Skip to main content

Abstract

New technology deployment for facilitating the control and managing huge amount of data and its uncertainty is very important challenge in the industry field. Energy sector as important part of the industry knows nowadays a high transformation towards renewable energy, and one of important solution is the wind energy. The wind control system must guarantee safe and reliable operation, monitor components and variables, and check that these variables are in an admissible range and must perform the detection and prediction of faults. We propose in this paper a new Internet of Things solution to control and monitor a wind energy system. The IoT gateway is used as a bridge between the different devices in the wind turbine control system and Internet. We adopted OPC Unified Architecture, as a protocol of communication, and we implemented the new IoT tool Node-RED in the gateway, in order to facilitate the link between OPC UA client and IBM cloud. The obtained results are evaluated in real-time in the cloud platform which eventually provides a consistent analysis and interpretation, and making better decision.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 84.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 109.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. IRENA: Turning to Renewables: Climate-safe Energy Solutions (2017). http://www.irena.org/publications/2017/Nov/Turning-to-renewables-Climate-safe-energy-solutions. Accessed Nov 2017

  2. Blaabjerg, F., Ma, K.: Wind energy systems. Proc. IEEE 105(11), 2116–2131 (2017). https://doi.org/10.1109/jproc.2017.2695485

    Article  Google Scholar 

  3. Mönks, U., Trsek, H., Dürkop, L., Geneiß, V., Lohweg, V.: Towards distributed intelligent sensor and information fusion. Mechatronics 34, 63–71 (2016). https://doi.org/10.1016/j.mechatronics.2015.05.005

    Article  Google Scholar 

  4. Dhondge, K., Shorey, R., Tew, J.: HOLA: heuristic and opportunistic link selection algorithm for energy efficiency in Industrial Internet of Things (IIoT) systems. In: COMSNETS 2016 - Workshop on Wild and Crazy Ideas on the Interplay Between IoT and Big Data. IEEE (2016)

    Google Scholar 

  5. Tedeschi, S., Mehnen, J., Tapoglou, N., Roy, R.: Secure IoT devices for the maintenance of machine tools. In: The 5th International Conference on Through-life Engineering Services (TESConf 2016). Elsevier. https://doi.org/10.1016/j.procir.2016.10.002

  6. Kagermann, H.: Change through digitization—value creation in the age of Industry 4.0. In: Albach, H., Meffert, H., Pinkwart, A., Reichwald, R. (eds.) Management of Permanent Change, pp. 23–45. Springer, Wiesbaden (2015). https://doi.org/10.1007/978-3-658-05014-6_2

    Chapter  Google Scholar 

  7. Bhatt, J.G., Jani, O.K.: Smart grid: energy backbone of smart city and e-Democracy. In: Vinod Kumar, T.M. (ed.) E-Democracy for Smart Cities. ACHS, pp. 319–366. Springer, Singapore (2017). https://doi.org/10.1007/978-981-10-4035-1_11

    Chapter  Google Scholar 

  8. Hafeez, A., Kandil, N.H., Al-Omar, B., Landolsi, T., Al-Ali, A.R.: Smart home area networks protocols within the smart grid context. J. Commun. 9(9), 665–671 (2014)

    Article  Google Scholar 

  9. Altamimi, A.B., Ramadan, R.A.: Towards internet of things modeling: a gateway approach. Complex Adapt. Syst. Model 4, 25 (2016). https://doi.org/10.1186/s40294-016-0038-3

  10. Vogel-Heuser, B., Hess, D.: Guest editorial Industry 4.0–prerequisites and visions. IEEE Trans. Autom. Sci. Eng. 13(2), 411–413 (2016)

    Article  Google Scholar 

  11. Gilchrist, A.: Introducing Industry 4.0. In: Industry 4.0. Apress, Berkeley (2016). https://doi.org/10.1007/978-1-4842-2047-4_13

    Chapter  Google Scholar 

  12. German National Academy of Science and Engineering (ACATECH): Cyber-physical systems: Driving force for innovation immobility, health, energy and production. Technical report, December 2011

    Google Scholar 

  13. Möller, D.P.F.: Digital Manufacturing/Industry 4.0. In: Guide to Computing Fundamentals in Cyber-Physical Systems. CCN, pp. 307–375. Springer, Cham (2016). https://doi.org/10.1007/978-3-319-25178-3_7

    Google Scholar 

  14. Chen, Y., Lee, G.M., Shu, L., Crespi, N.: Industrial Internet of Things-based collaborative sensing intelligence: framework and research challenges. Sensors 16, 215 (2016). https://doi.org/10.3390/s16020215

    Article  Google Scholar 

  15. Tavner, P., Xiang, J., Spinato, F.: Reliability analysis for wind turbines. Wind Energy 10, 1–18 (2007)

    Article  Google Scholar 

  16. Cecati, C., Guinjoan, F., Siano, P., Spagnuolo, G.: Introduction to the special section on smart devices for renewable energy systems. IEEE Trans. Ind. Electron. 60, 1119–1121 (2013)

    Article  Google Scholar 

  17. Shang, G., Chen, Y., Zuo, C., Zhu, Y.: Design and implementation of a smart IoT gateway. In: 2013 IEEE International Conference on Green Computing and Communications and IEEE Internet of Things and IEEE Cyber, Physical and Social Computing. https://doi.org/10.1109/greencom-ithings-cpscom.2013.130

  18. Zhu, Q., Wang, R., Chen, Q., Liu, Y., Qin, W.: IOT gateway: bridging wireless sensor networks into Internet of Things. IEEE (2010). https://doi.org/10.1109/euc.2010.58

  19. Chen, H., Jia, X., Li, H.: A brief introduction to IoT gateway. In: Communication Technology and Application (ICCTA 2011), IET International Conference, 14–16 October 2011. https://doi.org/10.1049/cp.2011.0740

  20. Ferrández-Pastor, F.J., García-Chamizo, J.M., Nieto-Hidalgo, M., Mora-Pascual, J., Mora-Martínez, J.: Developing ubiquitous sensor network platform using Internet of Things: application in precision agriculture. Sensors 16(7), 1141 (2016). https://doi.org/10.3390/s16071141

    Article  Google Scholar 

  21. da Silva, F., Ohta, R.L., dos Santos, M.N., dos Binotto, A.P.D.: A cloud-based architecture for the Internet of Things targeting industrial devices remote monitoring and control. IFAC-PapersOnLine 49(30), 108–113 (2016)

    Article  Google Scholar 

  22. Hemmatpour, M., Ghazivakili, M., Montrucchio, B., Rebaudengo, M.: DIIG: a distributed industrial IoT gateway. In: 2017 IEEE 41st Annual Computer Software and Applications Conference. https://doi.org/10.1109/compsac.2017.110

  23. Lojka, T., Miškuf, M., Zolotová, I.: Industrial IoT gateway with machine learning for smart manufacturing. In: Nääs, I., Vendrametto, O., Reis, J.M., Gonçalves, R.F., Silva, M.T., von Cieminski, G., Kiritsis, D. (eds.) APMS 2016. IAICT, vol. 488, pp. 759–766. Springer, Cham (2016). https://doi.org/10.1007/978-3-319-51133-7_89

    Chapter  Google Scholar 

  24. The Intelligent Gateway for Industrial IoT Solutions. http://w3.siemens.com/mcms/pc-based-automation/en/industrial-iot/pages/default.aspx

  25. Georgakopoulos, D., Jayaraman, P.P., Fazia, M., Villari, M., Ranjan, R.: Internet of Things and edge cloud computing roadmap for manufacturing. IEEE Cloud Comput. 3(4), 66–73 (2016). https://doi.org/10.1109/mcc.2016.91

    Article  Google Scholar 

  26. Xiong, G., Ji, T., Zhang, X., Zhu, F., Liu, W.: Cloud operating system for industrial application. In: 2015 IEEE International Conference on Service Operations and Logistics, and Informatics (SOLI)

    Google Scholar 

  27. Oracle Cloud, Complete, Integrated Cloud. https://cloud.oracle.com/en_US/home

  28. IBM Cloud Computing is Designed for Business. https://www.ibm.com/cloud/

  29. Microsoft Cloud. https://azure.microsoft.com/en-us/

  30. Cloud Computing at SAP. https://www.sap.com/trends/cloud.html

  31. The OPC Unified Architecture (UA). https://opcfoundation.org/about/opc-technologies/opc-ua/

  32. Forsström, S., Jennehag, U.: A performance and cost evaluation of combining OPC-UA and Microsoft Azure IoT Hub into an industrial Internet-of-Things System. In: Global Internet of Things Summit (GIoTS). IEEE (2017). https://doi.org/10.1109/giots.2017.8016265

  33. Bangemann, T., et al.: State of the art in industrial automation. In: Colombo, A.W., Bangemann, T., Karnouskos, S., Delsing, J., Stluka, P., Harrison, R., Jammes, F., Lastra, J.L. (eds.) Industrial Cloud-Based Cyber-Physical Systems, pp. 23–47. Springer, Cham (2014). https://doi.org/10.1007/978-3-319-05624-1_2

    Chapter  Google Scholar 

Download references

Acknowledgments

This work was partially supported by projects TIN2014-55024-P from the Spanish Ministry of Science and Innovation and P11-TIC-8001 from Junta de Andalucía (including FEDER funds), SENECA Foundation 19882-GERM-15.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Marouane Salhaoui .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2018 Springer International Publishing AG, part of Springer Nature

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Salhaoui, M., Arioua, M., Guerrero-González, A., García-Cascales, M.S. (2018). An IoT Control System for Wind Power Generators. In: Medina, J., Ojeda-Aciego, M., Verdegay, J., Perfilieva, I., Bouchon-Meunier, B., Yager, R. (eds) Information Processing and Management of Uncertainty in Knowledge-Based Systems. Applications. IPMU 2018. Communications in Computer and Information Science, vol 855. Springer, Cham. https://doi.org/10.1007/978-3-319-91479-4_39

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-91479-4_39

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-91478-7

  • Online ISBN: 978-3-319-91479-4

  • eBook Packages: Computer ScienceComputer Science (R0)

Publish with us

Policies and ethics