Abstract
A systematic programme of synthesis, characterisation and solubility testing of solids precipitated from solutions containing various ratios of Fe3+, ASO4 3- and SO4 2- has enabled the relative stabilities of the various arsenical phases to be assessed empirically.
Over 90% of the arsenic can be precipitated from solutions of pH<l, Fe:As ≥1, at temperatures above 150°C; the solids formed are crystalline and usually consist of well-defined compounds or mixtures of compounds. While the crystallinities of the precipitates increase with temperature of synthesis, their stabilities do not always increase correspondingly due to the formation of different suites of compounds. The arsenical compounds formed include scorodite and two unknown compounds that have been designated Type-1 (Fe2(HAsO4)3-zH2O) and Type-2 (Fe4(As04)3(OH)x(SO4)y). Crystalline ferrihydrite can also be formed from solutions containing high concentrations of iron and this can readily incorporate substantial amounts of arsenic.
The relative order of stability (based on arsenic solubility) of the compounds synthesised at elevated temperatures is: Type-2 003D; Scorodite > Arsenical Ferrihydrite > Type-1. When a comparison is made of the stability of these high temperature crystalline solids with amorphous iron arsenates (Fe:As >3: 1) precipitated at ambient temperature and at pH 5, the crystalline solids are marginally less stable. However, the crystalline compounds contain considerably more arsenic (∼Fe:As 1: 1) than the amorphous precipitates (Fe:As >3: 1). These latter compounds consist mainly of amorphous ferrihydrite which on ageing can dehydrate and recrystallise and may release adsorbed arsenic due to reductions in surface area and active sites. Therefore the formation of stable crystalline compounds may be a more attractive disposal option for arsenic.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Robins R.G. and Haung J.C.Y. (1988) The Adsorption of Arsenate Ion by Ferric Hydroxide, in Reddy R.G. et al., eds, Arsenic Metallurgy: Fundamentals and Application, Proceedings of an International Symposium. Phoenix, Arizona, TMS-AIME, 99–112
Waychunas G.A., Rea B.A., Fuller C.C. and Davis J.A. (1993) Surface Chemistry of Ferrihydrite: Part 1. EXAFS Studies of the Geometry of Coprecipitated and Adsorbed Arsenates. Geo. Cosmo. Acta. 57, 2251–2269
Robins R.G., Wong P.L.M., Nishimura T., Khoe G.H. and Huang J.G.N. (1991) Basic Ferric Arsenates — Non-existent, in Cairns′91. Proceedings of the Randol Forum, Cairns, Australia, 197–200
Nishimura T., Itoh C.T. and Tozawa K. (1988) Stabilities and Solubilities of Metal Arsenites and Arsenates in Water and the Effect of Sulphate and Carbonate Ions on their Solubility, Cairns′91. Proceedings of the Randol Forum, Cairns 1, 77–98
Harris G.B. and Krause E. (1993) The Disposal of Arsenic from Metallurgical Processes: its Status Regarding Ferric Arsenate, in Reddy R.G. and Weisenbach R. eds, The Paul E. Queneau International Symposium on Extractive Metallurgy of Nickel, Cobalt and Associated Metals, Vol. 1, Fundamental aspects. TMS, Warrendale, 1221–1237
Ugarte F.J.G. and Monhemius A.J. (1992) Characterisation of High-Temperature Arsenic-Containing Residues from Hydrometallurgical Processes, Hydrometallurgy, 30, 69–86
Carageorgos T. (1993) Acid Pressure Oxidation of Arsenopyrite, PhD Thesis, Imperial College, London
Swash P.M. and Monhemius A.J. (1994) The Dehydration of Arsenical Ferrihydrite: Implications for its Long Term Stability, (in preparation)
Schwertmann U. and Cornell R.M. (1991) Iron Oxides in the Laboratory: Preparation and Characterisation. Weinham; Basel, VCH
van Aswegen P.C., Godfrey M.W., Miller D. M. and Haines A.K.(1991) Developments and Innovations in Bacterial Oxidation of Refractory Ores, Minerals and Met. Proc. 8(4), 188–191
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1994 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Swash, P.M., Monhemius, A.J. (1994). Hydrothermal precipitation from aqueous solutions containing iron(III), arsenate and sulphate. In: Hydrometallurgy ’94. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-1214-7_10
Download citation
DOI: https://doi.org/10.1007/978-94-011-1214-7_10
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4532-2
Online ISBN: 978-94-011-1214-7
eBook Packages: Springer Book Archive