Abstract
Machine tools in actual construction, being related to the trend towards to machine tools of high productivity and increased precision and having in view the context of transition to Industry 4.0, have to be studied deeply in the stage of conception and also in that of exploiting. For both situations, the modeling and simulation of the machine tool regarded as a mechatronic system represent methods of analysis, assessment, and optimization for its improvement.
This work proposes the approaching the subject from the point of view of modeling and simulation of one assembly of the machine tool that proves one of the most sensitive kinematic structure responsible for the machine tool precision. The modeling, either Rigid Body Simulation, Digital Block Simulation, Finite Element Modeling or combinations types, implies a concrete and accurate definition of the dynamic parameters stiffness, damping, and friction.
Some mathematical approaches for determining these parameters are presented. Also, some product catalog values and relations coming from the engineering and research experience applied to feed drive components and also to the whole kinematic chain are given. Furthermore, some practical testing and calculation methods are presented.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ahmadi, K., Ahmadian, H.: Modelling machine tool dynamics using a distributed parameter tool–holder joint interface. Int. J. Mach. Tools Manuf 47(12–13), 1916–1928 (2007)
Butcher, E.A., Nindujarla, P., Bueler, E.: Stability of up-and down-milling using Chebyshev collocation method. In: ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 841–850. American Society of Mechanical Engineers, January 2005
Constantin, G., Ghionea, A.: Feed kinematic chain of the bridge in Gantry machine-tools. Archiwum Technologii Maszyn i Automatyzacji 28(2), 75–84 (2008)
Constantin, G., Predincea, N.: Aspectes regarding optimal design of machine tool feed drives. Proc. Manuf. Syst. 10(4), 171 (2015)
Copani, G., Molinari Tosatti, L., Lay, G., Schroeter, M., Bueno, R.: New business models diffusion and trends in European machine tool industry. In: Proceedings of 40th CIRP International Manufacturing Systems Seminar, May 2007
Erkorkmaz, K., Yeung, C.H., Altintas, Y.: Virtual CNC system. Part II. High speed contouring application. Int. J. Mach. Tools Manuf 46(10), 1124–1138 (2006)
Fleischer, J., Broos, A.: Parameteroptimierung bei Werkzeugmaschinen–Anwendungsmöglichkeiten und Potentiale. Weimarer Optimierungs-und Stochastiktage, 1 (2004)
Fredin, J.: Modelling, simulation and optimisation of a machine tool (Doctoral dissertation, Blekinge Institute of Technology) (2009)
Groche, P., Hofmann, T.: Einfluss des dynamischen Übertragungsverhaltens von Stößelführungen auf die Arbeitsgenauigkeit von Umformpressen. EFB Hannover (2005)
HIWIN Linear Guideway. http://ruchservomotor.com/Pdf_english/H_L_G_(Low).pdf
HIWIN Ballscrews. Technical Information. https://www.hiwin.com/pdf/ballscrews.pdf
INA-FAG, Schaeffler Technologies, Super Precison Bearings (2006). https://www.schaeffler.com/remotemedien/media/_shared_media/08_media_library/01_publications/schaeffler_2/catalogue_1/downloads_6/sp1_de_en.pdf
Knaapen, R.J.W., Kodde, L., de Kraker, A.: Experimental Determination of Rolling Element Bearing Stiffness. Technische Universiteit Eindhoven, Eindhoven (1997)
Krȁmer, E.: Dynamics of Rotors and Foundation. Springer, Berlin (1993)
Lee, W.J., Kim, S.I.: Joint stiffness identification of an ultra-precision machine for machining large-surface micro-features. Int. J. Precis. Eng. Manuf. 10(5), 115–121 (2009)
Maglie, P.: Parallelization of Design and Simulation, vol. 683. ETH Zurich, Zürich (2012)
Palgrem, A.: Les Roulments, Description, Theorie, Applications (Bearings, Description, Theory, Applications). SKF, Paris (1967)
Pandilov, Z., Milecki, A., Nowak, A., Górski, F., Grajewski, D., Ciglar, D., Klaić, M., Mulc, T.: Virtual modelling and simulation of a CNC machine feed drive system. Trans. FAMENA 39(4), 37–54 (2015)
Riba, R.C., Pérez, R.R., Ahuett, G.H., Jorge, L.S.A., Domínguez, M.D., Molina, G.A.: Metrics for evaluating design of reconfigurable machine tools. In: International Conference on Cooperative Design, Visualization and Engineering, pp. 234–241. Springer, Berlin, Heidelberg, September 2006
Schlecht, B.: Maschinenelemente: Getriebe-Verzahnungen-Legerungen. Pearson Studium, ein Imprint von Pearson Education (2010)
Servomech, Ball screws and nuts, Catalogue (2010). http://www.servomech.it/Pdf/prodotti/SERVOMECH-ball-screws-and-nuts-catalogue.pdf
Slocum, A.: Precision Machine Design. Society of Manufacturing Engineers, Dearborn (1994)
Steinhilper, W., Sauer, B., Feldhusen, J.: Konstruktionselemente des Maschinenbaus 1: Grundlagen der Berechnung und Gestaltung von Maschinenelementen. Springer, Heidelberg (2008)
Stejskal, T., Svetlík, J., Dovica, M., Demeč, P., Kráľ, J.: Measurement of static stiffness after motion on a three-axis CNC milling table. Appl. Sci. 8(1), 15 (2017)
Stratulat, F., Ionescu, F., Constantin, G.: Dynamic evaluation of a linear axis in milling using modelling and simulation environment. In: Proceedings of the International Conference on Manufacturing Systems, ICMaS, pp. 99–104 (2007)
Thurneysen, M., Demaurex, G.: Modalanalyse von komplexen Maschinen, praktische Ueberpruefung. In: Symposium Simulation von Werkzeugmaschinen. IWF/inspire, ETHZ (2008)
Wang, D., Lu, Y., Zhang, T., Wang, K., Rinoshika, A.: Effect of stiffness of rolling joints on the dynamic characteristic of ball screw feed systems in a milling machine. Shock Vib. 2015, 11 (2015)
Xian-chun, S., Jian, S., Ming-yuan, C., Yan-feng, L.: Research on axial stiffness of the double-nut ball screw mechanism. In: Proceedings of the 1st International Conference on Mechanical Engineering and Material Science. Atlantis Press, December 2012
Zaeh, M., Siedl, D.: A new method for simulation of machining performance by integrating finite element and multi-body simulation for machine tools. CIRP Ann. Manuf. Technol. 56(1), 383–386 (2007)
Zaghbani, I., Songmene, V.: Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis. Int. J. Mach. Tools Manuf 49(12–13), 947–957 (2009)
Zhang, Y.M., Xie, Z.K., Liu, Y.X.: Modeling and calculation of dynamic performances of NC machine tool considering linear rolling guideway. Appl. Mech. Mater. 16, 510–514 (2009)
Zhu, J., Zhang, T., Li, X.: Dynamic characteristic analysis of ball screw feed system based on stiffness characteristic of mechanical joints. J. Mech. Eng. 51, 72–82 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Constantin, G. (2018). Dynamic Definition of Machine Tool Feed Drive Models in Advanced Machine Tools. In: Ni, J., Majstorovic, V., Djurdjanovic, D. (eds) Proceedings of 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing. AMP 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-89563-5_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-89563-5_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-89562-8
Online ISBN: 978-3-319-89563-5
eBook Packages: EngineeringEngineering (R0)