Skip to main content
Log in

Distribution of heavy metals in surface water of Ranipet industrial area in Tamil Nadu, India

  • Published:
Environmental Monitoring and Assessment Aims and scope Submit manuscript

Abstract

Ranipet industrial area is about 120 km from Chennai on Chennai-Bangalore highway and is a chronic polluted area identified by Central Pollution Control Board of India. It is one of the biggest exporting centers of tanned leather in India. The total number of industries located in and around Ranipet town are 240 tanneries along with ceramic, refractory, boiler auxiliaries plant, and chromium chemicals. Studies were carried out to find out the contamination of surface water bodies due to industrial effluents. The results reveal that the surface water in the area is highly contaminated showing very high concentrations of some of the heavy/toxic metals like Cadmium ranging from 0.2 to 401.4 μg/l (average of 51.1 μg/l), Chromium 2.4–1,308.6 (average of 247.2 μg/l), Copper 2.1–535.5 μg/l (average of 95.5 μg/l), Nickel 1.6–147.0 μg/l (average of 36.7 μg/l), Lead 6.4–2,034.4 μg/l (average of 467.8 μg/l) and Zinc 20.8–12,718.0 μg/l (average of 3,760.4 μg/l). The concentration levels of these metals are much above the permissible limits in surface water and are health hazards especially for the people working in the tannery industries. It was observed that the people in the area are seriously affected and suffering from occupational diseases such as asthma, chromium ulcers and skin diseases. Distribution of metals, their contents at different locations, and their effects on human health are discussed in this paper.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Alloway, B. J. (1995). Heavy metals in soils (pp. 22–151). Glasgow, Scotland: Blackie.

    Google Scholar 

  • Anderson, R. A. (1999). Chromium as an essential nutrient. The chromium file no. 6. Intl. Chromium Development Association.

  • Ansari, A. A., Singh, I. B., & Tobschall, H. J. (1999). Status of anthropogenically induced metal pollution in the Kanpur-Unnao industrial region of the Ganga plain, India. Environmental Geology, 38(1), 25–33.

    Article  CAS  Google Scholar 

  • Appelo, C. A. J., & Postma, D. (1996). Geochemistry, groundwaters and pollution (536 pp). Rotterdam: Balkema.

    Google Scholar 

  • Aswathanarayana, U. (1995). Geoenvironment: An introduction (270 pp). Rotterdam, The Netherlands: Balkema.

    Google Scholar 

  • Balaram, V., & Gnaneshwar Rao, T. (2003). Rapid determination of REEs and other trace elements in geological samples by microwave acid digestion and ICP-MS. Atomic Spectroscopy, 24, 206–212.

    CAS  Google Scholar 

  • Barzilay, J. I., Weinberg, W. G., & Eley, J. W. (1999). The water we drink: Water quality and its effects on health (192 pp). New Brunswick: Rutgers University Press.

    Google Scholar 

  • Bhaskaran, T. R. (1977). Treatment and disposal of tannery effluents. Madras: Central Leather Research Institute (CLRI).

    Google Scholar 

  • BIS (1991). Indian standard drinking water specifications, (IS: 10500). New Delhi: Bureau of Indian Standards.

  • Buurman, P., Van Layen, B., & Velthorst, E. J. (1996). Manual for soil and water analysis (291 pp). Leiden, The Netherlands: Backhuys.

    Google Scholar 

  • Central Leather Research Institute (1990). Report on capacity utilization and scope for modernization in Indian tanning industry (pp 12). Madras: Central Leather Research Institute.

    Google Scholar 

  • Edmunds, W. M., & Savage, D. (1991). Geochemical characteristics of groundwater in granites and related crystalline rocks. In Applied groundwater hydrology – A British perspective (pp. 266–282). Oxford: Clarendon.

    Google Scholar 

  • Edmunds, W. M., & Smedley, P l. (1996). Groundwater geochemistry and health: An overview, publicity publication (12 pp). Wallingford: British Geological Survey.

    Google Scholar 

  • Fendorf, S. E. (1995). Surface reactions of chromium in soils and waters. Geoderma, 67, 55–71.

    Article  CAS  Google Scholar 

  • Ferguson, J. E. (1990). The heavy elements: Chemistry, environmental impacts and health effects. Oxford: Pergamon.

    Google Scholar 

  • Govil, P. K., Rao, T. G., & Rao, R. (1997). Environmental monitoring of toxic elements in an industrial development area: A case study. 3rd Intl. Conference on the analysis of Geological and Environmental materials, Vail, Colorado, USA, June 1–5, Abstract Volume pp. 77.

  • Govil, P. K., Reddy, G. L. N., & Gnaneswara Rao, T. (1999). Environmental pollution due to heavy metals and radiogenic elements in Nacharam Lake India. Journal of Environmental Health, 61, 23–28.

    CAS  Google Scholar 

  • Govil, P. K., Reddy, G. L. N., Krishna, A. K., Seshu, C. L. V. N. S., Satya Priya, V., & Sujatha, D. (2004). Inventorization of contaminated sites in India, NGRI technical report no: NGRI-2004-EG-421, pp. 54–66.

  • Hem, J. D. (1989). Study and interpretation of the chemical characteristics of natural water: USGS Water-Supply Paper 2254, 264 p.

  • Krishna, A. K., & Govil, P. K. (2004). Heavy metal contamination of soil around Pali industrial area, Rajasthan, India. Environmental Geology, 38–44.

  • Larocque, A. C. L., & Rasmussen, P. E. (1998). An overview of trace metals in the environment: Mobilization to remediation. Environmental Geology, 33, 85–91.

    Article  CAS  Google Scholar 

  • Mahimairaja, S., Sakthivel, S., Divakaran, J., Naidu, R., & Ramasamy, K. (2000). Extent and severity of contamination around tanning industries in Vellore district. In R. Naidu et al. (Eds.), Towards better management of soils contaminated with tannery wastes (pp. 75–82). ACIAR Proceedings No. 88.

  • Mielke, H. W., Adams, J. L., Chaney, R. L., Mielke, P. W., & Ravikumar, V. C. (1991). The pattern of Cadmium in the environment of five Minnesota cities. Environmental Geochemistry and Health, 13, 29–34.

    Article  CAS  Google Scholar 

  • Mondal, N. C., Saxena, V. K., & Singh, V. S. (2005). Assessment of groundwater pollution due to tannery industries in and around Dindigul, Tamilnadu, India. Environmental Geology, 48, 149–157.

    Article  CAS  Google Scholar 

  • Mugica, V., Maubert, M., Torres, M., Munoz, J., & Rico, E. (2002). Temporal and spatial Variations of metal content in TSP and PM10 in Mexico City during 1996–1998. Journal of Aerosol Science, 33, 91–102

    Article  CAS  Google Scholar 

  • Nriagu, J. O. (1988). Production and uses of Chromium. In Jo. Nriagu, & E. Niebner (Eds.), Chromium in the natural and human environments (pp. 81–104). New York: Wiley.

    Google Scholar 

  • Rao, M. S., Gopalkrishnan, R., & Venkatesh, B. R. (2001). Medical geology – An emerging field in environmental science. National Symposium on Role of Earth Sciences. Integrated and Related Societal issues. GSI Spl. Pub No 65 (II), pp 213–222.

  • Robards, K., & Worsfold, P. (1991). Cadmium: Toxicology and analysis: A review. Analyst, 116, 549–568.

    Article  CAS  Google Scholar 

  • Romic, M., & Romic, D. (2003) Heavy metal distribution in agricultural topsoils in urban area. Environmental Geology, 43, 795–805.

    CAS  Google Scholar 

  • Romic, M., Romic, D., & Kraljickovic, J. (2001). Copper in Vinyard soils. In Proceedings 9th congress of croation society of soil science, land management and soil protection for future generations, 3–7 July, Brijumi, Croatia.

  • SEGH (2001) Environmental Geochemistry and Health Special Issue. 18th European Conference. Vol. 23, No.3

  • Selvakumar, M., & Manoharan, R. (2002). Effect of tannery effluent in groundwater and its control – A case study at Dindigul. Proc. IGC-2002, Dindigul.

  • Srinivasa Gowd, S., Krishna, A. K., & Govil, P. K. (2005). Environmental risk assessment and remediation of soils contaminated due to waste disposal from tannery industries: A case study of Ranipet industrial area, Tamil Nadu, India. Geochimica et Cosmochimica Acta (GCA), 69(10)1, A 427.

  • Subramanian, K. S., & Selvan, T. A. (2001). Geology of Tamil Nadu and Pondicherry (192 pp). Bangalore: Geological Society of India.

    Google Scholar 

  • Tariq, S. R., Shah, M. H., Shaheen, N., Khalique, A., Manzoor, S., & Jaffar, M. (2006). Multivariate analysis of trace metal levels in tannery effluents in relation to soil and water: A case study from Peshawar, Pakistan. Journal of Environmental Management, 79(1), 20–29.

    Article  CAS  Google Scholar 

  • Tebbutt, T. H. Y. (1983). Relationship between natural water quality and health. Paris: UNESCO.

    Google Scholar 

  • Thangarajan, M. (1999). Modelling pollutant migration in the upper Palar river basin, Tamil Nadu, India. Environmental Geology, 38, 209–222.

    Article  CAS  Google Scholar 

  • USEPA (2003). Drinking water contaminants. National primary drinking water regulations. EPA 816-F-03-016, 6 pp.

  • WHO (1996) Guidelines for drinking water quality (vol. 1) (188 pp). Geneva: World Health Organization.

    Google Scholar 

  • Zhang, C. S., & Selinus, O. (1998). Statistics and GIS in environmental geochemistry- some problems and solutions. Journal of Geochemical Exploration, 64(1–3), 339–354.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Pradip K. Govil.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Srinivasa Gowd, S., Govil, P.K. Distribution of heavy metals in surface water of Ranipet industrial area in Tamil Nadu, India. Environ Monit Assess 136, 197–207 (2008). https://doi.org/10.1007/s10661-007-9675-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10661-007-9675-5

Keywords

Navigation