Abstract
In the present paper, different types of pure and commercial plastic waste from different EU countries (UK, France, Italy, and Romania) were investigated for microstructure surface morphology and chemical properties by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDXS). The goal of the current investigation was to determine the chemical composition of selected packaging materials and compare these measurements with data obtained through a carbon-hydrogen-nitrogen-sulfur-oxygen (CHNS-O) elemental analyzer, which is conventionally used to characterize waste materials. The capabilities of the experimental approach are discussed in connection with their application to the study of waste sample materials and in comparison with alternative experimental methods such as elemental analysis. The CHNS-O comparison is made between the present data obtained with SEM-EDXS instrument and EA 3000 elemental analyzer used in previews studies conducted by the authors. Results show a difference of composition among packaging from different countries that can affect the treatment adopted for its valorization and the strategies of circular economy.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Ahmed T, Shahid M, Azeem F, Rasul I, Shah AA, Noman M, Hameed A, Manzoor N, Manzoor I, Muhammad S (2018) Biodegradation of plastics: current scenario and future prospects for environmental safety. Environ Sci Pollut Res 25(8):7287–7298. https://doi.org/10.1007/s11356-018-1234-9
Battini D, Calzavara M, Persona A, Sgarbossa F (2016) Packaging design: general framework and research agenda. Packag Technol Sci 29(1):25–43. https://doi.org/10.1002/pts.993
Choi YW, Moon DJ, Chung JS, Cho SK (2005) Effects of waste PET bottles aggregate on the properties of concrete. Cem Concr Res 35:776–781. https://doi.org/10.1016/j.cemconres.2004.05.014
Ciuta S, Patuzzi F, Baratieri M, Castaldi MJ (2018) Enthalpy changes during pyrolysis of biomass: interpretation of intraparticle gas sampling. Appl Energy 228:1985–1993. https://doi.org/10.1016/j.apenergy.2018.07.061
Da Santa Paula MMS, Medeiros Rodrigues FBB, Bernardin AM, Fiori MAE, Angioletto E (2005) Characterization of aluminized polyethylene blends via mechanical recycling. Mat Sci Eng A Struct 403:37–41. https://doi.org/10.1016/j.msea.2005.05.060
Das P, Tiwari P (2018) Valorization of packaging plastic waste by slow pyrolysis. Resour Conserv Res 128:69–77. https://doi.org/10.1016/j.resconrec.2017.09.025
Eurostat 2016a. https://ec.europa.eu/eurostat/statistics-explained/index.php/Packaging_waste_statistics#Generation_and_recycling_per_inhabitant. Accesed in May 2019
Eurostat 2016b. http://appsso.eurostat.ec.europa.eu/nui/show.do?dataset=env_waspac&lang=en. Accesed in May 2019
Eurostat, 2016c. https://ec.europa.eu/eurostat/statistics-explained/index.php/Municipal_waste_statistics. Accesed in May 2019
Ferreira S, Cabral M, da Cruz NF, Simões P, Marques RC (2017) The costs and benefits of packaging waste management systems in Europe: the perspective of local authorities. J Environ Plan Manag 60(5):773–791. https://doi.org/10.1080/09640568.2016.1181609
Goldstein J, Newbury D, Joy D, Lyman C, Echlin P, Lifshin E, Sawyer L, Michael J (2003) Scanning electron microscopy and X-ray microanalysis. Springer Publisher, London, pp 247–256
Hornsby C, Ripa M, Vassillo C, Ulgiati S (2017) A roadmap towards integrated assessment and participatory strategies in support of. Decision-making processes. The case of urban waste management. J Clean Prod 142:157–172. https://doi.org/10.1016/j.jclepro.2016.06.189
https://www.cec4europe.eu/wp-content/uploads/2018/09/Scharff-The-EU-Circular-Economy-Package-and-CEC4Europe-_2018.pdf, Acessed in Sept 2018
Ionescu G, Bulmău C (2019) Biomass conversion into valuable products within the integrated management of bio-resources. In E3S web of conferences 85:07008. EDP Sci. https://doi.org/10.1051/e3sconf/20198507008
Ionescu G, Ciuta S (2011) Energy analysis of pyrolysis with external heat input from waste packaging fractions. WASET 7(80):851–857
Ionescu G, Mǎrculescu C, Badea A (2011) Alternative solutions for MSW to energy conversion. UPB Sci Bull Ser C 73(3):243–254
Kawashima N, Yagi T, Kojima K (2019) How do bioplastics and fossil-based plastics play in a circular economy? Macromol Mater Eng 304(9):1900383. https://doi.org/10.1002/mame.201900383
Kitching S, Donald AM (1998) Beam damage of polypropylene in the environmental scanning electron microscope: an FTIR study. J Microsc 190(3):357–365. https://doi.org/10.1046/j.1365-2818.1998.00346.x
Ling JSG, Leggett GJ (2007) Scanning force microscopy of poly(ethylene terephthalate) surfaces: comparison of SEM with SFM topographical, lateral force and force modulation data. Polymer 38(11):2617–2625. https://doi.org/10.1016/S0032-3861(97)85594-2
Lombardi F, Lategano E, Cordiner S, Torretta V (2013) Waste incineration in rotary kilns: a new simulation combustion's tool to support design and technical change. Waste Manag Res 31(7):739–750. https://doi.org/10.1177/0734242X13484187
Magnier L, Schoormans J (2017) How do packaging material, colour and environmental claim influence package, brand and product evaluations? Packag Technol Sci 30(11):735–751. https://doi.org/10.1002/pts.2318
Malinauskaite J, Jouhara H, Czajczyńska D, Stanchev P, Katsou E, Rotskowski P, Thorne R, Colon J, Ponsa S, Al-Mansour F, Anguilano L, Krzyzynska R, Vlasopoulos A, Spencer N (2017) Municipal solid waste management and waste-to-energy in the context of a circular economy and energy recycling in Europe. Energ 141:2013–2044. https://doi.org/10.1016/j.energy.2017.11.128
Matheri AN, Mbohwa C, Belaid M, Ngila JC (2018) Design technology for bioenergy conversion of organic fraction of municipal solid waste. In: Filho WL, Surroop D (eds) The Nexus: energy, Environment and Climate Change. Spinger, Berlin, pp 181–201
Miskolczi N, Bartha L, Borszéki J, Halmos P (2006) Determination of sulfur content of diesel fuels and diesel fuel-like fractions of waste polymer cracking. Talanta 69(3):776–780. https://doi.org/10.1016/j.talanta.2005.11.006
Muthuraj R, Misra M, Mohanty AK (2017) Biodegradable compatibilized polymer blends for packaging applications: a literature review. J Appl Polym Sci 134(43):45448. https://doi.org/10.1002/app.45726
Rada EC (2019) Special waste valorization and renewable energy generation, under a circular economy: woch priorities? WIT Trans Ecol Environ 222:145–157. https://doi.org/10.2495/EQ180141
Rada EC, Cioca LI, Ionescu G (2017) Energy recovery from municipal solid waste in EU: proposals to assess the management performance under a circular economy perspective. MATEC Web. Conf. 121: n. 05006. https://doi.org/10.1051/matecconf/201712105006
Rada EC, Zatelli C, Cioca LI, Torretta V (2018) Selective collection quality index for municipal solid waste management. Sustainability 10(257):1–17. https://doi.org/10.3390/su10010257
Ragazzi M, Torretta V, Ionescu G, Istrate IA (2013a) Maintenance strategies and local impact of MSW incinerators. WIT Trans Ecol Environ 176:235–244. https://doi.org/10.2495/ESUS130201
Ragazzi M, Tirler W, Angelucci G, Zardi D, Rada EC (2013b) Management of atmospheric pollutants from waste incineration processes: the case of Bozen. Waste Manag Res 31(3):235–240. https://doi.org/10.1177/0734242X12472707
Ragazzi M, Maniscalco M, Torretta V, Ferronato N, Rada EC (2017) Anaerobic digestion as sustainable source of energy: a dynamic approach for improving the recovery of organic waste. Energy Procedia 19:602–614. https://doi.org/10.1016/j.egypro.2017.07.086
Ranieri E, Ionescu G, Fedele A, Palmieri E, Ranieri AC, Campanaro V (2017) Sampling, characterisation and processing of solid recovered fuel production from municipal solid waste: an Italian plant case study. Waste Manag Res 35(8):890–898. https://doi.org/10.1177/0734242X17716276
Reitsma M, Craig V, Biggs S (2000) Elasto-plastic and visco-elastic deformations of a polymer sphere measured using colloid probe and scanning electron microscopy. Int J Adhes Adhes 20:445–448. https://doi.org/10.1016/S0143-7496(00)00015-4
Rothbard DR (2001) In: Zhigang L (ed) In industrial applications of Electron microscopy. Marcel Dekker Publisher, New York, pp 33–49
Spencer HM, Buckman J, Forster AM, Kennedy CJ (2018) Chemical characterisation of glass waste and crucible fragments from the late 17th - early 18th century Scottish glass manufacturing site at Morison’s Haven, East Lothian. J Archaeol Sci Rep 18:437–446. https://doi.org/10.1016/j.jasrep.2018.01.026
Torretta V, Istrate I, Rada EC, Ragazzi M (2013) Management of waste electrical and electronic equipment in two EU countries: a comparison. Waste Manag 33(1):117–122. https://doi.org/10.1016/j.wasman.2012.07.029
Torretta V, Ionescu G, Raboni M, Merler G (2014) The mass and energy balance of an integrated solution for municipal solid waste treatment. WIT Trans Ecol Environ 180:151–161. https://doi.org/10.2495/WM140131
Wang Z, Guo D, Wang X, Zhang B, Wang B (2018) How does information publicity influence residents’ behaviour intentions around e-waste recycling? Resour Conserv Res 133:1–9. https://doi.org/10.1016/j.resconrec.2018.01.014
Wei Y, Shimaoka T, Saffarzadeh A, Takahashi F (2011) Alteration of municipal solid waste incineration bottom ash focusing on the evolution of iron-rich constituents. Waste Manag 31:1992–2000. https://doi.org/10.1016/j.wasman.2011.04.021
Williams DB, Carter CB (1996) Transmission electron microscopy: a textbook for materials science. Plenum Press, New York
Xu W, Li D, Fu Y (2011) Study on preparation and properties of nano-modified polypropylene. Adv Mater Res 152-153:465–471. https://doi.org/10.4028/www.scientific.net/AMR.152-153.465
Zhuo C, Wang C, Nowak W, Levendi YA (2014) Oxidative heat treatment of 316L stainless steel for effective catalytic growth of carbon nanotubes. Appl Surf Sci 313:227–236. https://doi.org/10.1016/j.apsusc.2014.05.189
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interests.
Additional information
Responsible Editor: Philippe Garrigues
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Rada, E.C., Ionescu, G., Ferronato, N. et al. Zooming on light packaging waste differences by scanning electron microscopy. Environ Sci Pollut Res 28, 59076–59082 (2021). https://doi.org/10.1007/s11356-020-08414-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-020-08414-y