Abstract
Particulate-filled polypropylene (PP) has been used in large quantities in numerous fields of applications for many years. Figure 1.1 shows not only the most important applications, but also the obviously high growth rate of these materials [1]. The success of particulate-filled PP lies in its extremely advantageous price/volume/performance relations [2–5], with the result that PP composites successfully penetrate fields traditionally occupied by other materials such as ABS [6, 7]. Considerable efforts have been made to extend their application to fields where engineering thermoplastics have been used exclusively up to now [8, 9].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Schlumpf, H.-P. (1990) Modern aspects of fillers in polypropylene, presented at the 10th International Macromolecule Symposium, 20–21 September, Interlaken, Switzerland.
Vink, D. (1990) Kunststoffe, 80, 842–6.
Aumayr, G. (1989) Kunststoffberater, 34, 63–6.
Schlumpf, H.-P. and Bilogan, W. (1981) Kunststoffe, 71, 820–3.
Schlumpf, H.-P. (1983) Kunststoffe, 73, 511–15.
Schmidt, H. and Jzquierdo, R. (1988) Kunststoff, 78, 149–50.
Malpass, V. and Kempthorn, J. (1989) Plastics Compounding, 12, 52.
Malpass, V. and Kempthorn, J. (1989) Plastics Compounding, 12, 55–6.
Malpass, V. and Kempthorn, J. (1989) Plastics Compounding, 12, 58–61.
Bezard, D. (1986) Oesterreichische Kunststoff Zeitschrift, 17, 174.
Aumayr, G. and Neiβl, W. (1987) Oesterreichische Kunststoff Zeitschrift, 18, 121–2.
Aumayr, G. and Neiβl, W. (1987) Oesterreichische Kunststoff Zeitschrift, 18, 124.
Stadterman, R. L. and Willis, A. J. (1988) TAPPI Journal, 71, 145–6.
Bihlmayer, G. A., Aumayr, G. and Mautner, F. (1988) Plaste und Kautschuk, 35, 185–9.
Domininghaus, H. (1984) Gummi, Asbest, Kunststoffe, 37, 326–30.
Bertelli, G., Camino, G., Marchetti, E. et al. (1989) Polymer Degradation and Stability, 25, 277–92.
Acosta, J. L., Rodriguez, M., Linares, A. and Jurado, J. R. (1990) Polymer Bulletin, 24, 87–91.
Bricteux, J. and Michaux, C. (1971) Propriétés et caractéristiques des charges inorganiques, Bulletin Technique ‘Polymères’, No. 1, Institut National des Industries Extractives, Liège, Belgium.
Samuels, R. J. (1974) Structured Polymer Properties, Wiley, New York.
Greco, R. and Coppola, F. (1986) Plastics and Rubber Processing and Applications, 6, 35–41.
Wright, D. G. M., Dunk, R., Bouvart, D. and Autran, M. (1988) Polymer, 29, 793–8.
Trotignon, J. P. and Verdu, J. (1987) Journal of Applied Polymer Science, 34, 1–18.
Fujiyama, M., Wakino, T. and Kawasaki, Y. (1988) Journal of Applied Polymer Science, 35, 29–49.
Fujiyama, M. and Wakino, T. (1991) Journal of Applied Polymer Science, 42, 2749–60.
Singh, P. and Kamal, M. R. (1989) Polymer Composites, 10, 344–51.
Menges, G., Troost, A., Koske, J. et al. (1988) Kunststoffe, 78, 806–9.
Karger-Kocsis, J. and Friedrich, K. (1989) International Journal of Fatigue, 11, 161–8.
Murphy, M. W., Thomas, K. and Bevis, M. J. (1987) Plastics and Rubber Processing and Applications, 7, 241–2.
Murphy, M. W., Thomas, K. and Bevis, M. J. (1988) Plastics and Rubber Processing and Applications, 9, 3–16.
Trotignon, J. P. and Verdu, J. (1987) Journal of Applied Polymer Science, 34, 19–36.
Bartosiewicz, L. and Kelly, C. J. (1987) Advances in Polymer Technology, 7, 21–33.
Riley, A. M., Paynter, C. D., McGenity, P. M. and Adams, J. M. (1990) Plastic and Rubber Processing and Applications, 14, 85–93.
Menczel, J. and Varga, J. (1983) Journal of Thermal Analysis, 28, 161–74.
Fujiyama, M. and Wakino, T. (1991) Journal of Applied Polymer Science, 42, 2739–47.
Varga, J. Kémiai Közlemények, 71, 285–309 (Hungarian).
Varga, J. and Schulek-Tóth, F. (1991) Angewandte Makromolekulare Chemie, 188, 11–25.
Varga, J. (1989) Journal of Thermal Analysis, 35, 1891–1912.
Kowalewski, T. and Galeski, A. (1986) Journal of Applied Polymer Science, 32, 2919–34.
Ribnikář, F. (1991) Journal of Applied Polymer Science, 42, 2727–37.
Garton, A., Kim, S. W. and Wiles, D. M. (1982) Journal of Polymer Science, Polymer Letters, 20, 273–8.
Zuchowska, D. and Hlavatá D. (1991) European Polymer Journal, 27, 355–7.
Bajaj, P., Jha, N. K., Maurya, P. L. and Misra, A. C. (1987) Journal of Applied Polymer Science, 34, 1785–1801.
Yue, C. Y. and Cheung, W. L. (1991) Journal of Materials Science, 26, 870–80.
Xavier, S. F. and Sharma, Y. N. (1984) Angewandte Makromolekulare Chemie, 127, 145–52.
Varga, J. (1991) Journal of Polymer Engineering, 1, 231–51.
Folkes, M. J. and Wong, W. K. (1987) Polymer, 28, 1309–14.
Folkes, M. J. and Hardwick, S. T. (1987) Journal of Materials Science Letters, 6, 656–8.
Burton, R. H., Day, T. M. and Folkes, M. J. (1984) Polymer Communications, 25, 361–2.
Huson, M. G. and McGill, W. J. (1984) Journal of Polymer Science, Polymer Chemistry, 22, 3571–80.
Kendall, K. (1978) British Polymer Journal, 10, 35–8.
Maiti, S. N. and Mahapatro, P. K. (1989) Journal of Applied Polymer Science, 37, 1889–9.
Maiti, S. N. and Mahapatro, P. K. (1990) International Journal of Polymeric Materials, 14, 205–222.
Hutley, T. J. and Darlington, M. W. (1984) Polymer Communications, 25, 226–8.
Hutley, T. J. and Darlington, M. W. (1985) Polymer Communications, 26, 264–7.
Schlumpf, H.-P. (1990) Chimia, 44, 359–60.
Golovoy, A. (1986) Polymer Composites, 7, 405–12.
Voelker, M. J. (1991) Polymer Composites, 12, 119–21.
Vollenberg, P. H. T. and Heikens, D. (1986) The effects of particle size on the mechanical properties of composites, in Composite Interfaces, (eds H. Ishida and J. L. Koenig), Elsevier, New York, pp. 171–5.
Ramsteiner, F. and Theysohn, R. (1984) Composites, 15, 121–8.
Morales, E. and White, J. R. (1988) Journal of Materials Science, 23, 3612–22.
Arroyo, M., Iglesias, A. and Perez, F. (1985) Journal of Applied Polymer Science, 30, 2475–83.
Miyata, S., Imahashi, T. and Aabuki, H. (1980) Journal of Applied Polymer Science, 25, 415–25.
Hornsby, P. R. and Watson, C. L. (1989) Plastic and Rubber Processing and Applications, 11, 45–51.
Törmälä, P., Pääkkonen, E. and Laiho, J. (1985) Kunststoffe, 75, 287–90.
Socha, D. A. (1989) Calcium sulfate — the performance additive, in Filplas Conference, 12–13 April, Manchester, UK.
Sumita, M., Sakata, K., Asai, S. et al. (1991) Polymer Bulletin, 25, 265–71.
Bigg, D. M. (1987) Polymer Composites, 8, 115–22.
Bridge, B., Folkes, M. J. and Jahankhani, H. (1988) Journal of Materials Science, 23, 1948–54.
Nagy, T. T, Vámos, Gy., Tóth, A. et al. (1984) Müanyag és Gumi, 21, 48–52 (Hungarian).
Ishida, H. and Miller, J. D. (1984) Macromolecules, 17, 1659–66.
Chen, L.-S., Mai, Y.-W. and Cotterell, B. (1989) Polymer Engineering and Science, 29, 505–12.
Mitsuishi, K., Kodama, S. and Kawasaki, H. (1985) Polymer Engineering and Science, 25, 1069–73.
Michler, G. H. and Tovmasjan, J. M. (1988) Plaste und Kautschuk, 35, 73–7.
Nielsen, L. E. (1974) Mechanical Properties of Polymers and Composites, Marcel Dekker, New York.
Suetsugu, Y., Kikutani, T., Kyu, T. and White, J. L. (1990) Colloid and Polymer Science, 268, 118–31.
Suetsugu, Y. and White, J. L. (1987) Advances in Polymer Technology, 7,427–49.
Svehlova, V. and Poloucek, E. (1987) Angewandte Makromolekulare Chemie, 153, 197–200.
Pukánszky, B., Turcsányi, B. and Tüdős, F. (1988) Effect of interfacial interaction on the tensile yield stress of polymer composites, in Interfaces in Polymer, Ceramic, and Metal Matrix Composites (ed. H. Ishida), Elsevier, New York, pp. 467–77.
Pukánszky, B. (1990) Composites, 21, 255–62.
Busigin, C., Lahtinen, R., Martinez, G. M. et al. (1984) Polymer Engineering and Science, 24, 169–74.
Parrinello, L. M. (1991) TAPPI Journal, 74, 85–8.
Vu-Khanh, T. and Fisa, B. (1986) Polymer Composites, 7, 219–26.
Trotignon, J. P., Verdu, J., De Boissard, R. and De Vallois, A. (1986) Polypropylene-mica composites, in Polymer Composites (ed. B. Sedláček), Walter de Gruyter, Berlin, pp. 191–8.
Pukánszky, B., Fekete, E. and Tüdős, F. (1989) Makromolekulare Chemie, Macromolecular Symposia, 28, 165–86.
Okuno, K. and Woodhams, R. T. (1975) Polymer Engineering and Science, 15, 308–15.
Pukánszky, B., Tüdős, F., Jančař, J. and Kolařík, J. (1989) Journal of Materials Science Letters, 8, 1040–42.
Stoklasa, K., Tomis, F. and Navratil, Z. (1985) Thermochimica Acta, 93, 221–4.
Kerch, G. M. and Irgens, L. (1985) Thermochimica Acta, 93, 155–7.
Bridge, B., Folkes, M. J. and Jahankhani, H. (1989) Journal of Materials Science, 24, 1479–85.
Goodier, J. N. (1933) Journal of Applied Mechanics, 55, 39–44.
Kowalewski, T., Galeski, A. and Kryszewski, M. (1984) The structure and tensile properties of cold drawn modified chalk filled polypropylene, in Polymer Blends. Processing, Morphology and Properties (eds M. Kryszewski, A. Galeski and E. Martuscelli), Plenum Press, New York, pp. 223–41.
Nakagawa, H. and Sano, H. (1985) Polymer Preprints, 26, 249–50.
Maiti, S. N. and Mahapatro, P. K. (1991) Journal of Applied Polymer Science, 42, 3101–10.
Trantina, G. G. (1984) Polymer Engineering and Science, 24, 1180–84.
Nicolais, L. and Nicodemo, L. (1974) International Journal of Polymeric Materials, 4, 229–43.
Vollenberg, P. H. T. (1987) The mechanical behaviour of particle filled thermoplastics, PhD Thesis, Eindhoven University of Technology.
van der Sanden, M. C. M. and Heikens, D. (1990) Influence of adhesion on shear band formation around LDPE particles in polycarbonate, presented at the 13th Discussion Conference on the Mechanisms of Polymer Strength and Toughness, 16–19 July, Prague, Czechoslovakia.
Pukánszky, B. and Vörös, Gy. (1993) Composite Interface, 1, 411–27.
Bucknall, C. B. (1977) Toughened Plastics, Applied Science, London.
Nezbedová, E. and Davidovič, I. (1986) Plaste und Kautschuk, 33, 228–30.
Beck, R. H., Gratch, S., Newman, S. and Rausch, K. C. (1968) Journal of Polymer Science, Polymer Letters, 6, 707–9.
Galeski, A. and Kalinski, R. (1980) Polymeric modifier for filled polypropylene, in Polymer Blends. Processing, Morphology and Properties Vol. 1, (eds. E. Martuscelli, R. Palumbo and M. Kryszewski) Plenum Press, New York, pp. 431–49.
Wu, S. (1974) Journal of Macromolecular Science, Reviews in Macromolecular Chemistry, C10, 1–73.
Dekkers, M. E. J. and Heikens, D. (1986) Interfacial effects on local deformation mechanisms in glass bead-filled glassy polymers, in Composite Interfaces (eds H. Ishida and J. L. Koenig), Elsevier, New York, pp. 161–70.
Dekkers, M. E. J. and Heikens, D. (1985) Journal of Materials Science, 20, 3873–80.
Jang, B. Z., Uhlmann, D. R. and Van der Sande, J. B. (1985) Polymer Engineering and Science, 25, 98–104.
Kinloch, A. J. and Young, R. J. (1983) Fracture Behaviour of Polymers, Elsevier, London.
Breuer, H. (1985) Yielding and failure criteria for rubber modified polymers, Part 1, NATO ASI Series, Series E, 89, 375–82.
Breuer, H. (1985) Yielding and failure criteria for rubber modified polymers, Part 2, NATO ASI Series, Series E, 89, 383–92.
Dekkers, M. E. J. and Heikens, D. (1984) Journal of Materials Science, 19, 3271–275.
Vollenberg, P., Heikens, D. and Ladan, H. C. B. (1988) Polymer Composites, 9, 382–8.
Pukánszky, B., van Es, M., Maurer, F. H. J. and Vörös, Gy. (1994) Journal of Materials Science, 29, 2350–8.
Allard, R. C., Vu-Khanh, T. and Chalifoux, J. P. (1989) Polymer Composites, 10, 62–8.
Vu-Khanh, T. and Fisa, B. (1986) Polymer Composites, 1, 375–82.
Sova, M. (1986) Strain rate dependence of deformation behaviour and fracture surface morphology in polypropylene with short glass fibres, in Polymer Composites (ed. B. Sedláček), Walter de Gruyter, Berlin, pp. 507–14.
Vu-Khanh, T., Sanschagrin, B. and Fisa, B. (1985) Polymer Composites, 6, 249–60.
Friedrich, K. and Karsch, U. A. (1983) Fibre Science and Technology, 18, 37–52.
Hoffmann, H., Grellmann, W. and Zilvar, V. (1986) Instrumental impact studies of some thermoplastic composites, in Polymer Composites (ed. B. Sedláček), Walter de Gruyter, Berlin, pp. 233–42.
Nezbedova, E., Ponesicky, J. and Sova, M. (1990) Acta Polymerica, 41, 36–42.
Vollenberg, P. H. T. and Heikens, D. (1989) Polymer, 30, 1656–62.
Maurer, F. H. J, Kosfeld, R., Uhlenbroich, T. and Bosveliev, L. G. (1981) Structure and properties of highly filled high-density polyethylene, in 27th International Symposium on Macromolecules, 6–9 July, Strasbourg, France.
Maurer, F. H. J., Schoffeleers, H. M, Kosfeld, R. and Uhlenbroich, T. (1982) Analysis of polymer-filler interaction in filled polyethylene, in Progress in Science and Engineering of Composites, ICCM-IV (eds T. Hayashi, K. Kawata and S. Umekawa), Tokyo, pp. 803–9.
Akay, G. (1990) Polymer Engineering Science, 30, 1361–72.
Maurer, F. H. J., Kosfeld, R. and Uhlenbroich, Th. (1985) Colloid and Polymer Science, 263, 624–30.
Mansfield, K. F. and Theodorou, D. N. (1991) Macromolecules, 24, 4295–309.
Jančář, J. (1991) Journal of Materials Science, 26, 4123–9.
Zorll, U. (1977) Gummi, Asbest, Kunststoffe, 30, 436–44.
Iisaka, K. and Shibayama, K. (1978) Journal of Applied Polymer Science, 22, 3135–3.
Pukánszky, B. and Tüdős, F. (1990) Indirect determination of interphase thickness from the mechanical properties of particulate filled polymers, in Controlled Interphases in Composite Materials (ed. H. Ishida), Elsevier, New York, pp. 691–700.
Kolařík, J., Hudeček, S. and Lednický F. (1978) Faserforschung und Textiltechnck., 29, 51–6.
Kolařík, J., Hudeček, S., Lednický, F. and Nicolais, L. (1979) Journal of Applied Polymer Science, 23, 1553–64.
Gupta, V. B., Mittal, R. K, Sharma, P. K. et al. (1989) Polymer Composites, 10, 16–27.
Sumita, M., Tsukini, H., Miyasaka, K. and Ishikawa, K. (1984) Journal of Applied Polymer Science, 29, 1523–30.
Turcsányi, B., Pukánszky, B. and Tüdős, F. (1988) Journal of Materials Science Letters, 7, 160–2.
Pukánszky, B. (1992) New Polymer Materials, 3, 205–17.
Felix, J. M. and Gatenholm, P. (1991) Journal of Applied Polymer Science, 42, 609–20.
Nicolais, L. and Nicodemo, L. (1973) Polymer Engineering and Science, 13, 469.
Schreiber, H. P., Wertheimer, M. R. and Lambla, M. (1982) Journal of Applied Polymer Science, 21, 2269–80.
Fowkes, F. M. (1964) Industrial and Engineering Chemistry, 56, 40–52.
Fekete, E., Pukánszky, B., Tóth, A. and Bertóti, I. (1990) Journal of Colloid and Interface Science, 135, 200–8.
Gutowski, W. (1990) Effect of fibre-matrix adhesion on mechanical properties of composites, in Controlled Interphases in Composite Materials (ed. H. Ishida), Elsevier, New York, pp. 505–20.
Huntsberger, J. R. (1981) Journal of Adhesion, 12, 3–12.
Fox, H. W, Hare, E. F. and Zismann, W. A. (1955) Journal of Physical Chemistry, 59, 1097–1106.
Matienzo, L. J. and Shah, T. K. (1980) Surface and Interface Analysis, 8, 53–9.
Raj, R. G., Kokta, B. V. and Daneault, C. (1989) International Journal of Polymer Materials, 12, 239–50.
Monte, S. J. and Sugerman, G. (1990) Journal of Elastomers and Plastics, 22, 83–96.
Jančář, J. and Kučera, J. (1990) Polymer Engineering and Science, 30, 707–13.
Marosi, Gy., Bertalan, Gy., Rusznák, I. and Anna, P. (1986) Colloids and Surfaces, 23, 185–98.
Papirer, E., Schultz, J. and Turchi, C. (1984) European Polymer Journal, 12, 1155–8.
Raj, R. G., Kokta, B. V., Dembele, F. and Sanschagrin, B. (1989) Journal of Applied Polymer Science, 38, 1987–96.
Vollenberg, P. H. T. and Heikens, D. (1990) Journal of Materials Science, 25, 3089–95.
Mäder, E. and Freitag, K.-H. (1990) Composites, 21, 397–402.
Tausz, S. E. and Chaffey, C. E. (1982) Journal of Applied Polymer Science, 27, 4493–500.
Plueddemann, E. P. (1982) Silane Coupling Agents, Plenum Press, New York.
Ishida, H. (1985) Structural gradient in the silane coupling agent layers and its influence on the mechanical and physical properties of composites, in Molecular Characterization of Composite Interfaces (eds H. Ishida and G. Kumar), Plenum Press, New York.
Favis, B. D., Blanchard, L. P, Leonard, J. and Prud’homme, R. E. (1983) Journal of Applied Polymer Science, 28, 1235–44.
Marshall, C. J., Rozett, R. and Kunkle, A. C. (1985) Plastics Compounding, 8, 69–70
Marshall, C. J., Rozett, R. and Kunkle, A. C. (1985) Plastics Compounding, 8, 73–4.
Wright, P. J. (1986) Developments in Plastics Technology, 3, 119–54.
Bajaj, P., Jha, N. K. and Jha, R. K. (1989) Polymer Engineering and Science, 29, 557–63.
Jančař, J., Kummer, M. and Kolařík, J. (1988) Interfacial adhesion and mechanical properties of maleated polypropylene/CaCO3 composites, in Interfaces in Polymer, CeramiC., and Metal Matrix Composites (ed. H. Ishida), Elsevier, New York, pp. 705–11.
Felix, J. M. and Gatenholm, P. (1991) Journal of Applied Polymer Science, 50, 699–708.
Kelnar, I. (1991) Angewandte Makromolekulare Chemie, 189, 207–18.
Chiang, W.-Y. and Yang, W.-D. (1988) Journal of Applied Polymer Science, 35, 807–23.
Jančář, J. and Kučera, J. (1990) Polymer Engineering and Science, 30, 714–20.
Klason, C. and Kubát, J. (1986) Plastics and Rubber Processing and Applications, 6, 17–20.
Ess, J. W. and Hornsby, P. R. Plastics and Rubber Processing and Applications, 8, 147–56.
Tabor, D. (1977) Journal of Colloid and Interface Science, 58, 2–13.
Roberts, A. D. (1979) Rubber Chemistry and Technology, 52, 23–42.
Pukánszky, B., Tüdős, F., Kolařík, J. and Lednickí, F. (1990) Polymer Composites, 11, 98–104.
Goodrich, J. E. and Porter, R. S. (1967) Polymer Engineering and Science, 1, 45–51.
Ess, J. W. and Hornsby, P. R. (1986) Polymer Testing, 6, 205–18.
Krapez, J. C., Cielo, P., Maldague, X. and Utracki, L. A. (1987) Polymer Composites, 8, 396–407.
Bigg, D. M. (1983) Polymer Engineering and Science, 23, 206–10.
Kubát, J. and Szalánczi, Á. (1974) Polymer Engineering and Science, 14, 873.
Utracki, L. A. (1984) The shear and elongational flow of polymer melts containing anisometric filler particles; Part II, Mica-filled polyolefins, in Proceedings of the IX International Congress on Rheology, Mexico, pp. 467–74.
Gupta, V. B., Mittal, R. K. and Sharma, P. K. (1989) Polymer Composites, 10, 8–15.
Kamal, M. R., Song, L. and Singh, P. (1986) Polymer Composites, 1, 323–9.
Sanou, M., Chung, B. and Cohen, C. (1985) Polymer Engineering and Science, 25, 1008–16.
Lisy, F., Hiltner, A. and Baer, E. (1991) Polymer Preprints, 32, 21–2.
Rockenbauer, A., Jókay, L., Pukánszky, B. and Tüdős, F. (1985) Macromolecules, 18, 918–23.
Fujiyama, M. and Wakino, T. (1991) Journal of Applied Polymer Science, 42, 9–20.
Mittal, R. K., Gupta, V. B. and Sharma, P. (1987) Journal of Materials Science, 22, 1949–55.
Christie, M. (1986) Plastics Engineering, 42, 41–5.
Sanschagrin, B., Gauvin, R., Fisa, B. and Vu-Khanh, T. (1987) Plastics Compendivar, 10, 37–38
Sanschagrin, B., Gauvin, R., Fisa, B. and Vu-Khanh, T. (1987) Plastics Compendivar, 10, 40
Sanschagrin, B., Gauvin, R., Fisa, B. and Vu-Khanh, T. (1987) Plastics Compendivar, 10, 42–3
Sanschagrin, B., Gauvin, R., Fisa, B. and Vu-Khanh, T. (1987) Plastics Compendivar, 10, 45
Sanschagrin, B., Gauvin, R., Fisa, B. and Vu-Khanh, T. (1987) Plastics Compendivar, 10, 48.
Fisa, K. B., Dufour, J. and Vu-Khanh, T. Polymer Composites, 8, 408–17.
Vaxman, A. and Narkis, M. (1991) Polymer Composites, 12, 161–8.
Han, C. D. (1974) Journal of Applied Polymer Science, 18, 821–9.
Faulkner, D. L. and Schmidt, L. R. (1977) Polymer Engineering and Science, 17, 657–65.
Stamhuis, J. E. and Loppé, J. P. A. (1982) Rheologica Acta, 21, 103–5.
Jeffrey, D. J. and Acrivos, A. (1976) AICHE Journal, 22, 417–32.
Juskey, V. P. and Chaffey, C. E. (1982) Canadian Journal of Chemical Engineering, 60, 334–41.
Pukánszky, B, Tüdős, F. and Kelen, T. (1986) Polymer Composites, 7, 106–15.
Pukánszky, B. and Tüdős, F. (1988) Estimation of the interfacially bonded polymer in PP composites, in Polymers for Advanced Technologies (ed. M. Lewin), VCH Publishers, New York, pp. 792–807.
Utracki, L. A. (1984) Rubber Chemistry and Technology, 57, 507–22.
Kamal, M. R., Mutel, A. T. and Utracki, L. A. (1984) Polymer Composites, 5, 289–98.
McGee, S. and McCullough, R. L. (1981) Polymer Composites, 2, 149–61.
Dickie, R. A. (1978) Mechanical properties (small deformations) of multiphase polymer blends, in Polymer Blends, Vol. 1, (eds D. R. Paul and S. Newman), Academic Press, New York, pp. 353–91.
Ahmed, S. and Jones, F. R. (1990) Journal of Materials Science, 25, 4933–42.
Christensen, R. M. and Lo, K. H. (1979) Journal of Mechanics and Physics of Solids, 27, 315–30.
Lewis, T. R. and Nielsen, L. E. (1970) Journal of Applied Polymer Science, 14, 1449–71.
Mitsuishi, K., Kawasaki, H. and Kodama, S. (1984) Kobunshi Ronbunshu, 41, 665–72.
Katz, H. S. and Milewski, J. V. (1978) Handbook of Fillers and Reinforcements for Plastics, Van Nostrand, New York.
Chacko, V. P., Karasz, F. E. and Farris, R. J. (1982) Polymer Engineering and Science, 15, 968–74.
Nicolais, L. and Narkis, M. (1971) Polymer Engineering and Science, 11, 194–9.
Ishai, O. and Cohen, L. J. (1968) Journal of Composite Materials, 2, 302–15.
Kokta, B. V., Raj, R. G. and Daneault, C. (1989) Polymer-Plastic Technology and Engineering, 28, 247–59.
Nicolais, L. and Nicodemo, L. (1973) Polymer Engineering and Science, 13, 469.
Bigg, D. M. (1987) Polymer Composites, 8, 115–122.
Kučera, J. (1986) Mechanical properties of polyethylene and polypropylene filled with calcium carbonate, in Polymer Composites (ed. B. Sedláček), Walter de Gruyter, Berlin, pp. 544–52.
Bertelli, G., Marchetti, E., Camino, G. et al. (1989) Angewandte Makromolekulare Chemie, 172, 153–63.
Acosta, J. L., Morales, E., Ojeda, M. C. and Linares, A. (1986) Angewandte Makromolekulare Chemie, 138, 103–10.
Arroyo, M. and Vigo Matheu, J. P. (1988) Polymer Composites, 9, 105–11.
Arroyo, M., Sanchez-Berna, M. and Vigo Matheu, J. P. (1990) Journal of Polymer Engineering, 9, 85–104.
Arroyo, M. and Avalos, F. (1989) Polymer Composites, 10, 117–21.
Arroyo, M. and Avalos, F. (1991) Polymer Composites, 12, 1–6.
Arroyo, M. and Avalos, F. (1991) Polymer Composites, 12, 7–11.
Gupta, A. K. and Gupta, V. B. (1981) Polymer Composites, 2, 149–61.
Karger-Kocsis, J., Kalló, A. and Kuleznev, V. N. (1984) Polymer, 25, 279–86.
Lee, Y.-D. and Lu, C.-C. (1982) Journal of the Chinese Institute of Chemical Engineering, 13, 1–8.
Dao, K. C. and Hatem, R. A. (1984) SPE Technical Papers, 30, 198–204.
Kolařík, J. and Lednický, F. (1986) Structure of polypropylene/EPDM elastomer/calcium carbonate composites, in Polymer Composites (ed. B. Sedláček), Walter de Gruyter, Berlin, pp. 537–44.
Stamhuis, J. E. (1984) Polymer Composites, 5, 202–7.
Stamhuis, J. E. (1988) Polymer Composites, 9, 72–7.
Stamhuis, J. E. (1988) Polymer Composites, 9, 280–4.
Kitamura, H. (1982) Polypropylene composite for instrument panel of motor vehicle, in Proceedings of the 4th International Conference on Composite Materials, ICCM-IV, 25–27 October, Tokyo, Japan.
Kolařík, J., Lednický, F. and Pukánszky, B. (1987) Ternary composites polypropylene/elastomer/filler: structure and elastic properties, in Proceedings of the 6th ICCM/2nd ECCM, Vol. 1 (eds F. L. Matthews, N. C. R. Buskell, J. M. Hodgkinson and J. Morton), Elsevier, London, pp. 452–61.
Pukánszky, B., Tüdős, F., Kolařík, J. and Lednický, F. (1989) Composite Polymers, 2, 491–511.
Kolařík, J., Pukánszky, B. and Lednický F. (1988) Ternary composites polypropylene/elastomer/filler: Phase structure and its control, in Interfaces in Polymer, CeramiC., and Metal Matrix Composites (ed. H. Ishida), Elsevier, New York, pp. 453–62.
Kolařík, J., Lednický, F. and Pukánszky, B. (1990) Composite Polymers, 3, 271–89.
Chiang, W.-Y., Yang, W.-D., and Pukánszky, B. (1992) Polymer Engineering and Science, 32, 641–8.
Kolařík, J., Lednický, F., Jančař, J. and Pukánszky, B. (1990) Polymer Communications, 31, 201–4.
Scott, C. and Ishida, H. (1987) Journal of Materials Science, 22, 3963–73.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1995 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Pukánszky, B. (1995). Particulate filled polypropylene: structure and properties. In: Karger-Kocsis, J. (eds) Polypropylene Structure, blends and Composites. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-0523-1_1
Download citation
DOI: https://doi.org/10.1007/978-94-011-0523-1_1
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4233-8
Online ISBN: 978-94-011-0523-1
eBook Packages: Springer Book Archive