Abstract
A porous tubular-type ultra-high molecular weight polyethylene (UHMWPE) membrane with good filtration effect for turbid circulating water was designed and prepared. The physical-chemistry properties such as surface microstructure and tensile strength of tubular-type UHMWPE membrane were investigated. UHMWPE membrane consists of agglomerated particles with diameters of 127–229 μm. The UHMWPE membrane has a porous structure with pore diameter of 40–152 μm, which can enhance the permeability of UHMWPE membrane. The accumulation and distribution of oxide scale particles in UHMWPE membrane after having been used for 5 years were also analyzed. Oxide scale particles are mainly accumulated on the surface layer of UHMWPE membrane. And the fouling layer is about 2.052 mm. The accumulation of oxide scale particles decreases with the increase of distance from the inner surface of the UHMWPE membrane. The accumulation is about 0.96% at L = 0.342 mm, and the accumulation is about 0.36% at L = 2.052 mm in the UHMWPE membrane. UHMWPE membrane exhibits excellent antifouling property for long-term use.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Jin JT, Wu GX, He K (2014) Effect of ions on carbon steel corrosion in cooling systems with reclaimed waste water as the alternative makeup water. Desal Water Treat 52:7565–7574
Xu JC, Chen G, Huang XF (2009) Iron and manganese removal by using manganese ore constructed wetlands in the reclamation of steel wastewater. J Hazard Mater 169:309–317
Yuan ZF, Xie SS, Yu XT (2018) Physical-chemical property and filtration mechanism of the porous polyvinyl chloride composite membrane as filter for waste water treatment. Desal Water Treat 105:35–40
Yun CY, Kim WY, Son DJ (2015) Fabrication of tubular-type MF ceramic membrane with enhanced permeability by addition of PMMA in the support and evaluation of physical characteristics for wastewater treatment. Ceram Int 41(9):10788–10794
Lee SJ, Dilaver M, Park PK (2013) Comparative analysis of fouling characteristics of ceramic and polymeric microfiltration membranes using filtration models. J Membr Sci 432:97–105
Liu H, Pei Y, Xie D (2010) Surface modification of ultra-high molecular weight polyethylene (UHMWPE) by argon plasma. Appl Surf Sci 256(12):3941–3945
Stojilovic N, Dordevic SV, Stojadinovic S (2017) Effects of clinical X-ray irradiation on UHMWPE films. Nucl Instrum Meth B 410:139–143
García A, Domínguez-Díaz M, Paniagua R (2019) Microhardness modification of ultrahigh-molecular-weight polyethylene by oxygen plasma: effect of the polymer crosslinking. Nucl Instrum Meth B 445:8–12
Liu S, Zhou C, Yu W (2011) Phase separation and structure control in ultra-high molecular weight polyethylene microporous membrane. J Membr Sci 379(1–2):268–278
Shen L, Peng M, Qiao F (2008) Preparation of microporous ultra high molecular weight polyethylene (UHMWPE) by thermally induced phase separation of a UHMWPE/liquid paraffin mixture. Chinese J Polym Sci 26(06):653–657
Wang C, Chen WN, Hu QY (2015) Dynamic fouling behavior and cake layer structure changes in nonwoven membrane bioreactor for bath wastewater treatment. Chem Eng J 264:462–469
Altunkaynak A, Chellam S (2010) Prediction of specific permeate flux during crossflow microfiltration of polydispersed colloidal suspensions by fuzzy logic models. Desalination 253(1–3):188–194
Park J, Lee S, You J (2018) Evaluation of fouling in nanofiltration for desalination using a resistance-in-series model and optical coherence tomography. Sci Total Environ 642:349–355
Luo M, Wang Z (2001) Complex fouling and cleaning-in-place of a reverse osmosis desalination system. Desalination 141:15–22
Hwang KJ, Wang SY, Iritani E (2016) Fine particle removal from seawater by using cross-flow and rotating-disk dynamic filtration. J Taiwan Inst Chem E 62:45–53
Gul RM, McGarry FJ (2004) Processing of ultra-high molecular weight polyethylene by hot isostatic pressing, and the effect of processing parameters on its microstructure. Polym Eng Sci 44(10):1848–1857
Yu KQ, Yu JT, Dai JG (2018) Development of ultra-high performance engineered cementitious composites using polyethylene (PE) fibers. Constr Build Mater 158:217–227
Lee JY, Choi BK, Ahn KH (2012) Characteristics of flux and gel layer on microfilter and non-woven fabric filter surface based on anoxicaerobic MBRs. Bioproc Biosyst Eng 35:1389–1398
Metzger U, Le-Clech P, Stuetz RM (2007) Characterisation of polymeric fouling in membrane bioreactors and the effect of different filtration modes. J Membr Sci 301(1–2):180–189
Acknowledgements
This research work was supported by the National Natural Science Foundation of China (Grant Nos. 51974022, U1738101) and Fundamental Research Funds for the Central Universities (Grant No. FRF-MP-18-007).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Xie, S.S., Yuan, Z.F., Shi, Y.T. (2020). Fabrication of Ultra-High Molecular Weight Polyethylene Membrane and Evaluation of Physical Characteristics for Wastewater Treatment. In: Li, J., et al. Characterization of Minerals, Metals, and Materials 2020. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-36628-5_35
Download citation
DOI: https://doi.org/10.1007/978-3-030-36628-5_35
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-36627-8
Online ISBN: 978-3-030-36628-5
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)