Abstract
Heterogeneous acetylation of microfibrillated cellulose (MFC) was carried out to modify its physical properties and at the same time to preserve the morphology of cellulose fibrils. The overall reaction success was assessed by FTIR together with the degree of substitution (DS) defined by titration and the degree of surface substitution (DSS) evaluated by means of XPS. Dynamic contact angle measurements confirmed the hydrophobicity improvement relative to non-modified samples. The increase of contact angle upon reaching a certain reaction time and some decrease following the further acetylation was confirmed. Mechanical properties of MFC films made from chemically modified material were evaluated using tensile strength tests which showed no significant reduction of tensile strength. According to SEM images, dimension analysis and tensile strength data, the acetylation seemed not to affect the morphology of cellulose fibrils.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Abdelmouleh M, Boufi S, Belgacem MN, Duarte AP, Ben Salah A, Gandini A (2004) Modification of cellulosic fibres with functionalized silanes:development of surface properties. Int J Adhes Adhes 24:43–54
Aulin C, Ahola S, Josefsson P, Nishino T, Hirose Y, Österberg M, Wågberg L (2009) Nanoscale cellulose films with different crystallinities and mesostructures—Their surface properties and interaction with water. Langmuir 13:7675–7685
Favier V, Canova GR, Cavaillé JY, Chanzy H, Dufresne A, Gauthier C (1994) Nanocomposite materials from latex and cellulose whiskers. Polym Adv Technol 6:351–355
Fellers C, Norman B (1996) Pappersteknik. Avdelingen för Pappersteknik, Kungl Tekniska Högskolan, Stockholm, TABS-Tryckeri AB i Smäland, p 292
Freire CSR, Silvestre AJD, Pascoal Neto C, Belgacem MN, Gandini A (2006) Controlled heterogeneous modification of cellulose fibers with fatty acids: effect of reaction conditions on the extent of esterification and fiber properties. J Appl Polym Sci 100:1093–1102
Hayashi J (1989) Acylation of cellulose with carboxylic acids. Cellul Chem Technol 23:661–670
Heinze Th, Liebert T, Koschella A (2006) Esterification of polisaccharides. Springer, Berlin
Klemm D, Schumann D, Kramer F, Heßler N, Koth D, Sultanova B (2009) Nanocellulose materials—different cellulose, different functionality. Macrom Symp 280:60–71
Ljungberg N, Bonini C, Bortolussi F, Boisson C, Heux L, Cavaill (2005) New nanocomposite materials reinforced with cellulose whiskers in atactic polypropylene: effect of surface and dispersion characteristics. Biomacromolecules 6:2732–2739
Lu J, Askeland P, Drzal LT (2008) Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 49:1285–1296
Malm CJ, Mench JW, Kendall DL, Hiatt GD (1951) Aliphatic acid esters of cellulose. Preparation by acid chloride-pyridine procedure. Ind Eng Chem 43:684–688
Nakagaito AN, Yano H (2005) Novel high-strength biocomposites based on microfibrillated cellulose having nano-order-unit web-like network structure. Appl Phys A 80:155–159
Orts WJ, Shey J, Imam SH, Glenn GM, Guttman ME, Revol J-F (2005) Application of cellulose microfibrils in polymer nanocomposites. J Polym Environ 13:301–306
Panaitescu DM, Vuluga DM, Paven H, Iorga MD, Ghiurea M, Matasaru I, Nechita P (2008) Properties of polymer composites with cellulose microfibrils. Mol Cryst Liq Cryst 47:1228–1234
Parry RT (1993) Principles and applications of modified atmosphere packaging of foods. Chapman & Hall, Suffolk
Paunikallio T, Suvanto M, Pakkanen TT (2006) Viscose fiber/polyamide 12 composites: novel gas-phase method for the modification of cellulose fibers with an aminosilane coupling agent. J Appl Polym Sci 102:4478–4483
Rasband WS (1997) ImageJ, US National Institutes of Health, Bethesda, Maryland, USA, http://rsb.info.nih.gov/ij/
Shirley K, Yu T, Green JB (1989) Determination of total hydroxyls and carboxyls derivatization by infrared spectroscopy. Anal Chem 61:1260–1268
Shogren R (1997) Water vapour permeability of biodegradable polymers. J Environ Polym Degr 5:91–95
Syverud K, Stenius P (2009) Strength and barrier properties of MFC films. Cellulose 16:75–85
Syverud K, Xhanari K, Chinga-Carrasco G, Yu Y, Stenius P (2009) Films made of cellulose nanofibrils—surface modification by adsorption of a cationic surfactant and characterisation by computer-assisted electron microscopy. Submitted to J Nanoparticle Research
Thiebaud S, Borredon ME (1995) Solvent-free wood esterification with fatty acid chlorides. Bioresour Technol 52:169–173
Tserki V, Zafeiropoulos NE, Simon F, Panayiotou C (2005) A study of the effect of acetylation and propionylation surface treatments on natural fibres. Composites part A 36:1110–1118
Tuil RV et al. (2000) In: Weber CJ (ed) Biobased packaging materials for the food industry—status and perspectives. KVL, Cohephagen, pp 27–32
Wang S, Cheng Q, Rials TG and Lee S-H (2006) Cellulose microfibril/nanofibril and its nanocompsites. Proceedings of the 8th Pacific rim bio-based composites symposium
Yuan H, Nishiyama Y, Kuga S (2005) Surface esterification of cellulose by vapour-phase treatment with trifluoroacetic anhydride. Cellulose 12:543–549
Zimmermann T, Pohler E, Geiger T (2004) Cellulose fibrils for polymer reinforcement. Adv Eng Mater 6:754–761
Acknowledgments
The authors would like to thank Leena-Sisko Johansson for assistance with XPS measurement, Dr. Gary Chinga Carrasco for help with analysis of SEM images, Bård Helge Hoff for valuable discussions and Prof. Torbjørn Helle for linguistic help and project partners in SustainBarrier project at PFI for the financial support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rodionova, G., Lenes, M., Eriksen, Ø. et al. Surface chemical modification of microfibrillated cellulose: improvement of barrier properties for packaging applications. Cellulose 18, 127–134 (2011). https://doi.org/10.1007/s10570-010-9474-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-010-9474-y