Abstract
In this work, an alternative aluminium matrix composite (AMCs) was designed from the recycled chips of the aluminium, Alumix 431 given by Brazilian aeronautic company, through combined method of powder metallurgy followed by Sintering + Forging. We aimed for the application for the connection pieces to transfer motion mainly used in automotive and aeronautical area as an alternative replacement for conventional alloys used in this area. First of all, A typical matrix was developed from recycled aluminium (AA 431) chips by high energy milling in a planetary ball mill with an inert argon atmosphere to prevent oxidation of the powders and this matrix was reinforced basically with TiC (5 wt % and 10 wt %) and molybdenum and copper (Mo 4 wt %, Cu 4 wt %) as a secondary reinforcements respectively. Mechanical and physical properties were evaluated through micro-hardness, static compression and 3 point bending (PB) tests and impact-drop weight tests were carried out. The microstructure analyses have been carried out by Scanning Electron Microscope (SEM).
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
H. Fallahdoost, A. Nouri, A. Azimi, Dual function of TiC nanoparticles on tribological performance of Al/graphite composites. J. Phys. Chem. Solids 93, 137–144 (2016)
L. Qian, X. Pang, J. Zhou, J. Yang, D. Hui, Theoretical model and finite element simulation on the effective thermal conductivity of particulate composite materials. Compos. Part B Eng. 116, 291–297 (2017)
K.A. Leyva-González, R. Deaquino-Lara, D. Pourjafari, R. Martínez-Sánchez, M.A.L. Hernandez-Rodriguez, E. García-Sánchez, Calorimetry study of the precipitation in an Al7075-graphite composite fabricated by mechanical alloying and hot extrusion. J. Therm. Anal. Calorim. 121, 589–595 (2015)
L.F.P. Ferreira, E. Bayraktar, I. Miskioglu, D. Katundi, Chapter 15: Design of Hybrid Composites from Scrap Aluminium Bronze Chips, in Mechanics of Composite and Multi-functional Materials, vol. 7, (Springer, Berlin, 2016), pp. 131–138. isbn:978-3-319-41766-0
A. Khandelwal, K. Mani, N. Srivastava, R. Gupta, G.P. Chaudhary, Mechanical behaviour of AZ31/Al2O3 magnesium alloy nanocomposites prepared using ultrasound assisted stir casting. Compos. Part B Eng. 123, 64–73 (2017)
F. Wang, Y. Li, X. Wang, Y. Koizumi, Y. Kenta, A. Chiba, In-situ fabrication and characterization of ultrafine structured Cu-TiC composites with high strength and high conductivity by mechanical milling. J. Alloy Comp. 657, 122–132 (2016)
L.M.P. Ferreira, M.H. Robert, E. Bayraktar, D. Zaimova, New design of aluminium based composites through combined method of powder metallurgy and thixoforming. Adv. Mater. Res. 939(1), 68–75 (2014)
V.A. Popov, E.V. Shelekhov, A.S. Prosviryakov, A.D. Kotov, M.G. Khomutov, Particulate metal matrix composites development on the basis of in situ synthesis of TiC reinforcing nanoparticles during mechanical alloying. J. Alloy Comp. 707, 365–370 (2017)
L.F.P. Ferreira, E. Bayraktar, M.H. Robert, I. Miskioglu, Chapter 17: Particles Reinforced Scrap Aluminium Based Composites by Combined Processing Sintering + Thixoforming, in Mechanics of Composite and Multi-functional Materials, vol. 7, (Springer, Berlin, 2016), pp. 145–152. isbn:978-3-319-41766-0
W.–.S. Tian, D.–.S. Zhou, F. Qiu, Q.-C. Jiang, Superior tensile properties of in situ nano sized TiCp/Al-Cu composites fabricated by reaction in melt method. Mater. Sci. Eng. A 658, 409–414 (2016)
A. Lekatou, A.E. Karantzalis, A. Evangelou, V. Gousia, G. Kaptay, Z. Gácsi, et al., Aluminum reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): Microstructure, wear and corrosion behaviour. Mater. Design 65, 1121–1135 (2015)
G.A. Bagheri, The effect of reinforcement percentages on properties of copper matrix composites reinforced with TiC particles. J. Alloy Comp. 676, 120–126 (2016)
H. Rudianto, J.K. Joo, Y.S. Sun, K.Y. Jin, I. Dlouhy, Mechanical properties of sintered of Al-5.5Zn-2.5Mg-0.5Cu PM alloy. Mater. Sci. Forum 794–796, 501–507 (2014)
Acknowledgements
Authors want to thank financial support from CNPq—National Council for Scientific and Technological Development, (Brazil) and Program French Cathedra UNICAMP/French Consulate in São Paulo, Brazil. Third author, E. Bayraktar thank personally to the French Consulate in Sao Paulo for partial financial support this research project.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Gatamorta, F., Miskioglu, I., Bayraktar, E., Melo, M.L.N.M. (2020). Recycling of Aluminium-431 by High Energy Milling Reinforced with TiC-Mo-Cu for New Composites in Connection Applications. In: Singh, R., Slipher, G. (eds) Mechanics of Composite and Multi-functional Materials, Volume 5. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-030-30028-9_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-30028-9_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-30027-2
Online ISBN: 978-3-030-30028-9
eBook Packages: EngineeringEngineering (R0)