Abstract
Microstructures of two high noble experimental Au-Pt alloys were compared before and after conditioning for biocompatibility, in order to identify phases and microelements responsible for the alloys’ corrosive behaviour. Microstructural characterization was carried-out by optical and scanning electron microscopy, in addition to energy dispersive X-ray analysis. X-ray diffraction was applied to determine the phases’ composition and their contribution in the alloys. Additionally, simultaneous thermal analysis was used to identify the temperatures of phase transformations. An overall assessment before conditioning showed that Au-Pt I is a two-phase alloy containing a dominant Au-rich α1 phase and a minor Pt-rich α2 phase, while the Au-Pt II alloy contains in addition three minor phases: AuZn3, Pt3Zn and Au1.4Zn0.52. The highest content of Zn (up to 6.76 wt.%) was detected in the Pt3Zn phase. After RPMI cell culture medium conditioning, the Pt3Zn and AuZn3 phases disappeared, suggesting that they are predominantly responsible for Zn loss and the lower corrosive stability of the Au-Pt II alloy.
Similar content being viewed by others
References
D. Williams (ed.), Medical & Dental Materials, Oxford OX3, England (1990).
K. J. Anusavice (ed.), Dental Materials, St. Louis (2003).
J. C. Wataha, Journal of Prosthetic Dentistry 83, 223 (2000).
R. Rudolf, T. H. Zupancic, I. Anzel I, P. Mrvar, J. Medved, D. Stamenkovic, RMZ, Mat.Geoenv. 54, 303 (2007).
R. Rudolf, T.H. Zupancic, A. Todorovic, I. Anzel, and B. Kosec, Metalurgija. (Sisak) 47, 203 (2008).
M. Colic, D. Stamenkovic, I. Anzel, G. Lojen, and R. Rudolf, Gold Bull. 42, 34 (2009).
International Center for Diffraction Data, http://www.icdd.com/products/pdf4.html.plus (2006).
ICSD database, FIZ Karlsruhe, http://www.fiz-karlsruhe.de/icds.html (2007).
H. M. Rietveld, Acta Crystallogr. 21, A228 (1966).
R. A. Young, The Rietveld Method, Oxford (1993).
J. C. Taylor, Rietveld: Practical guide, Canberra (2001).
P. Mrvar, M. Trbižan, and J. Medved, Scan. J. Met. 31, 393 (2002).
G. Grube, A. Schneider, U. Esch, Festschrift aus Anlass des 100-Jahrigen Jubilaums W.C. Heraeus G.m.b.H., p. 20 (1951).
S. P. Singhal, H. Herman, and J. K. Hirvonen, Appl. Phys. Lett. 32, 25 (1978).
H. Ipser and R. Krachler, Scr. Metall 22, 1651 (1988).
Y. Khan, B. V. R. Murty, and K. Schubert, J. Less-Common: Met. 21, 293 (1970).
M. Ellner, J. Less-Common: Met. 60, 15 (1978).
T. Shiraishi and M. Ohta, J. Mater. Sci.: Mater. Med. 13, 979 (2002).
I. Ansara and J. P. Nabot, Thermochim. Acta 129, 89 (1988).
K. Gotzman, U. Burkhardt, and M. Ellner, Grin Powder Diffraction 12, 248 (1997).
Nowotny et al., Monatsh. Chem. 83, 221 (1952).
H. Iwasaki, M. Hirabayashi, K. Fujiwara, and J. Wata, Phys. Soc. Jpn. 15, 1771 (1960).
J. N. Wang and W. B. Liu, Gold Bull. 36, 3 (2006).
J. Labarge, D. Treheux, and P. Guiraldeng, Gold Bull. 46, (1979).
I. Watanabe, E. Watanabe, Z. Cai, T. Okabe, and M. Atsuta, Dental Materials (2001).
C. J. Raub and D. Ott, Gold Bull. 16, 2 (1983).
J. F. Bühner, Gold Bull. 38, 3 (2005).
I. Anžel, A. C. Kneissl, L. Kosec, R. Rudolf, and L. Gusel, Z. Met.kd. 94, 9 (2003).
C. W. Corti, Gold Bull. 32, 2 (1999).
J. C. Wataha, Journal of Prosthetic Dentistry 87, 351 (2002).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rudolf, R., Anzel, I., Gusel, L. et al. Microstructural analyses of two high noble gold-platinum alloys before and after conditioning in a cell culture medium. Met. Mater. Int. 16, 931–940 (2010). https://doi.org/10.1007/s12540-010-1211-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-010-1211-4