Abstract
A new method for measuring the strain around the high-temperature creep-crack tip is proposed in the present paper. A grid pattern was described in a space of about 30 μm with a diamond stylus in the area ahead of the precrack of the specimen. Then, the distortion of the grids and the change in specimen thickness which were induced by the creep deformation were measured by means of a photo-microscope and a roughness-measuring system, respectively. The three-dimensional components of the strain were calculated using the Lagrangian equation, into which the above measurement was introduced. The route of the creep-crack extension was examined in association with the local strain measured by the proposed method.
Similar content being viewed by others
References
Landes, J.D. and Begley, J.A., “A Fracture Mechanics Approach to Creep Crack Growth,” ASTM STP 590, 128–148 (1976).
Harper, M.P. andEllison, E.G., “The Use of the C Parameter in Predicting Creep Crack Propagation Rate,”J. Strain Analysis,12,167–179 (1977).
Webster, G.A., “Crack Growth at High Temperature,” Engineering Approaches at High Temperature Design, ed. B. Wilshire and D.R.J. Owen, Pineridge Press Limited, 1–55 (1983).
Taira, S., Ohtani, R. andKitamura, T., “Application of J-Integral to High-Temperature Crack Propagation, Part I-Creep Crack Propagation,”Trans. ASME, J. Eng. Mat. and Tech.,101,154–161 (1979).
Ohji, K., Ogura, K. andKubo, S., “A Simple Evaluation Method of J-Integral under General Yield Condition and Its Application to Creep Crack Problem,”Trans. Jap. Soc. of Mech. Eng.,44,A,1831–1837 (1978).
Obata, M., Shimada, H. andTakahashi, Y., “Creep Crack Initiation and Growth in Incipient Stage, and Localized Strain Distribution at Notch Root in Notched Component of 2024-T6 Aluminum Alloy,”Trans. Jap. Soc. of Mech. Eng.,49,A,668–674 (1983).
Yagawa, G., Matsuura, S. andAndo, Y., “Experimental Non-Contact Type-Strain Analysis Using Picture Processing,”Trans. Jap. Soc. of Mech. Eng.,49,A,1435–1443 (1983).
Ohji, K., Kubo, S., Inukai, T., Imoto, Y. andMatsumoto, A., “An Experimental Study of Creep Crack Growth Behavior During Incipient Stage of Creep Deformation,”Trans. Jap. Soc. of Mech. Eng.,50,A,722–727 (1984).
Bossaert, W., Dechaene, R. andVinckier, A., “Computation of Finite Strains from Moiré Displacement Patterns,”J. Strain Analysis,3,65–75 (1968).
Obata, M., Shimada, H. andKawasaki, A., “Large Deformation Analysis by the Fine Grating Method Considering the Deformation in the Thickness Direction,”J. Jap. Soc. Non-Destructive Inspection,28,485–490 (1979).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hatanaka, K., Fujimitsu, T. & Inoue, H. A measurement of three-dimensional strains around a creep-crack tip. Experimental Mechanics 32, 211–217 (1992). https://doi.org/10.1007/BF02319357
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02319357