Abstract
Interfacial shear strengths in single wire aluminium-stainless steel composites have been measured by the pull-out test, both at room temperature and high temperatures, as a function of annealing temperatures up to 823 K and times up to 24 h. The post-exposure interfacial shear strengths measured at room temperature have been found to be inversely proportional to the square root of the interfacial compound layer thickness. A tentative mechanism to explain this relationship has been proposed in terms of matrix-compound layer debonding. The growth of the compound layer during high-temperature exposure is accompanied by an increase in its microhardness, presumably resulting from a concurrent precipitation of intermetallics. The interfacial shear strength has been found to be independent of stainless steel wire diameter.
Similar content being viewed by others
References
D. M. Karpinos, V. V. Nemoshkalenko, V. V. Gorskii, V. Kh. Kadyrov andV. P. Moroz,Met. Sci. and Heat Treat. 15 (1973) 589.
D. M. Karpinos, V. Kh. Kadyrov, V. P. Moroz andV. V. Didyk,ibid. 17 (1975) 923.
S. K. Mannan, V. Seetharaman andV. S. Raghunathan,Mater. Sci. Engng. 60 (1983) 79.
A. Pattnaik andA. Lawley,Met. Trans. 5 (1974) 111.
R. B. Bhagat, PhD Thesis, Indian Institute of Technology, Bombay (1981).
S. Ochial, Y. Irie, K. Osamura andY. Murakami,Z. Metallkde 74 (1983) 44.
A. Kelly andW. R. Tyson,J. Mech. Phys. Solids 13 (1965) 329.
S. Ochiai, M. Mizuhara, K. Shimomura and Y. Murakami,Trans. Jpn. Inst. Metals 16 (1975) 345.
S. Ochiai, S. Okuda, K. Shimomura andY. Murakami,ibid. 17 (1976) 649.
S. N. Patankar, A. N. Tiwari andV. Gopinathan,ibid. 26 (1985) 772.
G. E. Dieter, “Mechanical Metallurgy”, 2nd Edn (McGraw-Hill, London, 1976) p. 401.
S. G. Denner, R. D. Jones andR. J. Thomas,Iron Steel Int. 48 (1975) 241.
W. J. Whatley andF. E. Wawner,J. Mater. Sci. Lett. 4 (1985) 173.
D. R. Gabe,Rev. High Temp. Mater. 1 (1972) 157.
G. V. Kidson,J. Nucl. Mater. 3 (1961) 21.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tiwari, S.N., Tiwari, A.N. & Gopinathan, V. High temperature interfacial studies in aluminium-stainless steel composites. J Mater Sci 22, 2680–2684 (1987). https://doi.org/10.1007/BF01086456
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01086456