Skip to main content
Log in

Influence of two liquid crystalline polysiloxanes with different average molecular weight as new β-nucleator on crystallization structure of isotactic polypropylene

  • Original Paper
  • Published:
Polymer Bulletin Aims and scope Submit manuscript

Abstract

Two liquid crystalline polymers (LC-N1 and LC-N2) with different average molecular weight were designed and synthesized as a new β-nucleator in isotactic polypropylene (iPP). The main aim of this work was to investigate the influence of LC-N1 and LC-N2 on the crystallization structure and β nucleating activity of the iPP with wide angle X-ray diffraction and polarized optical microscopy. The β nucleation activity not only depended on the nucleator content, mesogenic molecular structure, and thermal processing history, but also on average molecular weight of the liquid crystalline polymers. LC-N1 or LC-N2 has been found to be an effective β-nucleator for the iPP. The experimental results indicated the relative content of β-crystal first increased and then decreased with increasing the nucleator content or crystallization temperature. The addition of LC-N1 or LC-N2 could provide a large number of nuclei, enhance the crystallization rate, reduce the spherulite size, and lead to a more uniform morphology; moreover, the colorful β-crystal was also induced. In addition, LC-N2 with higher average molecular weight is more effective than LC-N1 in inducing β heterogeneous nucleation under same crystallization conditions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Scheme 1
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Padden FJ, Keith HD (1959) Spherulitic crystallization in polypropylene. J Appl Phys 30:1479–1484

    Article  CAS  Google Scholar 

  2. Tjong SC, Shen JS, Li RKY (1996) Morphological behavior and instrumented dart impact properties of β-crystalline phase of polypropylene. Polymer 37:2309–2316

    Article  CAS  Google Scholar 

  3. Kawai T, Iijima R, Yamamoto Y, Kimura T (2002) Crystal orientation of beta-phase isotactic polypropylene induced by magnetic orientation of N, N′-dicyclohexyl-2,6-naphthalenedicarboxamide. Polymer 43:7301–7306

    Article  CAS  Google Scholar 

  4. Huo H, Jiang SC, An LJ, Feng JC (2004) Influence of shear on crystallization behavior of the β Phase in isotactic polypropylene with β-nucleating agent. Macromolecules 37:2478–2483

    Article  CAS  Google Scholar 

  5. Grein C (2005) Toughness of neat, rubber modified and filled β-nucleated polypropylene: from fundamentals to applications. Adv Polym Sci 188:43–104

    Article  CAS  Google Scholar 

  6. Zhou TH, Ruan WH, Rong MZ, Zhang MQ, Mai YL (2007) Keys to toughening of non-layered nanoparticles/polymer composites. Adv Mater 19:2667–2671

    Article  CAS  Google Scholar 

  7. Okabe T, Nishikawa M (2009) GLS strength prediction of glass-fiber reinforced polypropylene. J Mater Sci 44:331–334

    Article  CAS  Google Scholar 

  8. Fujiwara Y (1975) Double-melting behavior of the β-phase of isotactic polypropylene. Colloid Polym Sci 253:273–279

    Article  CAS  Google Scholar 

  9. Lovinger AJ, Chua JO, Gryte CC (1977) Study on the α and β forms of isotactic polypropylene by crystallization in temperature gradient. J Polym Sci Part B Polym Phys 15:641–656

    Article  CAS  Google Scholar 

  10. Varga J, Ehrenstein GW (1996) Formation of β modification in its late stage of crystallization. Polymer 37:5959–5963

    Article  CAS  Google Scholar 

  11. Ellis G, Gomez MA, Macro C (2004) Synchrotron infrared microscopy study of the crystalline morphology of the interphase in polypropylene/LCP-fiber model composites. J Macromol Sci Phys 43:191–206

    Article  Google Scholar 

  12. Sun X, Li H, Wang J, Yan S (2006) Shear-induced interfacial structure of isotactic polypropylene (iPP) in iPP/fiber composites. Macromolecules 39:8720–8726

    Article  CAS  Google Scholar 

  13. Byelov D, Panine P, Remerie K, Biemond E, Alfonso GC (2008) Crystallization under shear in isotactic polypropylene containing nucleators. Polymer 49:3076–3083

    Article  CAS  Google Scholar 

  14. Leugering HJ, Einflu B (1967) der Kristallstruktur und der uberstruktur aufeinige Eigenschaften von Polypropylene. J Macromol Chem 109:204–216

    Article  CAS  Google Scholar 

  15. Garbarczyk J, Paukszta D (1985) Influence of additives on the structure and properties of polymer[A]. 3: study of β → α transition in isotactic polyporopylene at various temperature and times of heating. Colloid Polym Sci 263:985–990

    Article  CAS  Google Scholar 

  16. Fujiyama M (1995) Structures and properties of injection molding of β-crystal nucleator-added polypropylenes. Int Polym Process 2:172–178

    Google Scholar 

  17. Zhang XD, Shi GY (1992) Influence of the nucleating agent content on crystallization and melting behavior of β-phase polypropylene. Acta Polym Sin 3:293–297

    Google Scholar 

  18. Li XJ, Cheung WL (1997) Pimelic acid-based nucleating agents for hexagonal crystalline polypropylene. J Vinyl Addit Technol 3:151–156

    Article  CAS  Google Scholar 

  19. Varga J, Mudra I, Ehrenstein GW (1999) Highly active thermally stable β-nucleating agents for isotactic polypropylene. J Appl Polym Sci 74:2357–2368

    Article  CAS  Google Scholar 

  20. Feng JC, Chen MC (2003) Effects of Lan3+ containing additive on crystalline characteristics of isotactic polypropylene. Polym Int 52:42–45

    Article  CAS  Google Scholar 

  21. Krache R, Benavente R, Lopez-Majada JM et al (2007) Competition between α, β, nd γ polymorphs in a -nucleated metallocenic isotactic polypropylene. Acromolecules 40:6871–6878

    Article  CAS  Google Scholar 

  22. Varga J, Stoll K, Menyhárd A, Horváth Z (2011) Crystallization of isotactic polypropylene in the presence of a beta-nucleating agent based on a trisamide of trimesic acid. J Appl Polym Sci 121:1469–1480

    Article  CAS  Google Scholar 

  23. Stocker W, Schumacher M, Graff S, Thierry A, Wittmann JC, Lotz B (1998) Epitaxial crystallization and AFM investigation of a frustrated polymer structure: isotactic poly(propylene). Macromolecules 31:807–814

    Article  CAS  Google Scholar 

  24. Marco C, Gomez MA, Ellis G, Arribas JM (2002) Activity of a β-nucleating agent for isotactic polypropylene and its influence on polymorphic transitions. J Appl Polym Sci 86:531–539

    Article  CAS  Google Scholar 

  25. Behrendt N, Mohmeyer N, Hillenbrand J et al (2006) Charge storage behavior of isotropic and biaxially-oriented polypropylene films containing α- and β-nucleating agents. J Appl Polym Sci 99:650–658

    Article  CAS  Google Scholar 

  26. Xiao WC, Wu PY, Feng JC (2008) Effect of β-nucleating agents on crystallization and melting behavior of isotactic polypropylene. J Appl Polym Sci 10:3370–3379

    Article  Google Scholar 

  27. Bai HW, Wang Y, Song B et al (2009) Nucleating agent induced impact fracture behavior change in PP/POE blend. Polym Bull 62:405–419

    Article  CAS  Google Scholar 

  28. Kessaraporn T, Pitt S, Supawan T (2004) Effect of calcium stearate and pimelic acid addition on mechanical properties of heterophasic isotactic polypropylene/ethylene-propylene rubber blend. Polym Test 23:533–539

    Article  Google Scholar 

  29. Zhou JJ, Liu JG, Yan SK, Dong JY, Li L, Chan CM, Schultz JM (2005) Atomic force microscopy study of the lamellar growth of isotactic polypropylene. Polymer 46:4077–4087

    Article  CAS  Google Scholar 

  30. Zhang YF, Xin Z (2007) Isothermal crystallization behaviors of isotactic polypropylene nucleated with alpha/beta compounding nucleating agents. J Polym Sci Part B Polym Phys 45:590–596

    Article  CAS  Google Scholar 

  31. Yi QF, Wen XJ, Dong JY, Han CC (2008) A novel effective way of comprising a β-nucleating agent in isotactic polypropylene(i-pp): polymerized dispersion and polymer characterization. Polymer 49:5053–5063

    Article  CAS  Google Scholar 

  32. Hu JS, Kong B, Chao CY, Sun J (2009) Study on liquid-crystalline copolymers as a new β-nucleator to induce crystallization structure of isotactic polypropylene. Chem J Chinese U 30:1253–1255

    CAS  Google Scholar 

  33. Xiao WC, Wu PY, Feng JC, Yao RY (2009) Influence of a novel β-nucleating agent on the structure, morphology, and nonisothermal crystallization behavior of isotactic polypropylene. J Appl Polym Sci 111:1076–1085

    Article  CAS  Google Scholar 

  34. Sun J, Hu JS, Guo ZX, Qi Y (2013) Study on side chain liquid-crystalline copolymer as a new β-nucleating agent to induce phase behavior of isotactic polypropylene. Colloid Polym Sci 291:735–742

    Article  CAS  Google Scholar 

  35. Su ZQ, Dong M, Guo ZX, Yu J (2007) Study of polystyrene and acrylonitrile styrene copolymer as special β-nucleating agents to induce the crystallization of isotactic polypropylene. Macromolecules 40:4217–4224

    Article  CAS  Google Scholar 

  36. Phillips A, Zhu PW, Edward G (2010) Polystyrene as a versatile nucleating agent for polypropylene. Polymer 51:1599–1607

    Article  CAS  Google Scholar 

  37. Machiels AGC, Denys KFJ, Van Dam J, Posthuma de Boer A (1997) Effect of processing history on the morphology and properties of polypropylene/themotropic liquid crystalline polymer blends. Polym Eng Sci 37:59–72

    Article  CAS  Google Scholar 

  38. Sukananta P, Bualek-Limcharoen S (2003) In situ modulus enhancement of polypropylene monofilament through blending with a liquid-crystalline copolyester. J Appl Polym Sci 90:1337–1346

    Article  CAS  Google Scholar 

  39. Sun J, Hu JS, Chao CY, Guo ZX, Qi Y (2010) Influence of liquid crystalline copolysiloxane as a β-form nucleator on crystallization structure and morphology of isotactic polypropylene. Acta Chim Sinica 68:1003–1009

    CAS  Google Scholar 

  40. Hu JS, Kong B, Sun J, Lu HL, Li H (2010) Effect of nematic liquid crystalline copolymer as a novel β-form nucleator on crystallization structure and thermal properties of isotactic polypropylene. Acta Polym Sin 9:1100–1107

    Article  Google Scholar 

  41. Turner-Jones A, Aizlewood JM, Beckett DR (1964) Crystalline forms of isotactic polypropylene. Makromol Chem 75:134–158

    Article  CAS  Google Scholar 

  42. Lotz B, Fillon B, Thierry A, Wittmann JC (1991) Low Tc growth transitions in isotactic polypropylene-beta to alpha and alpha to smectic phases. Polym Bull 25:101–105

    CAS  Google Scholar 

  43. Varga J, Fujiwara Y, Ille A (1990) Beta-alpha-bifurcation of growths during the spherulitic crystallization of polypropylene. Period Polytech Chem Eng 34:255–271

    CAS  Google Scholar 

  44. Lotz B (1998) α and β phases of isotactic polypropylene: a case of growth kinetics phase reentrency in polymer crystallization. Polymer 39:4561–4567

    Article  CAS  Google Scholar 

  45. Boucher E, Folkers JP, Creton C, Hervet H, Leger L (1997) Enhanced adhesion between polypropylene and polyamide-6: role of interfacial nucleation of the β-crystalline form of polypropylene. Macromolecules 30:2102–2109

    Article  CAS  Google Scholar 

Download references

Acknowledgments

This study was supported by Science and Technology Bureau of Shenyang, and Fundamental Research Funds for the Central Universities (N100605001, N110405006 and N110705001).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jian-She Hu.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Sun, J., Li, Q., Yao, XJ. et al. Influence of two liquid crystalline polysiloxanes with different average molecular weight as new β-nucleator on crystallization structure of isotactic polypropylene. Polym. Bull. 70, 2519–2530 (2013). https://doi.org/10.1007/s00289-013-0969-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00289-013-0969-1

Keywords

Navigation