Abstract
This chapter explains the methodology to simulate total hip arthroplasty. Three-dimensional (3D) model of a femur was created from the Visible Human Project computed tomography dataset. Four different models of cementless hip stem were constructed from various file formats. Triangular surface mesh was manually repaired to ensure good finite element model for analyses. The implant surface mesh was then aligned in the femoral canal and the complete arthroplasty model was then converted into solid tetrahedrals. The implant was assigned with linear isotropic properties and the bone was assigned based on their greyscale values. Loads simulating the gait cycle and stair-climbing were used for the simulation. An algorithm to calculate implant-bone relative motion was developed to analyse the interface micromotion. A convergence study was performed and the micromotion algorithm verified.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Keaveny TM, Bartel DL (1993) Effects of porous coating, with and without collar support, on early relative motion for a cementless hip prosthesis. J Biomech 26(12):1355–1368
Sanghera B, Naique S, Papaharilaou Y, Amis A (2001) Preliminary study of rapid prototype medical models. Rapid Prototyping J 7(5):275–284
Zachariah SG, Sanders JE (2000) Finite element estimates of interface stress in the trans-tibial prosthesis using gap elements are different from those using automated contact. J Biomech 33(7):895–899
Hefzy MS, Singh SP (1997) Comparison between two techniques for modeling interface conditions in a porous coated hip endoprosthesis. Med Eng Phys 19(1):50–62
Viceconti M, Muccini R, Bernakiewicz M, Baleani M, Cristofolini L (2000) Large-sliding contact elements accurately predict levels of bone-implant micromotion relevant to osseointegration. J Biomech 33(12):1611–1618
Tissakht M, Eskandari H, Ahmed AM (1995) Micromotion analysis of the fixation of total knee tibial component. Comput Struct 56(2–3):365–375
Ando M, Imura S, Omori H, Okumura Y, Bo A, Baba H (1999) Nonlinear three-dimensional finite element analysis of newly designed cementless total hip stems. Artif Organs 23(4):339–346
Biegler FB, Reuben JD, Harrigan TP, Hou FJ, Akin JE (1995) Effect of porous coating and loading conditions on total hip femoral stem stability. J Arthroplasty 10(6):839–847
Kuiper JH, Huiskes R (1996) Friction and stem stiffness affect dynamic interface motion in total hip replacement. J Orthopaed Res 14(1):36–43
Viceconti M, Monti L, Muccini R, Bernakiewicz M, Toni A (2001) Even a thin layer of soft tissue may compromise the primary stability of cementless hip stems. Clin Biomech (Bristol, Avon) 16(9):765–775
Hopkins AR (2005) Total shoulder arthroplasty simulation using finite element analysis. Dissertation, Imperial College, London
Cann CE, Genant HK (1980) Precise measurement of vertebral mineral content using computed tomography. J Comput Assist Tomogr 4(4):493–500
McBroom RJ, Hayes WC, Edwards WT, Goldberg RP, White AA 3rd (1985) Prediction of vertebral body compressive fracture using quantitative computed tomography. J Bone Joint Surg Am 67(8):1206–1214
Carter DR, Hayes WC (1977) The compressive behavior of bone as a two-phase porous structure. J Bone Joint Surg Am 59(7):954–962
Whiteside LA, White SE, Engh CA, Head W (1993) Mechanical evaluation of cadaver retrieval specimens of cementless bone-ingrown total hip arthroplasty femoral components. J Arthroplasty 8(2):147–155
Rubin PJ, Rakotomanana RL, Leyvraz PF, Zysset PK, Curnier A, Heegaard JH (1993) Frictional interface micromotions and anisotropic stress distribution in a femoral total hip component. J Biomech 26(6):725–739
Dhert WJA, Jansen JA (2000) Mechanical testing of bone and the bone-implant interface. The validity of a single pushout test, 1 edn. CRC Press, USA
Rohlmann A, Cheal EJ, Hayes WC, Bergmann G (1988) A nonlinear finite element analysis of interface conditions in porous coated hip endoprostheses. J Biomech 21(7):605–611
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2014 The Author(s)
About this chapter
Cite this chapter
Abdul Kadir, M.R. (2014). Finite Element Model Construction. In: Computational Biomechanics of the Hip Joint. SpringerBriefs in Applied Sciences and Technology(). Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-38777-7_2
Download citation
DOI: https://doi.org/10.1007/978-3-642-38777-7_2
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-38776-0
Online ISBN: 978-3-642-38777-7
eBook Packages: EngineeringEngineering (R0)