Abstract
About half of the energy spent in aluminium electrolysis is lost as heat. A preliminary study concerning the possibilities of recovering part of that heat was carried out, primarily focusing on electrical power production. The three main heat sources (cathode sides, anode yokes, and gas) were combined in different ways, using different types of power cycles. The potential for electric power production is significant (up to 9 percent of the total consumption). The two most promising families of power cycles appear to be 1) distributed open Brayton cycle based on a turbo charger and 2) centralised power production with a Rankine cycle. The temperature and amount of heat available in the anode match well with the heat from the sides, while the potential of integrating the flue gas is limited. The main aims in energy recovery may be increased productivity or reduced energy consumption, which gives different strategies for heat collection.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
O.-J. Siljan, “Electrolysis Cell and Structural Elements to be Used Therein”, WO/2004/083489.
J.A. Aune, K. Johansen, and P.O Nos, “Electrolytic Cell for the Production of Aluminium and a Method for Maintaining a Crust on a Sidewall and Recovering Electricity”, WO/2001/94667.
B.P. Moxnes and A. Solheim, “Method and Means for Control of Heat Balance”, WO/2006/088375.
E. Næss, T. Slungaard, O. Sønju, and B.P. Moxnes, “A Method and Equipment for Heat Recovery”, WO/2006/009459.
H.K. Holmen and S. Gjørven, “A Method and a System for Energy Recovery and/or Cooling”, WO/2006/031123.
J.A. Aune and P.O. Nos, “Method for Controlling the Temperature of Components in High Temperature Reactors”, WO/2002/39043.
AW. Crook, “Profiting from Low Grade Heat”, IEE Energy Series 7, IBSN 0 85296 8355.
U. Drescher and D. Brüggemann, “Fluid Selection for the Organic Rankine Cycle (ORC) in Biomass Power and Heat Plants”, Applied Thermal Engineering 27 (2007), pp. 223/28.
Y. Chen, P. Lundqvist, A. Johansson, and P. Platell, “A Comparative Study of the Carbon Dioxide Transcritical Power Cycle Compared with an Organic Rankine Cycle with R123 as Working Fluid in Waste Heat Recovery”, Applied Thermal Engineering 26 (17–18) (2007), pp. 2142/47.
A. Solheim, H. Gudbrandsen, and S. Rolseth, “Sideledge in Aluminium Cells: The Trench at the Metal-Bath Boundary”, Light Metals 2009, pp. 411/16.
V. V. Sharapova, “Study of the Interconnection of Aluminium Electrolyzer Life with Corrosion of its Casing” Translated from Novye Ogneupory, No. 1, pp. 39/42, January 2009, http://www.springerlink.com/content/nx838151vl360721/
A. Solheim, B. P. Moxnes, K. Vamraak, and E. Haugland, “Energy Recovery and Amperage Increase in Aluminium Cells by Active Cooling of the Anode Yokes”, Light Metals 2009, pp. 1091/96.
S. Gjørven, Y. Ladam, B.P. Moxnes, P. Nekså, and A. Solheim, “Method and Means for Extracting Heat from Aluminium Electrolysis Cells”, WO/2010/050823.
O.-A. Lorentsen, A. Dyrøy, and M. Karlsen, “Handling CO2eq from an Aluminum Electrolysis Cell”, Light Metals 2009, pp. 263/68.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Ladam, Y., Solheim, A., Segatz, M., Lorentsen, OA. (2011). Heat Recovery from Aluminium Reduction Cells. In: Lindsay, S.J. (eds) Light Metals 2011. Springer, Cham. https://doi.org/10.1007/978-3-319-48160-9_70
Download citation
DOI: https://doi.org/10.1007/978-3-319-48160-9_70
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48567-6
Online ISBN: 978-3-319-48160-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)