. Jiang, C. Wu, L. C. Wang, and X. F. Wu, Polym. Compos., 32, 1483 (2011).
D. M. Bigg, Polym. Compos., 7, 125 (1986).
M. E. Bluhm, M. G. Bradley, R. Butterick, U. Kusari, and L. G. Sneddon, J. Am. Chem. Soc., 128, 7748 (2006).
A. M. Atta, R. Mansour, M. I. Abdou, and A. M. El-Sayed, J. Polym. Res., 12, 127 (2005).
S. Rimdusit and H. Ishida, Polymer, 41, 7941 (2000).
S. Zhao, L. S. Schadler, R. Duncan, H. Hillborg, and T. Auletta, Compos. Sci. Technol., 68, 2965 (2008).
Z. Han and A. Fina, Prog. Polym. Sci., 36, 914 (2011).
J. Yu, J. Duan, W. Peng, L. Wang, P. Peng, and P. Jiang, Express Polym. Lett., 5, 132 (2011).
F. Yang, X. Zhao, and P. Xiao, J. Eur. Ceram. Soc., 30, 3111 (2010).
L. C. Sim, S. R. Ramanan, H. Ismail, K. N. Seetharamu, and T. J. Goh, Thermochim. Acta, 430, 155 (2005).
R. F. Hill and P. H. Supancic, J. Am. Ceram. Soc., 85, 851 (2002).
T. Giang, J. Park, I. Cho, Y. Ko, and J. Kim, Polym. Compos., 34, 468 (2013).
N. Chisholm, H. Mahfuz, V. K. Rangari, A. Ashfaq, and S. Jeelani, Compos. Struct., 67, 115 (2005).
T. Zhou, X. Wang, X. Liu, and D. Xiong, Carbon, 48, 1171 (2010).
K. Yang and M. Gu, Compos. Part A-Appl. S., 41, 215 (2010).
T. L. Li and S. L. C. Hsu, J. Phys. Chem. B, 114, 6825 (2010).
S. Choi, H. Im, and J. Kim, Compos. Part A-Appl. S., 43, 1860 (2012).
X. Zhang and C. P. Grigoropoulos, Rev. Sci. Instrum., 66, 1115 (1995).
M. Choudhury, S. Mohanty, and S. K. Nayak, Polym. Compos., 34, 1 (2013).
L. H. Sinh, J. M. Hong, B. T. Son, N. N. Trung, and J. Y. Bae, Polym. Compos., 33, 2140 (2012).
J. H. Yu, R. Qian, and P. K. Jiang, Fiber. Polym., 14, 1317 (2013).
Z. Shi, M. Radwan, S. Kirihara, Y. Miyamoto, and Z. Jin, Appl. Phys. Lett., 95, 224104 (2009).
J. W. Bae, W. Kim, S. H. Cho, and S. H. Lee, J. Mater. Sci., 35, 5907 (2000).
Y. Xu, D. Chung, and C. Mroz, Compos. Part A-Appl. S., 32, 1749 (2001).
S. H. Xie, B. K. Zhu, J. B. Li, X. Z. Wei, and Z. K. Xu, Polym. Test., 23, 797 (2004).
A. Karul, K. T. Tan, C. C. White, D. L. Hunston, S. T. Marshall, B. Akgun, S. K. Satija, C. L. Soles, and B. D. Vogt, Polymer, 50, 3234 (2009).
A. Korzhenko, M. Tabellout, and J. Emery, Polymer, 40, 7187 (1999).
Y. Lei, Z. Tang, L. Zhu, B. Guo, and D. Jia, Polymer, 52, 1337 (2011).
W. Peng, X. Huang, J. Yu, P. Jiang, and W. Liu, Compos. Part A-Appl. S., 41, 1201 (2010).
M. Ciszewska and J. Plocharski, Int. J. Modern Phys. B, 19, 1135 (2005).
B. C. Lippens and J. De Boer, J. Catal., 4, 319 (1965).
Y. Lan, X. Chen, Y. Cao, Y. Xu, L. Xun, T. Xu, and J. Liang, J. Cryst. Growth, 207, 247 (1999).
X. W. Yang, S. R. Lu, Y. M. Jiang, B. Zhang and J. H. Yu, Iran. Polym. J., 17, 251 (2008).
Y. Ji, Y. Y. Huang, and E. M. Terentjev, Langmuir, 27, 13254 (2011).
W. Cantwell and A. Roulin-Moloney, “Fractography and Failure Mechanisms of Polymers and Composites”, pp.233–290, Elsevier Science Publishers Ltd., 1989.
R. Qian, J. Yu, L. Xie, Y. Li, and P. Jiang, Polym. Adv. Technol., 24, 348 (2013).
B. Qi, Z. Yuan, S. Lu, K. Liu, S. Li, L. Yang, and J. Yu, Fiber. Polym., 15, 326 (2014).
J. Yu, X. Huang, C. Wu, X. Wu, G. Wang, and P. Jiang, Polymer, 53, 471 (2012).
S. Y. Yang, C. C. M. Ma, C. C. Teng, Y. W. Huang, S. H. Liao, Y. L. Huang, H. W. Tien, T. M. Lee, and K. C. Chiou, Carbon, 48, 592 (2010).
M. J. Huang and T. Y. Kang, Int. J. Therm. Sci., 50, 1156 (2011).
E. T. Swartz and R. O. Pohl, Rev. Modern Phys., 61, 605 (1989).
X. Zhao, Y. Wu, Z. Fan, and F. Li, J. Appl. Phys., 95, 8110 (2004).
P. Zhang, Q. Li, and Y. Xuan, Compos. Part A-Appl. S., 57, 1 (2014).
W. D. Hergeth, U. J. Steinau, H. J. Bittrich, G. Simon, and K. Schmutzler, Polymer, 30, 254 (1989).
B. M. Tareev and A. Troickij, “Physics of Dielectric Materials”, Mir Publishers, 1979.
N. Tagami, M. Hyuga, Y. Ohki, T. Tanaka, T. Imai, M. Harada, and M. Ochi, IEEE on Trans. Dielectr. Electr. Insul., 17, 214 (2010).
S. White, P. Mather, and M. Smith, Polym. Eng. Sci., 42, 51 (2002).
J. Yu, X. Huang, L. Wang, P. Peng, C. Wu, X. Wu, and P. Jiang, Polym. Chem., 2, 1380 (2011).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Yuan, Z., Yu, J., He, Z. et al. Improved thermal properties of epoxy composites filled with thermotropic liquid crystalline epoxy grafted aluminum nitride. Fibers Polym 15, 2581–2590 (2014). https://doi.org/10.1007/s12221-014-2581-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-014-2581-x