Abstract
The year 2013 saw a rapid boom in the area of the thermoplastic Elastomers recording a market share of more than 19.6 million metric tons and has predicted that the figure should be going beyond 29 million metric tons by 2020 [1]. There are two most bolstered reasons as to why the polymer industry is continuously expanding.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Song, K., Zhang, Y., Meng, J., Green, E.C., Tajaddod, N., Li, H.: Structural polymer-based carbon nanotube composite fibers: understanding the processing_structure-performance relationship. Materials 6(6), 2543–2577 (2013)
Sengupta, R., Chakraborty, S., Bandyopadhyay, S., Dasgupta, S., Mukhopadhyay, R., Auddy, K., Deuri, A.: A short review on rubber/clay nanocomposites with emphasis on mechanical properties. PolymEng Sci. 47, 1956–1974 (2007)
Sui, G., Zhong, W.H., Yang, X.P., Yu, Y.H., Zhao, S.H.: Preparation and properties of natural rubber composites reinforced with pretreated carbon nanotubes. Polym. Adv. Technol. 19, 1543–1549 (2008)
Bhowmick, A.K., Stephens, H.: Handbook of Elastomers. CRC Press, New York, NY (2000)
Chandra, R., Singh, S., Gupta, K.: Damping studies in fiber-reinforced composites-a review. Compos. Struct. 46(1), 41–51 (1999)
Thomas, S., Stephen, R.: Rubber Nanocomposites: Preparation, Properties and Applications. Wiley (2010)
Kato, A., Ikeda, Y., Kohjiya, S.: Carbon black-filled natural rubber composites: physical chemistry and reinforcing mechanism. Polym. Compos. 1, 515–543 (2012)
Liu, X., Wang, L., Zhao, L., He, H., Shao, X., Fang, G., Wan, Z., Zeng, R.: Polym. Compos. 39(4), 1006–1022 (2018)
Novoselov, K.S., Geim, A.K., Morozov, S.V., Jiang, D., Zhang, Y., Dubonos, S.V., Grigorieva, I.V., Firsov, A.A.: Science 306(5696), 666–669 (2004)
Barker, A., Du, X., Skachko, I., Andrei, E.Y.: Nat. Nanotechnol. 3(8), 491–495 (2008)
King, A., Johnson, G., Engelberg, D., Ludwig, W.: Marrow J. Science 321(5887), 382–385 (2008)
Medalia, A.: Effect of carbon black on dynamic properties of rubber vulcanizates. Rubber Chem. Technol. 51(3), 437–523 (1978)
Callister, W.D., Rethwisch, D.G.: Materials Science and Engineering: An Introduction, vol. 7. Wiley, New York, NY (2007)
Adewole, J.K., Al-Mubaiyedh, U.A., Ul-Hamid, A., Al-Juhani, A.A., Hussein, I.A.: Bulk and surface mechanical properties of clay modified HDPE used in liner applications. Can. J. Chem. Eng. 90, 1066–1078 (2012)
Trckova, M., Matlova, L., Dvorska, L.: Kaolin, bentonite, and zeolites as feed supplements for animals: health advantages and risks. A review. Vet Med-UZPI (Czech Republic) 49, 389–399 (2004)
Lau, K-T., Gu, C., Hui, D.: A critical review on nanotube and nanotube/nanoclay related polymer composite materials. Compos. Part B Eng. 37(6), 425–36 (2006)
Li, G., Wang, L., Lichang, W., Ni, H., Pittman, C.: Polyhedral oligomeric silsesquioxane (POSS) polymers and copolymers: a review. J. Inorg. Organomet. Polym. 11, 123–154 (2001)
K. Muralidharan, J.H. Simmons, P.A Deymier, Molecular dynamics studies of brittle fracture in vitreous silica: review and recent progress. J. Non-Crystalline Solids, 351, 1532–1542 (2005)
Bailey, E., Holloway, J.R.: Experimental determination of elastic properties of talc to 800 C, 0.5 GPa; calculations of the effect on hydrated peridotite, and implications for cold subduction zones. Earth Planet Sci. Lett. 183(3), 487–498 (2000)
Tomoko, K., Masayoshi, H., Akihiko, H., Toru, S., Koichi Niihara, N.: Langmuir 14(12), 3160–3163 (1998)
Bhattacharya, M., Maiti, M., Bhowmick, A.K.: Influence of different nanofillers and their dispersion methods on the properties of natural rubber nanocomposites. Rubber Chem. Technol. 81, 782–808 (2008)
Maiti, M., Bhattacharya, M. Bhowmick, A.K.: Elastomer nanocomposites. Rubber Chem. Technol. 81, 384–469 (2008)
Tjong, S.C.: Structural and mechanical properties of polymer nanocomposites. Mat. Sci. Eng. R 53(3–4), 73–197 (2006)
Jancar, J., Douglas, J.F., Starr, F.W., Kumar, S.K., Cassagnau, P., Lesser, A.J.: Current issues in research on structure/property relationships in polymer nanocomposites. Polymer 51(15), 3321–43 (2010)
Montes, H., Chausseé, T., Papon, A., Lequeux, F., Guy, L.: Particles in model filled rubber: dispersion and mechanical properties. Eur. Phys. J. E. 31(3):263–268 (2010)
Kroshefsky, R.D., Price, J.L., Mangaraj, D.: Role of compatibilization in polymer nanocomposites. Rubber Chem. Technol. 82, 340–368 (2009)
Chabert, E., Bornert, M., Bourgeat-Lami, E., Cavaille, J.Y., Dendievel, R., Gauthier, C.: Filler-filler interactions and viscoelastic behavior of polymer nanocomposites. Mat. Sci. Eng. A 381, 320–330 (2004)
Iwamoto, S., Kai, W., Isogai, A., Iwata, T.: Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy. Biomacromol 10(9), 2571–2576 (2009)
Miyake, H., Gotoh, Y., Ohkoshi, Y., Nagura, M.: Tensile properties of wet cellulose. Polym. J. 32, 29–32 (2000)
Bongarde, U., Shinde, V.: Review on natural fiber reinforcement polymer composites. Int. J. Eng. Sci. Innov. Technol. 3(2), 431–436 (2014)
Chandrasekhar, S., Satyanarayana, K.G., Pramada, P.N.: Review processing, properties and applications of reactive silica from rice husk—an overview. J. Mater. Sci. 38, 3159–3168 (2003)
Donnet, J.B., Voet, A.: Carbon Black: Physics, Chemistry, and Elastomer Reinforcement. M. Dekker, New York, NY (1976)
Studebaker, M.L.: The chemistry of carbon black and reinforcement. Rubber Chem. Technol. 30(5), 1400–1483 (1957)
Minus, M., Kumar, S.: The processing, properties, and structure of carbon fibers. JOM 57(2), 52–58 (2005)
Zhang, Y., Tajaddod, N., Song, K., Minus, M.L.: Low temperature graphitization of interphase polyacrylonitrile (PAN). Carbon 91, 479–493 (2015)
Zhang, Y., Song, K., Meng, J., Minus, M.L.: Tailoring polyacrylonitrile interfacial morphological structure by crystallization in the presence of single-wall carbon nanotubes. ACS Appl. Mater. Interfaces 5(3), 807–814 (2013)
Tang, M., Xing, W., Wu, J., Huang, G., Xiang, K., Guo, L., Li, G.: J. Mater. Chem. 3(11), 5942–5948 (2015)
Li, H., Wu, S., Wu, J., Huang, G.: Colloid Polym. Sci. 291(10), 2279–2287 (2013)
De Falco, A., Marzocca, A.J., Corcuera, M.A., Eceiza, A., Mondragon, I., Rubiolo, G.H., Goyanes, S.: J. Appl. Polym. Sci., 113(5), 2851–2857 (2009)
Shanmugharaj, A., Bae, J., Lee, K., Noh, W., Lee, S., Ryu, S.: Compos. Sci. Technol. 67(9), 1813–1822 (2007)
Xing, W., Tang, M., Wu, J., Huang, G., Li, H., Lei, Z., Fu, X., Li, H.: Compos. Sci. Technol. 99, 67–74 (2014)
Xing, W., Wu, J., Huang, G., Li, H., Tang, M., Fu, X.: Polym. Int. 63(9), 1674–1681 (2014)
Wu, J., Zeng, L., Huang, X., Zhao, L., Huang, G.: J. Mater. Chem. 5(29), 15048–15055 (2017)
Ay, A.N., Zumreoglu-Karan, B., Temel, A., Rives, V.: Bioinorganic magnetic coreshell-nanocomposites carrying antiarthritic agents: intercalation of ibuprofen and glucuronic acid into Mg-Al-layered double hydroxides supported on magnesium ferrite. Inorg. Chem. 48, 8871–8877 (2009)
Bagherifam, S., Komarneni, A., Lakzian, A., Fotovat, R., Khorasani, R., Huang, W., Ma, J., Wang, Y.: Evaluation of Zn-Al-SO4 layered double hydroxide for the removal of arsenite and arsenate from a simulated soil solution: isotherms and kinetics. Appl. Clay Sci. 95, 119–125 (2014)
Barahuie, F., Hussein, M.Z., Gani, S.A., Fakurazi, S., Zainal, Z.: Synthesis of protocatechuic acid–zinc/aluminium–layered double hydroxide nanocomposite as ananticancernanodelivery system. J. Solid State Chem. 221, 21–31 (2015)
Barhoumi, H., Maaref, A., Rammah, M., Martelet, C., Jaffrezic, N., Mousty, C., Vial, S., Forano, C.: Urea biosensor based on Zn3Al-urease layered double hydroxides nanohybrid coated on insulated silicon structures. Mater. Sci. Eng., C 26, 328–333 (2006)
Gaines, R.V., Skinner, H.C.W., Foord, E.E., Mason, B., Rosenzweig, A.: Dana’s New Mineralogy, 8th edn. Wiley, New York (1997)
Birgul, Z.K., Ahmet, A.: Layered double hydroxides – multifunctional nanomaterials. Chem. Pap. 66, 1–10 (2012). Bugatti, V., Gorrasi, G., Montanari, F., Nocchetti, M., Tammaro, L., Vittoria, V.: Modified layered double hydroxides in polycaprolactone as a tunable delivery system: in vitro release of antimicrobial benzoate derivatives. Appl. Clay Sci. 52, 34–40 (2011)
Shi, H.M., He, J.: Orientated intercalation of tartrate as chiral ligand to impact asymmetric catalysis. J. Catal. 279, 155–162 (2011)
Roy, S.S., Pouliot, S., Bousmina, M., Utracki, A.: Polymer 45, 8403 (2004)
Costa, F.R., Satapathy, B.K., Wagenknechi, U., Weidisch, R., Heinrich, G.: Eur. Polym. J42, 2140 (2006)
Pradhan, S., Costa, F.R., Wagenknecht, U., Jehinichen, D., Bhowmick, A.K., Heinrich, G.: Eur. Polym. J. 44, 3122 (2008)
Lee, W.D., Im, S.S.: J. Polym. Sci. B: Polym. Phys. 45, 28 (2007)
Wu, G., Wang, L., Evans, D.G., Duan, X.: Eur. J. Inorg. Chem. 2006, 3185 (2006)
Acharya, H., Srivastava, S.K., Bhowmick, A.K.: Compos. Sci. Technol. 67, 2807 (2007)
Oertel, G. (ed.): Polyurethane Handbook. Hanser Publishers, Munich (1989)
Tseng, W.Y., Lin, J.T., Mou, C.Y., Cheng, S., Liu, S.B., Chu, P.P., et al.: J. Am. Chem. Soc. 118, 4411 (1996)
Mishra, G., Dash, B., Pandey, S.: Layered double hydroxides: a brief review from fundamentals to application as evolving biomaterials. Appl. Clay Sci. 153, 172–186 (2018)
Choy, J.H., Oh, J.M., Park, M., Sohn, K.M., Kim, J.W., Choy, J.H., Oh, J.M., Park, M., Sohn, K.M., Kim, J.W.: Inorganic-bio-molecular hybrid nanomaterials as a genetic molecular code system. Adv. Mater. 16, 1181–1184 (2004)
Evans, D.G., Slade, R.C.T.: Layered double hydroxides. Structure and Bonding, vol. 119, pp. 1–87. Springer, Berlin, Germany (2006)
Mishra, G., Dash, B., Pandey, S., Sethi, D., Kumar, C.G.: Comparative evaluation of synthetic routes and antibacterial/antifungal activities of Zn-Al layered double hydroxides containing benzoate anion, 35(3), 247–260 (2017b)
Moaty, S.A.A., Farghali, A.A., Khaled, R.: Preparation, characterization and antimicrobial applications of Zn-Fe LDH against MRSA. Mater. Sci. Eng., C 68, 184–193 (2016)
Morel-Desrosiers, N., Pisson, J., Israeli, Y., Taviot-Gueho, C., Besse, J.P., Morel, J.P.: Intercalation of dicarboxylate anions into a Zn–Al–Cl layered double hydroxide: microcalorimetric determination of the enthalpies of anion exchange. J. Mater. Chem. 13, 2582–2585 (2003)
Moujahid, E.M., Inacio, J., Besse, J.P., Leroux, F.: Adsorption of styrene sulfonate versus polystyrene sulfonate on layered double hydroxides. Microporous Mesoporous Mater. 57, 37–46 (2003)
Zong, X., Wang, L.: Ion-exchangeable semiconductor materials for visible lightinduced photocatalysis. J Photochem. Photobiol. C: Photochem. Rev. 18, 32–49 (2014)
Kuila, T., Srivastava, S.K., Bhowmick, A.K., Saxena, A.K.: Thermoplastic polyolefin based polymer—blend-layered double hydroxide Nanocomposites. Compos. Sci. Technol. 68, 3234–3239 (2008)
Lagaly, G., Beneke, K.: Colloid Polym. Sci. 269, 1198 (1991)
Dekany, I., Berger, F., Imrik, K., Lagaly, G.: Colloid Polym. Sci. 275, 681 (1997)
Pavan, P.C., Crepaldi, E.L., Gomez, G., Valim, J.: Colloids Surf. A 154, 399 (1999)
Esumi, K., Yamamoto, S.: Colloids Surf. A137, 385 (1998)
You, Y.W., Zhao, H.T., Vance, G.F.: Colloids Surf. A205, 161 (2002)
You, Y.W., Zhao, H.T., Vance, G.F.: J. Mater. Chem. 12, 907 (2002)
Celis, R., Koskinen, W.C., Cecchi, A.M., Bresnahan, G.A., Carrisoza, M.J., Ulibarri, M.A., Pavlovic, I., Hermosin, M.C.: J. Environ. Sci. Health B 34, 929 (1999)
Celis, R., Koskinen, W.C., Hermosin, M.C., Ulibarri, M.A., Cornejo, J.: Soil Sci. Soc. Am. J. 64, 36 (2000)
Villa, M.V., Sanchez-Martin, M.J., Sanchez-Camazano, M.: J. Environ. Sci. Health B 34, 509 (1999)
Klumpp, E., Contreras-Ortega, C., Klahre, P., Tino, F.J., Yapar, S., Portillo, C., Stegen, S., Queirolo, F., Schwuger, M.J.: Colloids Surf. A230, 111 (2004)
Kovanda, F., Jindová, E., Lang, K., Kubát, P., Sedláková, Z.: Preparation of layered double hydroxides intercalated with organic anions and their application in LDH/poly(butyl methacrylate) nanocomposites. Appl. Clay Sci. 48, 260–270 (2010)
Zhao, H.T., Nagy, K.L.: J. Colloid Interface Sci. 274, 613 (2004)
Nyambo, C., Wang, D., Wilkie, C.A.: Will layered double hydroxides give nanocomposites with polar or non-polar polymers? Polym. Adv. Technol. 20, 332–340 (2009)
Leroux, F., Besse, J.-P.: Polymer interleaved layered double hydroxide: a new emerging class of nanocomposites. Chem. Mater. 13, 3507–3515 (2001)
Manzi-Nshuti, C., Wang, D., Hossenlopp, J.M., Wilkie, C.A.: Aluminum-containing layered double hydroxides: the thermal, mechanical, and fire properties of (nano) composites of poly(methyl methacrylate). J. Mater. Chem. 18, 3091–3102 (2008)
Fernon, V., Vichot, A., Colombet, P., Damme, H., Bégin, F.: Mater. Sci. Forums 152–153, 335–338 (1994)
Forano, C., Costantino, U., Prévot, V., TaviotGueho, C., 2013. Layered double hydroxides (LDH), in: Bergaya, F., Lagaly, G. (Eds.), Handbook of Clay Science, 2nd edn. Part A: Fundamentals, Developments in Clay Science, vol. 5, pp. 745–782. Elsevier, Amsterdam
Zubair, Mukarram, Daud, Muhammad, Mckay, Gordon, Shehzad, Farrukh, Al-Harthi, Mamdouh: Recent progress in layered double hydroxides (LDH)-containing hybrids as adsorbents for water remediation. Appl. Clay Sci. 143, 272–292 (2017)
Wang, Qiang, O’Hare, Dermot: Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets. Chem. Rev. 112, 4124–4155 (2012)
Adachi-Pagano, M., Forano, C., Besse, J.P.: Chem. Commun. 91 (2000)
O’Leary, S., O’Hare, D., Seeley, G.: Chem. Commun. 1506 (2002)
Jobbágy, M., Regazzoni, A.E.: J. Colloid Interface Sci. 275, 345 (2004)
Naik, V.V., Ramesh, T.N., Vasudevan, S.: J. Phys. Chem. Lett. 2, 1193 (2011)
Naik, V.V., Vasudevan, S.: Langmuir 27, 13276 (2011)
Hibino, T., Jones, W.: J. Mater. Chem. 11, 1321 (2001)
Wypych, F., Bubniak, G.A., Halma, M., Nakagaki, S.: J. Colloid Interface Sci. 264, 203 (2003)
Li, L., Ma, R., Ebina, Y., Iyi, N., Sasaki, T.: Chem. Mater. 17, 4386 (2005)
Wu, Q., Olafsen, A., Vistad, Ø.B., Roots, J., Norby, P.: J. Mater. Chem. 15, 4695 (2005)
Gordijo, C.R., Leopoldo Constantino, V.R., Silva, D.: o. J. Solid State Chem. 2007, 180 (1967)
Hu, G., Wang, N., O’Hare, D., Davis, J.: Chem. Commun. 287 (2006)
Hu, G., O’Hare, D.: J. Am. Chem. Soc. 127, 17808 (2005)
Ulibarri, M.A., Fernandez, J.M., Labajos, F.M., Rives, V.: Anionic clays with variable valence cations: synthesis and characterization of cobalt aluminum hydroxide carbonate hydrate [Co1-xAlx(OH)2](CO3)x/2..nH2O. Chem. Mat. 3, 626e30 (1991)
Ribet, S., Tichit, D., Coq, B., Ducourant B., Morato F.: Synthesis and activation of CoeMgeAl layered double hydroxides. J. Solid State Chem. 142, 382e92 (1999)
Zhang, Z., Hua, Z., Lang, J., Song, Y., Zhang, Q., Han, Q., Fan, H., Gao, M., Li, X., Yang, J.: Eco-friendly nanostructured Zn–Al layered double hydroxide photocatalysts with enhanced photocatalytic activity. CrystEngComm 21, 4607–4619 (2019)
Perez-Bernal, M.E., Ruano-Casero, R.J., Benito, F., Rives, V.: J. Solid State Chem. 182, 1593 (2009)
Wang, C.J., Wu, Y.A., Jacobs, R.M.J., Warner, J.H., Williams, G.R., O’Hare, D.: Chem. Mater. 23, 171 (2011)
Bellezza, F., Cipiciani, A., Costantino, U., Nocchetti, M., Posati, T.: Eur. J. Inorg. Chem. 2603 (2009)
Crepaldi, E.L., Pavan, P.C., Valim, J.B.: Anion exchange in layered double hydroxides by surfactant salt formation. J. Mater. Chem. 10, 1337e43 (2000)
Oh, J.M., Hwang, S.H., Choy, J.H.: The effect of synthetic conditions on tailoring the size of hydrotalcite particles. Solid State Ionics 151, 285e91 (2002)
Ogawa, M., Kaiho, H.: Homogeneous precipitation of uniform hydrotalcite particles. Langmuir 18, 4240e2 (2002)
Costantino, U., Marmottini, F., Nocchetti, M., Vivani, R.: New synthetic routes to hydrotalcite-like compoundsdcharacterisation and properties of the obtained materials. Eur. J. Inorg. Chem. 1998, 1439e46 (1998)
Adachi-Pagano, M., Forano, C., Besse, J.P.: Synthesis of Al-rich hydrotalcite-like compounds by using the urea hydrolysis reaction-control of size and morphology. J. Mater. Chem. 13, 1988e93 (2003)
Rives, V., del Arco, M., Martín, C.: Intercalation of drugs in layered double hydroxides and theircontrolled release: a review. Appl. Clay Sci. 88–89, 239–269 (2014)
Leroux, F., Adachi-Pagano, M.A., Intissar, M., Chauviere, S., Forano, C., Besse, J.P.: Delamination and re-stacking of layered double hydroxides. J. Mater. Chem. 11, 105–112 (2001)
Li, F., Duan, X.: Applications of layered double hydroxides. In: Duan, X., Evans, D.G. (eds.) Structure and Bonding. Springer, vol. 119, pp. 193–223. New York, NY, USA (2006)
Haraketi, M., Hosni, K., Srasra, E.: Intercalation of salicylic acid into Zn-Al and Mg- Al layered doublehydroxides for a controlled release formulation. Colloid J. 78(4), 533–541 (2016)
Yun, S.K., Pinnavaia, T.J.: Water content and particle texture of synthetic hydrotalcite-like layered double hydroxides. Chem. Mat. 7, 348e54 (1995)
Karmakar, A., Alam, M.: A review Study on The Methods for LDH Preparation (2019). https://www.researchgate.net/publication/334388101_A_review_Study_on_The_Methods_for_LDH_Preparation. Accessed from on 20/01/2020
Lee, W.D., Im, S.S.: Thermomechanical properties and crystallization behavior of layered double hydroxide/poly(ethylene terephthalate) nanocomposites prepared by in-situ polymerization. J. Polym. Sci., Part B: Polym. Phys. 45(1), 28–40 (2007)
Chen, W., Feng, L., Qu, B.: Structural characterization and thermal and mechanical properties of poly(propylene carbonate)/MgAl-LDH exfoliation nanocomposite via solution intercalation. Compos. Sci. Technol. 66, 913–918 (2006)
Costa, F.R., Satapathy, B.K., Wagenknechi, U., Weidisch, R., Heinrich, G.: Morphology and fracture behaviour of polyethylene/Mg–Al layered double hydroxide (LDH) nanocomposites. Eur. Polym. J. 42(9), 2140–2152 (2006)
Wu, G., Wang, L., Evans, D.G., Duan, X.: Layered double hydroxides containing intercalated zinc sulfide nanoparticles: synthesis and characterization. Eur. J. Inorg. Chem. 2006(16), n3185–n3196 (2006)
Hitzky, E.R., Darder, M., Aranda, P.: J. Mater. Chem. 15, 3650 (2005)
Messersmith, P.B., Stupp, S.I.: Chem. Mater. 7, 454 (1995)
Darder, M., Aranda, P., Hitzky, E.R.: Adv. Mater. 19, 1309 (2007)
Jacob, M.M.E., Hackett, E., Giannelis, E.P.: J. Mater. Chem. 13, 1 (2003)
Hsueh, H.B., Chen, C.Y.: Polymer 44, 5275 (2003)
Lee, W.D., Im, S.S., Lim, H.M., Kim, K.J.: Polymer 47, 1364 (2006)
Leroux, F., Gachon, J., Besse, J.P.: J. Solid State Chem. 177, 245 (2004)
Ding, P., Qu, B.J.J.: Polym. Sci. B: Polym. Phys. 44, 3165 (2006)
Kuila, T., Acharya, H., Srivastava, S.K., Bholomica, A.K.: J. Appl. Polym. Sci. 108, 1329 (2008)
Schollhorn, R.: Chem. Mater. 8, 1747 (1996)
Tanaka, M., Park, I.Y., Kuroda, K., Kato, C.: Bull. Chem. Soc. Jpn 62, 3442 (1989)
Hsueh, H.B., Chen, C.Y.: Polymer 44, 1151 (2003)
Qiu, L., Chen, W., Qu, B.: Colloid Polym. Sci. 283, 1241 (2005)
Ding, P., Qu, B.: J. Colloid Interface Sci. 291, 13 (2005)
Qiu, L., Qu, B.: J. Colloid Interface Sci. 301, 347 (2006)
Chen, W., Qu, B.: Chem. Mater. 15, 3208 (2003)
Chen, W., Qu, B.: J. Mater. Chem. 14, 1705 (2004)
Chen, W., Feng, L., Qu, B.J.: Chem. Mater. 16, 368 (2004)
Chen, W., Feng, L., Qu, B.J.: Solid State Commun. 130, 259 (2004)
Peng, H., Han, Y., Liu, T., Tjiu, W.C., He, C.: Thermochim. Acta 502, 1 (2010)
Zammarano, M., Bellayer, S., Gilman, J.W., Franceschi, M., Beyer, F.L., Harris, R.H., Meriani, S.: Polymer 47, 652 (2006)
Du, L., Qu, B.: Chin. J. Chem. 24, 1342 (2006)
Li, B., Hu, Y., Liu, J., Chen, Z., Fan, W.: Colloid Polym. Sci. 281, 998 (2003)
Huang, S., Peng, H., Tjiu, W.W., Yang, Z., Zhu, H., Tang, T., Liu, T.: J. Phys. Chem. B 114, 16766 (2010)
Zhao, Y., Yang, W., Xue, Y., Wang, X., Lin, T.: J. Mater. Chem. 21, 4869 (2011)
Yuan, Y., Zhang, Y., Shi, W.: Appl. Clay Sci. 53, 608 (2011)
Xu, Z.P., Stevenson, G.S., Lu, C.Q., Lu, G.Q., Bartlett, P.F., Gray, P.P.: Stable suspension of layered double hydroxide nanoparticles in aqueous solution. J. Am. Chem. Soc. 128, 3, 6–7 (2005)
Liu, Z., Ma, R., Ebina, Y., Iyi, N., Takada, K., Sasaki, T.: General synthesis and delamination of highly crystalline transition-metal-bearing layered double hydroxides. Langmuir 23(86), 1–7 (2006)
Marcelin, G., Stockhausen, N.J., Post, J.F.M., Schutz, A.: Dynamics and ordering of intercalated water in layered metal-hydroxides. J. Phys. Chem. 93(46), 46–50 (1989)
Pesic, L., Salipurovic, S., Markovic, V., Vucelic, D., Kagunya, W., Jones, W.: Thermalcharacteristics of a synthetic hydrotalcite-like material. J. Mater. Chem. 2(10), 69–73 (1992)
Parker, L.M., Milestone, N.B., Newman, R.H.: The use of hydrotalcite as an anion absorbent. Ind. Eng. Chem. Res. 34, 1196e202 (1995). [29] Inacio, J., Taviot-Gueho, C., Forano, C., Besse, J.P.: Adsorption of MCPA pesticide by MgAl-layered double hydroxides. Appl. Clay Sci. 18(2), 55–64 (2001)
Ulibarri, M.A., Pavlovic, I., Barriga, C., Hermosıń, M.C., Cornejo, J.: Adsorption of anionic species on hydrotalcite-like compounds: effect of interlayer anion and crystallinity. Appl. Clay Sci. 18, 17–27 (2001)
Kotal, M., Srivastava, S.K., Bhowmick, A.K.: Thermoplastic polyurethane and nitrile butadiene rubber blends with layered double hydroxide nanocomposites by solution blending. Polym. Int. 59(1), 2–10 (2010)
Kotal, M., Kuila, T., Srivastava, S.K., Bhowmick, A.K.: Synthesis and characterization of polyurethane/Mg-Al layered double hydroxide nanocomposites. J. Appl. Polym. Sci. 114(5), 2691–2699 (2009)
Yang, W., Ma, L., Song, L., Hu, Y.: Fabrication of thermoplastic polyester elastomer/layered zinc hydroxide nitrate nanocomposites with enhanced thermal, mechanical and combustion properties. Mater. Chem. Phys. 141(1), 582–588 (2013)
Kotal, M., Srivastava, S.K., Bhowmick, A.K., Chakraborty, S.K.: Morphology and properties of stearate-intercalated layered double hydroxide nanoplatelet-reinforced thermoplastic polyurethane. Polym. Int. 60(5), 772–780 (2011)
Alexandre, M., Dubois, P.: Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater. Sci. Eng.: R: Rep. 28(1), 1–63 (2000)
Balasubramanian, M., Jawahar, P.: Nanocomposites based on inorganic nanoparticles. Polym. Nanocompos. Based Inorg. Org. Nanomater. 257–346 (2015)
Clocker, E.T., Paterek, W., Farel, N.D., Selsley, M.J.: Conversion of clay to its colloidal form by hydrodynamic attrition. Google Patents (1976)
DeKimpe, C., Gastuche, M., Brindley, G.W.: Ionic coordination in alumino-silicic gels in relation to clay mineral formation. Am. Mineral. 46(11–2), 1370–1381 (1961)
Eckel, D.F., Balogh, M.P., Fasulo, P.D., Rodgers, W.R.: Assessing organo-clay dispersion in polymer nanocomposites. J. Appl. Polym. Sci. 93(3), 1110–1117 (2004)
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Kurauchi, T., Kamigaito, O.: J Polym. Sci., Part A: Polym. Chem. 31, 1755 (1993)
Kubies, D., Pantoustier, N., Dubois, P., Rulmont, A., Jerome, R.: Controlled ring-opening polymerization of ε-caprolactone in the presence of layered silicates and formation of nanocomposites. Macromolecules 35, 3318 (2002)
Lepoittevin, B., Pantoustier, N., Devalckenaere, M., Alexandre, M., Kubies, D., Calberg, C., Jerome, R., Dubois, P.: Poly(ε-caprolactone)/clay nanocomposites by in-situ intercalative polymerization catalyzed by dibutyltin dimethoxide. Macromolecules 3, 8385 (2002)
Theng, B.K.G.: Formation and Properties of Clay-Polymer Complexes, vol. 4. Elsevier (2012)
Grim, R.: Clay Mineralogy. McGraw-Hill, New York (1968)
http://jan.ucc.nau.edu/doetqp/courses/env440/env440_2/lectures/lec19/Fig19_3.gif. Access date 4.11.06
http://www.pslc.ws/macrog/mpm/composit/nano/struct3_1.htm. Access date 4.11.06
Roy, R.: The preparation and properties of synthetic clay minerals. Genese et Synthese des Argiles, Colloques Intern Centre Nat Recherche Sci (1962)
Sadhu, S., Bhowmick, A.: Morphology study of rubber based nanocomposites by transmission electron microscopy and atomic force microscopy. J. Mater. Sci. 40(7), 1633–1642 (2005)
Guo, F., Aryana, S., Han, Y., Jiao, Y.: A review of the synthesis and applications of polymer-nanoclay composites. Appl. Sci. 8, 1696 (2018)
Jlassi, K., Krupa, I., Chehimi, M.M.: Overview: clay preparation, properties, modification. In: Jlassi, K., Chehimi, M.M., Thomas, S. (eds.) Clay-Polymer Nanocomposites, pp. 1–28. Elsevier, Amsterdam, The Netherlands (2017)
Jordan, J.W.: Organophilic bentonites: i swelling in organic liquids. J. Phys. Chem. 53(2), 294–306 (1949)
Van Olphen, H.: An Introduction to Clay Colloidal Chemistry, pp. 66–67. Wiley, New York (1977)
Giannelis, E.P.: Polymer layered silicate nanocompo-sites. Adv. Mater. 8(1), 29–35 (1996)
Maiti, P., Yamada, K., Okamoto, M., Ueda K., Oka-moto, K.: New polylactide/layered silicate nanocomposites: role of organoclays. Chem. Mater. 14(11), 4654–4661 (2002)
Vaia, R.A., Teukolsky, R.K., Giannelis, E.P.: Inter-layer structure and molecular environment of alkylam-monium layered silicates. Chem. Mater. 6(7), 1017–1022 (1994)
Xie, W., Gao, Z., Pan, W., Hunter, D., Singh, A., Vaia, R.: Thermal Degradation chemistry of alkyl quaternary ammonium MMT. Chem. Mater. 13(9), 2979–2990 (2001)
Li, Y., Ishida, H.: A study of morphology and inter-calation kinetics of polystyrene-organoclay nanocom-posites. Macromolecules 38(15), 6513–6519 (2005)
Zhu, J., Morgan, A., Lamelas, F., Wilkie, C.: Fire properties of polystyrene-clay nanocomposites. Chem. Mater. 13(10), 3774–3780 (2001)
Hartwig, A., Putz, D., Schartel M., Wendschuh-Josties, M.: Combustion behaviour of epoxide based nano-composites with ammonium and phosphonium bento-nites. Macromol. Chem. Phys. 204(18), 2247–2257 (2003)
Hrobarikova, J., Robert, J.L., Calberg, C., Jerome R., Grandjean, J.: Solid-state NMR study of intercalated spe-cies in poly(ε-caprolactone)/clay nanocomposites. Langmuir, 20(22), 9828–9833 (2004)
Kim, M., Park, C., Choi, W., Lee, J., Lim, J., Park, O., Kim, J.: Synthesis and material properties of syndiotactic polystyrene/organophilic clay nanocomposites. J. Appl. Polym. Sci. 92(4), 2144–2150 (2004)
Xie, W., Xie, R., Pan, W., Hunter, D., Koene, B., Tan, L., Vaia, R.: Thermal stability of quaternary phosphonium modified montmorillonites. Chem. Mater. 14(11), 4837–4845 (2002)
Singla, P., Mehta, R., Upadhyay, S.N.: Clay modification by the use of organic cations. Green Sustain. Chem. 2, 21–25 (2012)
Lin, J.-J., Chan, Y.-N., Lan, Y.-F.: Hydrophobic modification of layered clays and compatibility for epoxy nanocomposites. Materials 3, 2588–2605 (2010)
Mahadevaiah, N., Venkataramani, B., Prakash, B.S.J.: Restrictive entry of aqueous molybdate species into surfactant modified montmorillonite-a breakthrough curve study. Chem. Mater. 19, 4606–4612 (2007)
Lan, T., Kaviratna, P.D., Pinnavaia, T.J.: Chem. Mater. 7, 2144 (1995)
Chou, C.C., Chiang, M.L., Lin, J.J.: Unusual intercalation of cationic smectite clays with detergent-ranged carboxylic ions. Macromol. Rapid Commun. 26, 1841–1845 (2005)
Vo, V.S., Mahouche-Chergui, S., Babinot, J., Nguyen, V.H., Naili, S., Carbonnier, B.: Photo-induced SI-ATRP for the synthesis of photoclickable intercalated clay nanofillers. RSC Adv. 6, 89322–89327 (2016)
Alexandre, M., Dubois, P.: Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater. Sci. Eng. R Rep. 28, 1–63 (2000)
Beyer, G.: Nanocomposites: a new class of flame retardants for polymers. Plast. Addit. Compd. 4, 22–28 (2002)
Gurses, A.: Introduction to Polymer-Clay Nanocomposites; Pan Stanford: Singapore, 54 (2015). Fischer, H., Gielgens, L., Koster, T.: Nanocomposites from polymers and layered minerals. Acta Polym. 50, 122–126 (1999)
Mittal, V.: Advances in Polyolefin Nanocomposites. CRC Press, Boca Raton, FL, USA (2010)
Rane, A.V., Kanny, K., Abitha, V.K., Patil, S.S., Thomas, S.: Clay–polymer composites: design of clay polymer nanocomposite by mixing. In: Clay-Polymer Nanocomposites; Elsevier: Amsterdam, The Netherlands, pp. 113–144 (2017)
Cherifi, Z., Boukoussa, B., Zaoui, A., Belbachir, M., Meghabar, R.: Structural, morphological and thermal properties of nanocomposites poly (GMA)/clay prepared by ultrasound and in-situ polymerization. Ultrason. Sonochem. 48, 188–198 (2018)
Lopez-Manchado, M., Herrero, B., Arroyo, M.: Organoclay–natural rubber nanocomposites synthesized by mechanical and solution mixing methods. Polym. Int. 53, 1766–1772 (2004)
Vassiljeva, V., Kirikal, K.-K., Hietala, S., Kaljuvee, T., Mikli, V., Rähn, M., Tarasova, E., Krasnou, I., Viirsalu, M., Savest, N.: One-step carbon nanotubes grafting with styrene-co-acrylonitrile by reactive melt blending for electrospinning of conductive reinforced composite membranes. Fullerenes Nanotub. Carbon Nanostruct. 25, 667–677 (2017)
Lago, E., Toth, P.S., Pugliese, G., Pellegrini, V., Bonaccorso, F.: Solution blending preparation of polycarbonate/graphene composite: Boosting the mechanical and electrical properties. RSC Adv. 6, 97931–97940 (2016)
Abbasian, M., Pakzad, M., Amirmanesh, M.: Polymericaly modified clays to preparation of polystyrene nanocomposite by nitroxide mediated radical polymerization and solution blending methods. Polym. Compos. 38, 1127–1134 (2017)
Debnath, D., Dhibar, A.K., Khatua, B.: Studies on the morphology and properties of PMMA-organoclay nanocomposites with reference to the manufacturing techniques. Polym. Plast. Technol. Eng. 49, 1087–1094 (2010)
Ports, B.F., Weiss, R.: One-step melt extrusion process for preparing polyolefin/clay nanocomposites using natural montmorillonite. Ind. Eng. Chem. Res. 49, 11896–11905 (2010)
Jollands, M., Gupta, R.K.: Effect of mixing conditions on mechanical properties of polylactide/montmorillonite clay nanocomposites. J. Appl. Polym. Sci. 118, 1489–1493 (2010)
Yarahmadi, N., Jakubowicz, I., Hjertberg, T.: Development of poly(vinyl chloride)/montmorillonite nanocomposites using chelating agents. Polym. Degrad. Stab. 95, 132–137 (2010)
Albdiry, M., Yousif, B., Ku, H., Lau, K.: A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites. J. Compos. Mater. 47, 1093–1115 (2013)
Ercan, N., Durmus, A., Ka¸sgöz, A.: Comparing of melt blending and solution mixing methods on the physical properties of thermoplastic polyurethane/organoclay nanocomposite films. J. Thermoplast. Compos. Mater. 30, 950–970 (2017)
Quigley, J.P., Baird, D.G.: Improved mechanical properties of organoclay/nylon 6 nanocomposites prepared via a supercritical carbon dioxide-aided, melt blending method. Polym. Compos. 36, 527–537 (2015)
Huang, Y., Yang, K., Dong, J.Y.: Copolymerization of ethylene and 10-undecen-1-ol using a montmorillonite-intercalated metallocene catalyst: synthesis of polyethylene/montmorillonite nanocomposites with enhanced structural stability. Macromol. Rapid Commun. 27, 1278–1283 (2006)
Asensio, M., Herrero, M., Núñez, K., Gallego, R., Merino, J.C., Pastor, J.M.: In situ polymerization of isotactic polypropylene sepiolite nanocomposites and its copolymers by metallocene catalysis. Eur. Polym. J. 100, 278–289 (2018)
Ozkose, U.U., Altinkok, C., Yilmaz, O., Alpturk, O., Tasdelen, M.A.: In-situ preparation of poly(2-ethyl-2-oxazoline)/clay nanocomposites via living cationic ring-opening polymerization. Eur. Polym. J. 88, 586–593 (2017)
Herrero, M., Núñez, K., Gallego, R., Merino, J.C., Pastor, J.M.: Control of molecular weight and polydispersity in polyethylene/needle-like shaped clay nanocomposites obtained by in situ polymerization with metallocene catalysts. Eur. Polym. J. 75, 125–141 (2016)
Hua, J., Liu, J., Wang, X., Yue, Z., Yang, H., Geng, J., Ding, A.: Structure and properties of a cis-1, 4-polybutadiene/organic montmorillonite nanocomposite prepared via in situ polymerization. J. Macromol. Sci. Part B 56, 451–461 (2017)
Dietlin, C., Schweizer, S., Xiao, P., Zhang, J., Morlet-Savary, F., Graff, B., Fouassier, J.-P., Lalevée, J.: Photopolymerization upon LEDs: new photoinitiating systems and strategies. Polym. Chem. 6, 3895–3912 (2015)
Chen, M., Zhong, M., Johnson, J.A.: Light-controlled radical polymerization: mechanisms, methods, and applications. Chem. Rev. 116, 10167–10211 (2016)
Yagci, Y., Jockusch, S., Turro, N.J.: Photoinitiated polymerization: advances, challenges, and opportunities. Macromolecules 43, 6245–6260 (2010)
Utama, R.H., Drechsler, M., Förster, S., Zetterlund, P.B., Stenzel, M.H.: Synthesis of pH-responsive nanocapsules via inverse miniemulsion periphery RAFT polymerization and post-polymerization reaction. ACS Macro Lett. 3, 935–939 (2014)
Beyazit, S., Bui, B.T.S., Haupt, K., Gonzato, C.: Molecularly imprinted polymer nanomaterials and nanocomposites by controlled/living radical polymerization. Prog. Polym. Sci. 62, 1–21 (2016)
Arslan, M., Tasdelen, M.: Polymer Nanocomposites via click chemistry reactions. Polymers 9, 499 (2017)
Yadav, P., Chacko, S., Kumar, G., Ramapanicker, R., Verma, V.: Click chemistry route to covalently link cellulose and clay. Cellulose 22, 1615–1624 (2015)
Xie, H., Wu, Q., Shi, W.: Preparation of photopolymerized nanocomposites through intercalating multifunctional acrylated siloxane into montmorillonite. Appl. Clay Sci. 99, 164–170 (2014)
Shanmugam, S., Boyer, C.: Stereo-, temporal and chemical control through photoactivation of living radical polymerization: Synthesis of block and gradient copolymers. J. Am. Chem. Soc. 137, 9988–9999 (2015)
Zhang, H., Zhu, X., Wu, Y., Song, H., Ba, X.: High-efficiency grafting of halloysite nanotubes by using π-conjugated polyfluorenes via “click” chemistry. J. Mater. Sci. 50, 4387–4395 (2015)
Pan, C., Liu, P.: Surface modification of attapulgite nanorods with nitrile butadiene rubber via thiol-ene interfacial click reaction: grafting or crosslinking. Ind. Eng. Chem. Res. 57, 4949–4954 (2018)
Gul, S., Kausar, A., Muhammad, B., Jabeen, S.: Research progress on properties and applications of polymer/clay nanocomposite. Polym. Plast. Technol. Eng. 55, 684–703 (2016)
Kumar, S., Nehra, M., Dilbaghi, N., Tankeshwar, K., Kim, K.H.: Recent advances and remaining challenges for polymeric nanocomposites in healthcare applications. Prog. Polym. Sci. 80, 1–38 (2018)
Wang, X.-C., Zhu, Q.-S., Dong, B.-B., Wu, H.-H., Liu, C.-T., Shen, C.-Y., … Geng, T.: The effects of nanoclay and deformation conditions on the inelastic behavior of thermoplastic polyurethane foams. Polym. Test. 79, 106043 (2019)
Pizzatto, L., Lizot, A., Fiorio, R., Amorim, C.L., Machado, G., Giovanela, M., Zattera, A.J., Crespo, J.S.: Mater. Sci. Eng., C 29, 474 (2009)
Arenas, J.P., Castaño, J.L., Troncoso, L., Auad, M.L.: Thermoplastic polyurethane/laponite nanocomposite for reducing impact sound in a floating floor. Appl. Acoust. 155, 401–406 (2019)
Pattanayak, A., Jana, S.C.: Synthesis of thermoplastic polyurethane nanocomposites of reactive nanoclay by bulk polymerization methods. Polymer 46(10), 3275–3288 (2005)
Barick, A.K., Tripathy, D.K.: Effect of organically modified layered silicate nanoclay on the dynamic viscoelastic properties of thermoplastic polyurethane nanocomposites. Appl. Clay Sci. 52(3), 312–321 (2011)
Mahallati, Paridokht, Arefazar, A., Naderi, Ghasem: Thermoplastic elastomer nanocomposites based on PA6/NBR. Int. Polym. Process.—Int. Polym. Proc. 25, 132–138 (2010)
Singh, V., Joung, D., Zhai, L., Das, S., Khondaker, S.I., Seal, S.: Graphene based materials: past, present and future. Prog. Mater Sci. 56, 1178–1271 (2011)
Kim, H., Abdala, A.A., Macosko, C.W.: Graphene/polymer nanocomposites. Macromolecules 43, 6515–6530 (2010)
Moniruzzaman, M., Winey, K.I.: Polymer nanocomposites containing carbon nanotubes. Macromolecules 39, 5194–5205 (2006)
Thostenson, E.T., Ren, Z.F., Chou, T.W.: Advances in the science and technology of carbon nanotubes and their composites: a review. Compos. Sci. Technol. 61, 1899–1912 (2001)
Shanmugharaj, A., Bae, J., Lee, K., Noh, W., Lee, S., Ryu, S.: Physical and chemical characteristics of multiwalled carbon nanotubes functionalized with aminosilane and its influence on the properties of natural rubber composites. Compos. Sci. Technol. 67, 1813–1822 (2007)
Bandaru, P.R.: Electrical properties and applications of carbon nanotube structures. J. Nanosci. Nanotechnol. 7, 1239–1267 (2007)
Iijima, S.: Helical microtubes of graphitic carbon. Nature 354, 56–58 (1991)
Bernholc, J., Brenner, D., Nardelli, M.B., Meunier, V., Roland, C.: Mechanical and electrical properties of nanotubes. Annu. Rev. Mater. Res. 32, 347–375 (2002)
Du, J.H., Bai, J., Cheng, H.M.: The present status and key problems of carbon nanotubes based polymer composites. Express Polym Lett. 1, 253–273 (2007)
de Heer, W.A.: Nanotubes and the pursuit of applications. MRS Bull. 29, 281–285 (2004)
Uchida, T., Kumar, S.: Single wall carbon nanotube dispersion and exfoliation in polymers. J. Appl. Polym. Sci. 98, 985–989 (2005)
Steinhauser, D.: Influence of ionic liquids on the dielectric relaxation behavior of CNT based elastomer nanocomposites. Express Polym. Lett. 6, 927–936 (2012)
Sui, G., Zhong, W.H., Yang, X.P., Yu, Y.H.: Curing kinetics and mechanical behavior of natural rubber reinforced with pretreated carbon nanotubes. Mater. Sci. Eng., A 485, 524–531 (2008)
Meyyappan, M., Delzeit, L., Cassell, A., Hash, D.: Carbon nanotube growth by PECVD: a review. Plasma Sourc. Sci. Technol. 12(2), 205–216 (2003)
Lin, T., Bajpai, V., Ji, T., Dai, L.: Chemistry of carbon nanotubes. Aust. J. Chem. 56(7), 635–651 (2003)
https://en.wikipedia.org/wiki/Carbon_nanotube#Nanotube_types. Accessed on 30/01/2020
Yu, M.F., Files, B.S., Arepalli, S., Ruoff, R.S.: Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties. Phys. Rev. Lett. 84(24), 5552–5555 (2000)
Xie, S., Li, W., Pan, Z., Chang, B., Lianfeng, S.: Mechanical and physical properties on carbon nanotube. J. Phys. Chem. Solids 61(7), 1153–1158 (2000)
Elliott, J.A., Sandler, J.K.W., Windle, A.H., Young, R.J., Shaffer, M.S.P.: Collapse of single-walled carbon nanotubes is diameter dependent. Phys. Rev. Lett. 92(9), 1–4 (2004)
Iijima, S., Ichihashi, T.: Nature (London) 363, 603 (1993)
Bethune, D.S., Kiang, C.H., de Vries, M.S., Gorman, G., Savoy, R., Vazquez, J., Beyers, R.: Nature (London) 363, 605 (1993)
Ebbesen, T.W., Ajayan, P.M.: Nature (London) 358, 220 (1992)
Journet, C., Maser, W.K., Bernier, P., Loiseau, A., Lamy de la Chapelle, M., Lefrant, S., Deniard, P., Lee, R., Fischer, J.E.: Nature (London) 388, 756 (1997)
http://www.timesnano.com/en/show.php?prt=2,72,135&id=406. Accessed 30/01/2020
Liu, J., Rinzler, A.G., Dai, H., Hafner, J.H., Bradley, R.K., Boul, P.J., Lu, A., Iverson, T., Shelimov, K., Huffman, C.B., Rodriguex-Macia, F., Colbert, D.T., Smalley, R.E.: Science 280, 1253 (1998)
Mamalis, A.G., Vogtländer, L.O.G., Markopoulos, A.: Precis. Eng. 28, 16 (2004)
Li, W.Z., Xie, S.S., Qian, L.X., Chang, B.H., Zou, B.S., Zhou, W.Y.: Science 274, 1701 (1996)
Kumar, Mukul, Ando, Yoshinori: Chemical vapor deposition of carbon nanotubes: a review on growth mechanism and mass production. J. Nanosci. Nanotechnol. 10(6), 3739–3758 (2010)
Gogotsi, Y.G., Yoshimura, M.: Nature 367, 628 (1994)
Gogotsi, Y., Libera, J.A., Yoshimura, M.: Hydrothermal synthesis of multiwall carbon nanotubes. J. Mater. Res. 15(12), 2591–2594 (2000). https://doi.org/10.1557/jmr.2000.0370
Calderon Moreno, J.M., Yoshimura, M.: Hydrothermal processing of high-quality multiwall nanotubes from amorphous carbon. J. Am. Chem. Soc. 123(4), 741–742 (2001). https://doi.org/10.1021/ja003008h
Gas-phase production of single-walled carbon nanotubes from carbon monoxide: a review of the hipco process. J. Nanosci. Nanotechnol. 4(4), 307–316. https://doi.org/10.1166/jnn.2004.066
Thess, A., Lee, R., Nikolaev, P., Dai, H., Petit, P., Robert, J., Xu, C., Lee, Y.H., Kim, S.G., Rinzler, A.G., Colbert, D.T., Scuseria, G.E., Tomanék, D., Fischer, J.E., Smalley, R.E.: Science 273(1996) 483
Tang, Z.K., Zhang, L., Wang, N., Zhang, X.X., Wen, G.H., Li, G.D.: Science 292, 2462 (2001)
Ago, H., Obshima, S., Uchida, K., Yumura, M.: J Phys Chem B 105, 10453 (2001)
Fan, S., Liang, W., Dang, H., Franklin, N., Tombler, T., Chapline, M.: Phys E: LowDimensional Syst. Nanostruct. 8(2), 179 (2000)
Ebbesen, T.W., Ajayan, P.M., Hiura, H., Tanigaki, K.: Purification of nanotubes. Nature 367(6463), 519 (1994)
Montoro, L.A., Rosolen, J.M.: A multi-step treatment to effective purification of single-walled carbon nanotubes. Carbon 44(15), 3293–3301 (2006)
Ye, X.R., Chen, L.H., Wang, C., Aubuchon, J.F., Chen, I.C., Gapin, A.I., et al.: Electrochemical modification of vertically aligned carbon nanotube arrays. J. Phys. Chem. B 110(26), 12938–12942 (2006)
Sato, Y., Ogawa, T., Motomiya, K., Shinoda, K., Jeyadevan, B., Tohji, K., et al.: Purification of MWCNTs combining wet grinding, hydrothermal treatment, and oxidation. J. Phys. Chem. B 105(17), 3387–3392 (2001)
Yu, A.P., Bekyarova, E., Itkis, M.E., Fakhrutdinov, D., Webster, R., Haddon, R.C.: Application of centrifugation to the large-scale purification of electric arc-produced single-walled carbon nanotubes. J. Am. Chem. Soc. 128(30), 9902–9908 (2006)
Thien-Nga, L., Hernadi, K., Ljubovic, E., Garaj, S., Forro, L.: Mechanical purification of single-walled carbon nanotube bundles from catalytic particles. Nano Lett. 2(12), 1349–1352 (2002)
Coleman, J.N., Dalton, A.B., Curran, S., et al.: Phase separation of carbon nanotubes and turbostratic graphite using a functional organic polymer. Adv. Mater. 12(2), 213–216 (2000)
Dalton, A.B., Stephan, C., Coleman, J.N., et al.: Selective interaction of a semiconjugated organic polymer with single-wall nanotubes. J. Phys. Chem. B 104(43), 10012–10016 (2000)
Moore, V.C., Strano, M.S., Haroz, E.H., et al.: Individually suspended single-walled carbon nanotubes in various surfactants. Nano Lett. 3(10), 1379–1382 (2003)
Jeon, I.-Y., Chang, D., Nanjundan, A.K., Baek, J.-B.: Functionalization of Carbon Nanotubes (2011). https://doi.org/10.5772/18396
Sun, Y.-P., Fu, K., Lin, Y., Huang, W.: Functionalized Carbon Nanotubes: Properties and Applications. Acc. Chem. Res. 35(12), 1096–1104 (2002). https://doi.org/10.1021/ar010160v
Le, Van, Ngo, Cao, Le, Quoc, Tung, Ngo Trinh, Nguyễn, Nghĩa, Vu, Minh: Surface modification and functionalization of carbon nanotube with some organic compounds. Adv. Nat. Sci.: Nanosci. Nanotechnol. 4, 035017 (2013). https://doi.org/10.1088/2043-6262/4/3/035017
Wang, X., Zhou, Z., Chen, F.: Surface modification of carbon nanotubes with an enhanced antifungal activity for the control of plant fungal pathogen. Materials (Basel, Switzerland) 10(12), 1375 (2017). https://doi.org/10.3390/ma10121375
Price, B., Hudson, Jared, Tour, James: Green chemical functionalization of single-walled carbon nanotubes in ionic liquids. J. Am. Chem. Soc. 127, 14867–14870 (2005). https://doi.org/10.1021/ja053998c
Yang, Y.-K.,Qiu, S., He, C., He, W., Yu, L., Xie, X.: Green chemical functionalization of multi-walled carbon nanotubes with poly(ε-caprolactone) in ionic liquids. Appl. Surf. Sci. 257, 1010–1014 (2010). https://doi.org/10.1016/j.apsusc.2010.08.009
Zhou, Y., Fang, Y., Ramasamy, R.P.: Non-covalent functionalization of carbon nanotubes for electrochemical biosensor development. Sensors (Basel, Switzerland) 19(2), 392 (2019). https://doi.org/10.3390/s19020392
Hu, C.-Y., Xu, Y.-J., Duo, S.-W., Zhang, R.-F., Li, M.-S.: Non-covalent functionalization of carbon nanotubes with surfactants and polymers. J. Chin. Chem. Soc. 56(2), 234–239 (2009). https://doi.org/10.1002/jccs.200900033
Zhao, Y.-L., Stoddart, J.F.: Non-covalent functionalization of single-walled carbon nanotubes. Acc. Chem. Res. 42(8), 1161–1171 (2009). https://doi.org/10.1021/ar900056z
Azarniya, A., Safavi, M., Sovizi, S., Azarniya, A., Chen, B., Hosseini, M., Reza, H., Ramakrishna, S.: Metallurgical challenges in carbon nanotube-reinforced metal matrix nanocomposites. Metals 7, 384 (2017). https://doi.org/10.3390/met7100384
Eatemadi, A., Daraee, H., Karimkhanloo, H., Kouhi, M., Zarghami, N., Akbarzadeh, A., Abasi, M., Hanifehpour, Y., Joo, S.W.: Carbon nanotubes: properties, synthesis, purification, and medical applications. Nanoscale Res. Lett. 9(1), 393 (2014). https://doi.org/10.1186/1556-276X-9-393
Zuoli, H., Zhou, G., Byun, J.-H., Lee, S.K., Um, M.-K., Park, B., Chou, T.-W.: Highly stretchable multi-walled carbon nanotube/thermoplastic polyurethane composite fibers for ultrasensitive, wearable strain sensors. Nanoscale 11, 5884–5890 (2019)
Fang, C., Yang, R., Zhang, Z., Zhou, X., Lei, W., Cheng, Y., Wang, D.: Effect of multi-walled carbon nanotubes on the physical properties and crystallisation of recycled PET/TPU composites. RSC Adv. 8(16), 8920–8928 (2018)
Lepak-Kuc, S., Podsiadły, B., Skalski, A., Janczak, D., Jakubowska, M., Lekawa-Raus, A.: Highly conductive carbon nanotube-thermoplastic polyurethane nanocomposite for smart clothing applications and beyond. Nanomaterials 9(9), 1287 (2019)
Sun, W.-J., Xu, L., Jia, L.-C., Zhou, C.-G., Xiang, Y., Yin, R.-H., Li, Z.-M.: Highly conductive and stretchable carbon nanotube/thermoplastic polyurethane composite for wearable heater. Compos. Sci. Technol. 107695 (2019)
Tran, L., Kim, J.: A comparative study of the thermoplastic polyurethane/carbon nanotube and natural rubber/carbon nanotube composites according to their mechanical and electrical properties. Fibers Polym. 19(9), 1948–1955 (2018)
Kanbur, Y., Tayfun, U.: Investigating mechanical, thermal, and flammability properties of thermoplastic polyurethane/carbon nanotube composites. J. Thermoplast. Compos. Mater. 31(12), 1661–1675 (2018)
Wallace, P.R.: The band theory of graphite. Phys. Rev. 71(9), 622–634 (1947)
A. Geim, This Month in Physics History: October 22, 2004: Discovery of Graphene, APS News, 2009
Gogotsi, Y., Presser, V.: Carbon Nanomaterials, 2nd edn, Taylor & Francis (2013)
Rodrigo, D., Limaj, O., Janner, D., Etezadi, D., de Abajo, F.J.G., Pruneri, V., Altug, H.: Mid-infrared plasmonic biosensing with graphene. Science 349(6244), 165–168 (2015)
Banhart, F., Kotakoski, J., Krasheninnikov, A.V.: Structural defects in graphene. ACS Nano 5(1), 26–41 (2011)
Stadler, J., Schmid, T., Zenobi, R.: Nanoscale chemical imaging of single-layer graphene. ACS Nano 5(10), 8442–8448 (2011)
Kim, D.W., Kim, Y.H., Jeong, H.S., Jung, H.T.: Direct visualization of large-area graphene domains and boundaries by optical birefringency. Nat. Nanotechnol. 7(1), 29–34 (2012)
Nair, R.R., Blake, P., Grigorenko, A.N., Novoselov, K.S., Booth, T.J., Stauber, T., Peres, N.M.R., Geim, A.K.: Fine structure constant defines visual transparency of graphene. Science 320(5881), 1308 (2008)
Wang, W.D., Shen, C.L., Li, S., Min, J.J., Yi, C.L.: Mechanical properties of single layer graphene nanoribbons through bending experimental simulations. AIP Adv. 4(3) (2014)
Stolyarova, E., Rim, K.T., Ryu, S.M., et al.: High-resolution scanning tunneling microscopy imaging of mesoscopic graphene sheets on an insulating surface. Proc. Natl. Acad. Sci. U.S.A. 104(22), 9209–9212 (2007)
Novoselov, K.S., Geim, A.K., Morozov, S.V., et al.: Two-dimensional gas of massless dirac fermions in graphene. Nature 438(7065), 197–200 (2005)
Zhang, Y.B., Tan, Y.W., Stormer, H.L., et al.: Experimental observation of the quantum hall effect and berry’s phase in graphene. Nature 438(7065), 201–204 (2005)
Berger, C., Song, Z.M., Li, T.B., et al.: Ultrathin epitaxial graphite: 2D electron gas properties and a route toward graphene-based nanoelectronics. J. Phys. Chem. B 108(52), 19912–19916 (2004)
Son, Y.W., Cohen, M.L., Louie, S.G.: Energy gaps in graphene nanoribbons. Phys. Rev. Lett. 97(21), 216803 (2006)
Bolotin, K.I., Sikes, K.J., Jiang, Z., et al.: Ultrahigh electron mobility in suspended graphene. Solid State Commun. 146 (9–10) 351–355 (2008)
Son, Y.W., Cohen, M.L., Louie, S.G.: Half-metallic graphene nanoribbons. Nature 444(7117), 347–349 (2006)
Lee, C., Wei, X., Kysar, J.W., et al.: Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science 321(5887), 385–388 (2008)
Balandin, A.A., Ghosh, S., Bao, W.Z., et al.: Superior thermal conductivity of single-layer graphene. Nano Lett. 8(3), 902–907 (2008)
Lu, X., Yu, M., Huang, H., Ruoff, R.S.: Tailoring graphite with the goal of achieving single sheets. Nanotechnology 10, 269–272 (1999)
Lang, B.: A LEED Study of the deposition of carbon on platinum crystal surfaces. Surf. Sci. 53, 317–329 (1975)
Liang, X., et al.: Electrostatic force assisted exfoliation of prepatterned few-layer graphenes into device sites. Nano Lett. 9, 467–472 (2009)
Rao, C.N.R., Sood, A.K.: Graphene: Synthesis, Properties, and Phenomena. Wiley, Weinheim, Germany (2013)
Viculis, L.M., Mack, J.J., Mayer, O.M., Hahn, H.T., Kaner, R.B.: Intercalation and exfoliation routes to graphite nanoplatelets. J. Mater. Chem. 15, 974–978 (2005)
Staudenmaier, L.: VerfahrenzurDarstellung der Graphitsäure. Berichte der DeutschenChemischen Gesellschaft 31, 1481–1487 (1898)
Hummers, W.S., Offeman, R.E.: Preparation of graphitic oxide. J. Am. Chem. Soc. 80, 1339 (1958)
Eda, G., Lin, Y.-Y., Miller, S., Chen, C.-W., Su, W.-F., Chhowalla, M.: Transparent and conducting electrodes for organic electronics from reduced graphene oxide. Appl. Phys. Lett. 92 (2008)
Shin, H.-J., et al.: Efficient reduction of graphite oxide by sodium borohydride and its effect on electrical conductance. Adv. Func. Mater. 19, 1987–1992 (2009)
Zhou, X., Zhang, J., Wu, H., Yang, H., Zhang, J., Guo, S.: Reducing graphene oxide via hydroxylamine: a simple and efficient route to graphene. J. Phys. Chem. C 115, 11957–11961 (2011)
https://www.hielscher.com/ultrasonic-graphene-preparation.htm. Accessed on 30-04-2020
Liu, F., Wang, C., Sui, X., et al.: Synthesis of graphene materials by electrochemical exfoliation: recent progress and future potential. Carbon Energy 1, 173–199 (2019). https://doi.org/10.1002/cey2.14
Achee, T.C., Sun, W., Hope, J.T., et al.: High-yield scalable graphene nanosheet production from compressed graphite using electrochemical exfoliation. Sci. Rep. 8, 14525 (2018). https://doi.org/10.1038/s41598-018-32741-3
Behabtu, N., Lomeda, J., Green, M., Higginbotham, A., Sinitskii, A., Kosynkin, D., Tsentalovich, D., Parra-V.A., Schmidt, J., Kesselman, E., Cohen, Y., Talmon, Y., Tour, J., Pasquali, M.: Spontaneous high-concentration dispersions and liquid crystals of graphene. Nat. Nanotechnol. 5, 406–411 (2010). https://doi.org/10.1038/nnano.2010.86
Lu, W., Liu, S., Qin, X., Wang, L., Tian, J., Luo, Y., … Sun, X.: High-yield, large-scale production of few-layer graphene flakes within seconds: using chlorosulfonic acid and H2O2 as exfoliating agents. J. Mater. Chem. 22(18), 8775 (2012). https://doi.org/10.1039/c2jm16741g
Cai, M., Thorpe, D., Adamson, D.H., Schniepp, H.C.: Methods of graphite exfoliation. J. Mater. Chem. 22(48), 24992 (2012). https://doi.org/10.1039/c2jm34517j
Mtibe, A., Mokhothu, T.H., John, M.J., Mokhena, T.C., Mochane, M.J.: Fabrication and characterization of various engineered nanomaterials. Handb. Nanomater. Ind. Appl. 151–171 (2018). https://doi.org/10.1016/b978-0-12-813351-4.00009-2
Marcano, D.C., et al.: Improved synthesis of graphene oxide. ACS Nano 4, 4806–4814 (2010)
Choucair, M., Thordarson, P., Stride, J.A.: Gram-scale production of graphene based on solvothermal synthesis and sonication. Nat. Nanotechnol. 4, 30–33 (2009)
Van Bommel, A.J., Crombeen, J.E., Van Tooren, A.: LEED and auger electron observations of the SiC(0001) surface. Surf. Sci. 48, 463–472 (1975)
Juang, Z.-Y., et al.: Synthesis of graphene on silicon carbide substrates at low temperature. Carbon 47, 2026–2031 (2009)
Eizenberg, M., Blakely, J.M.: Carbon monolayer phase condensation on Ni(111). Surf. Sci. 82, 228–236 (1979)
Somani, P.R., Somani, S.P., Umeno, M.: Planer nano-graphenes from camphor by CVD. Chem. Phys. Lett. 430, 56–59 (2006)
Li, X., et al.: Large-area synthesis of high-quality and uniform graphene films on copper foils. Science 324, 1312–1314 (2009)
Obraztsov, A.N., Zolotukhin, A.A., Ustinov, A.O., Volkov, A.P., Svirko, Y., Jefimovs, K.: DC discharge plasma studies for nanostructured carbon CVD. Diam. Relat. Mater. 12, 917–920 (2003)
Wang, J.J., et al.: Free-standing subnanometer graphite sheets. Appl. Phys. Lett. 85, 1265–1267 (2004)
Wu, X., Liu, Y., Yang, H., Shi, Z.: Large-scale Synthesis of high-quality graphene sheets by an improved alternating current arc-discharge method. RSC Advances 6(95), 93119–93124 (2016). https://doi.org/10.1039/c6ra22273k
Li, N., Wang, Z., Shi, Z.: Synthesis of graphenes with arc-discharge method (2011). https://doi.org/10.5772/14961
Kosynkin, D., Higginbotham, A., Sinitskii, A., Lomeda, J., Dimiev, A., Rice, B., Tour, J.: Longitudinal Unzipping of Carbon Nanotubes to Form Graphene Nanoribbons. Nature 458, 872–876 (2009). https://doi.org/10.1038/nature07872
Kosynkin, D., Higginbotham, A., Sinitskii, A., et al.: Longitudinal unzipping of carbon nanotubes to form graphene nanoribbons. Nature 458, 872–876 (2009)
Panchakarla, L.S., et al.: Synthesis, structure, and properties of boron- and nitrogen-doped graphene. Adv. Mater. 21, 4726–4730 (2009)
Ci, L., et al.: Atomic layers of hybridized boron nitride and graphene domains. Nat. Mater. 9, 430–435 (2010)
235. Aïssa, B., Memon, N., Ali, A., Khraisheh, M.: Recent progress in the growth and applications of graphene as a smart material: a review. Front. Mater. 2 (2015). https://doi.org/10.3389/fmats.2015.00058
236. Jeon, H., Kim, Y., Yu, W.-R., Lee, J.: Exfoliated graphene/thermoplastic elastomer nanocomposites with improved wear properties for 3D printing. Compos. Part B: Eng. 189, 107912 (2020). https://doi.org/10.1016/j.compositesb.2020.107912
237. Osicka, J., Mrlik, M., Ilcikova, M., Krupa, I., Sobolčiak, P., Plachý, T., Mosnáček, J.: Controllably coated graphene oxide particles with enhanced compatibility with poly(ethylene-co-propylene) thermoplastic elastomer for excellent photo-mechanical actuation capability. Reactive Function. Polym. 104487 (2020). https://doi.org/10.1016/j.reactfunctpolym.2020.104487
238. Loomis, J., King, B., Burkhead, T., Xu, P., Bessler, N., Terentjev, E., Panchapakesan, B.: Graphene-nanoplatelet-based photomechanical actuators. Nanotechnology 23(4), 045501 (2012)
239. Liu, M., Kinloch, I.A., Young, R.J., Papageorgiou, D.G.: Modelling mechanical percolation in graphene-reinforced elastomer nanocomposites. Compos. Part B: Eng. 107506 (2019). https://doi.org/10.1016/j.compositesb.2019.107506
Chen, W., Yan, L., Bangal, P.R.: Chemical reduction of graphene oxide to graphene by sulfur-containing compounds. J. Phys. Chem. C 114(47), 19885–19890 (2010). https://doi.org/10.1021/jp107131v
Sachyani Keneth, E., Scalet, G., Layani, M., Tibi, G., Degani, A., Auricchio, F., Magdassi, S.: Soft robotics. 123–129 (2020). https://doi.org/10.1089/soro.2018.0159
Walter, M., Friess, F., Krus, M., Zolanvari, SMH., Grün, G., Kröber, H., Pretsch, T.: Shape memory polymer foam with programmable apertures. Polym (Basel). 12(9), E1914, PMID: 32854329 (2020). https://doi.org/10.3390/polym12091914
Papageorgiou, D.G., Li, Z., Liu, M., Kinloch, I.A., Young, R.J. Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites. Nanoscale 12(4), 2228–2267 (2020)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Bandyopadhyay, A., Dasgupta, P., Basak, S. (2020). Anisotropic Nanofillers in TPE. In: Engineering of Thermoplastic Elastomer with Graphene and Other Anisotropic Nanofillers. Engineering Materials. Springer, Singapore. https://doi.org/10.1007/978-981-15-9085-6_2
Download citation
DOI: https://doi.org/10.1007/978-981-15-9085-6_2
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-9084-9
Online ISBN: 978-981-15-9085-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)