Abstract
In the past few years, continuous flow processing has slowly started to find place in academic research. Considered more of an industrial value for large-scale synthesis in chemical industry, it took more than half a century for academia to slowly adopt this technology for small-scale laboratory synthesis. Although there are clear benefits, especially whenever working with hazardous intermediates, that have to be generated in situ, or rapid heat dissipation and efficient mixing are needed, the general use of continuous flow synthesis on a daily basis in the modern research laboratory remains controversial. Still, flow synthesis appears to be seen as a curiosity and merely an expert tool among the many other and more “traditional” synthesis techniques. As such, the plethora of recent examples found in the literature remains focused on exploring the capabilities of the available equipment for optimizing already established syntheses and rarely a novelty from a chemical point of view is found. The challenge of processing heterogeneous reactions and reagents, highly viscous or highly corrosives materials, as well as the required time and labor investment for developing a running flow process depict further hurdles. Nevertheless, and in many instances, the use of dedicated flow equipment has proven its value and can bring undisputable advantage for the synthetic chemist in the research laboratory—continuous flow hydrogenation, ozonolysis, or lithium exchange reactions are just some of these synthetic examples. Although continuous flow technology offers a technically unique way to perform synthetic reactions, the question of whether to use this technique for a chemical transformation should be taken by an experienced chemist.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Selected Recent Books on Organic Synthesis Under Continuous Flow Conditions
V. Hessel, S. Hardt, H. Löwe, Chemical Micro Process Engineering (Wiley-VCH, Weinhem, 2004)
J. Yoshida, Flash Chemistry: Fast Organic Synthesis in Microsystems (Wiley-Blackwell, Chichester, 2008)
T. Dietrich, Principles and Applications of Chemical Microreactors (Wiley, Hoboken, 2008)
T. Wirth (ed.), Microreactors in Organic Synthesis and Catalysis (Wiley-VCH, Weinheim, 2008)
V. Hessel, A. Renken, J.C. Schouten, J. Yoshida (eds.), Micro Process Engineering. A Comprehensive Handbook, vols. 1–3 (Wiley-VCH, Weinheim, 2009)
C. Wiles, P. Watts, Micro Reaction Technology in Organic Synthesis (CRC Press, Boca Raton, 2011)
W. Reschetilowski (ed.), Microreactors in Preparative Chemistry (Wiley-VCH, Weinheim, 2013)
T. Wirth (ed.), Microreactors in Organic Synthesis and Catalysis. Second, Completely Revised and Enlarged Edition (Wiley-VCH, Weinheim, 2013)
F. Darvas, G. Dorman, V. Hessel (eds.), Flow Chemistry, vols. 1-2 (De Gruyter GmbH, Berlin/Boston, 2014)
J. Yoshida, Basics of Flow Microreactor Synthesis (Springer, Tokyo, 2015)
V. Hessel, D. Kralissh, N. Kockmann, Novel Process Windows—Innovative Gates to intensified and Sustainable Chemical Processes (Wiley-VCH, Weinheim, 2015)
Selected Recent Reviews on Organic Synthesis Under Continuous Flow Conditions (2010–2015)
C.G. Frost, L. Mutton, Green Chem. 12, 1687 (2010)
T. Illg, P. Lob, V. Hessel, Bioorg. Med. Chem. 18, 3707 (2010)
S.V. Ley, Tetrahedron 66, 6270 (2010)
S. Marre, K.F. Jensen, Chem. Soc. Rev. 39, 1183 (2010)
J.P. McMullen, K.F. Jensen, Annu. Rev. Anal. Chem. 3, 19 (2010)
T. Razzaq, C.O. Kappe, Chem. Asian. J. 5, 1274 (2010)
F.E. Valera, M. Quaranta, A. Moran, J. Blacker, A. Armstrong, J.T. Cabral, D.G. Blackmond, Angew. Chem. Int. Ed. 49, 2478 (2010)
D. Webb, T.F. Jamison, Chem. Sci. 1, 675 (2010)
J. Yoshida, Chem. Rec. 10, 332 (2010)
C. Wiles, P. Watts, Adv. Chem. Eng. 38, 103 (2010)
A. Cukalovic, J.-C.M.R. Monbaliu, C. Stevens, Top. Heterocycl. Chem. 23, 161 (2010)
T.N. Glasnov, C.O. Kappe, J. Heterocycl. Chem. 48, 11 (2011)
R.L. Hartman, J.P. McMullen, K.F. Jensen, Angew. Chem. Int. Ed. 50, 7502 (2011)
M. Rasheed, T. Wirth, Angew. Chem. Int. Ed. 50, 357 (2011)
J. Wegner, S. Ceylan, A. Kirschning, Chem. Commun. 47, 4583 (2011)
C. Wiles, P. Watts, Chem. Commun. 47, 6512 (2011)
J. Yoshida, H. Kim, A. Nagaki, ChemSusChem 4, 331 (2011)
T.N. Glasnov, C.O. Kappe, Chem. Eur. J. 17, 11956 (2011)
M. Irfan, T.N. Glasnov, C.O. Kappe, ChemSusChem 4, 300 (2011)
T. Nöel, S.L. Buchwald, Chem. Soc. Rev. 40, 5050 (2011)
J.W. Tucker, Y. Zhang, T.F. Jamison, C.R.J. Stephenson, Angew. Chem. Int. Ed. 51, 4144 (2012)
A. Kirschning, L. Kupracz, J. Hartwig, Chem. Lett. 41, 562 (2012)
J. Wegner, S. Ceylan, A. Kirschning, Adv. Synth. Catal. 354, 17 (2012)
C. Wiles, P. Watts, Green Chem. 14, 38 (2012)
L. Malet-Sanz, F. Susanne, J. Med. Chem. 55, 4062 (2012)
M. Oelgemoeller, Chem. Eng. Technol. 35, 1144 (2012)
T. Chinnusamy, S. Yudha, S.M. Hager, P. Kreitmeier, O. Reiser, ChemSusChem 5, 247 (2012)
C.B. McPake, G. Sandford, Org. Process Res. Dev. 16, 844 (2012)
T. Tsubogo, T. Ishiwata, S. Kobayashi, Angew. Chem. Int. Ed. 52, 6590 (2013)
T. Nöel, V. Hessel, ChemSusChem 6, 405 (2013)
I.R. Baxendale, J. Chem. Technol. Biotechnol. 88, 519 (2013)
D.T. McQuade, P.H. Seeberger, J. Org. Chem. 78, 6384 (2013)
J.C. Pastre, D.L. Browne, S.V. Ley, Chem. Soc. Rev. 42, 8849 (2013)
J. Yoshida, A. Nagaki, D. Yamada, Drug Discov. Today Technol. 10, e53 (2013)
J. Yoshida, Y. Takahashi, A. Nagaki, Chem. Commun. 49, 9896 (2013)
V. Hessel, D. Kralish, N. Kockmann, T. Nöel, Q. Wang, ChemSusChem 6, 746 (2013)
S.G. Newman, K.F. Jensen, Green Chem. 15, 1456 (2013)
A. Puglisis, M. Benaglia, V. Chiroli, Green Chem. 15, 1790 (2013)
T. Rodrigues, P. Schneider, G. Schneider, Angew. Chem. Int. Ed. 53, 5750 (2014)
K.S. Elvira, X. Casadevall i Solvas, R.C.R. Wootton, A. J. deMello, Nat. Chem. 5, 905 (2013)
T. Fukuyama, T. Totoki, I. Ryu, Green Chem. 16, 2042 (2014)
Y. Su, N.J.W. Straathof, V. Hessel, T. Nöel, Chem. Eur. J. 20, 10562 (2014)
C. Wiles, P. Watts, Green Chem. 16, 55 (2014)
T. Fukuyama, T. Totoki, I. Ryu, Green Chem. 16, 2042 (2014)
L. Vaccaro, D. Lanari, A. Marrocchi, G. Strappaveccia, Green Chem. 16, 3680 (2014)
S. Fuse, Y. Mifune, N. Tanabe, T. Takahashi, Synlett 25, 2087 (2014)
K. Gilmore, P. Seeberger, Chem. Rec. 14, 410 (2014)
K. Hargrove, G. Jones, Curr. Radiopharm. 7, 36 (2014)
B. Gutmann, D. Cantillo, C.O. Kappe, Angew. Chem. Int. Ed. 54, 6688 (2015)
S.V. Ley, D.E. Fitzpatrick, R.M. Myers, C. Battilocchio, R.J. Ingham, Angew. Chem. Int. Ed. 54, 10122 (2015)
M. Baumann, I.R. Baxendale, Beilstein J. Org. Chem. 11, 1194 (2015)
J. Bao, G.K. Tranmer, Chem. Commun. 51, 3037 (2015)
F.G. Finelli, L.S.M. Miranda, R.O.M.A. de Souza, Chem. Commun. 51, 3708 (2015)
B.J. Deadman, S.G. Collins, A.R. Maguire, Chem. Eur. J. 21, 2298 (2015)
S.T.R. Müller, T. Wirth, ChemSusChem 8, 245 (2015)
P.J. Cossar, L. Hizartzidis, M.I. Simone, A. McCluskey, C.P. Gordon, Org. Biomol. Chem. 13, 7119 (2015)
H.P.L. Gemoets, Y. Su, M. Shang, V. Hessel, R. Luque, T. Nöel, Chem. Soc. Rev. 45, 83 (2016)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Glasnov, T. (2016). Continuous Flow Synthesis: A Short Perspective. In: Continuous-Flow Chemistry in the Research Laboratory. Springer, Cham. https://doi.org/10.1007/978-3-319-32196-7_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-32196-7_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-32194-3
Online ISBN: 978-3-319-32196-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)