Abstract
A pressure ulcer is a form of tissue degeneration as a result of sustained mechanical loading. In the last 3 decades a lot of research has been done to understand the aetiology of pressure ulcers. It has become clear that the initial signs of tissue damage are found at the cell scale. That is where the damage process starts that eventually leads to severe wounds. In order to define damage thresholds or to understand what cells “feel” it is necessary to have information on the mechanical status of cells at a scale in the order of micrometres. How the external loading, that is gravitational body forces and reaction forces at supporting surfaces on patients in a bed or a wheel chair, is transferred to a local mechanical state within tissues depends on tissue morphology, mechanical properties and other boundary conditions and requires an analysis at the scale of the order of centimetres to a meter. This cannot be done in one single analysis covering the entire range of scales. This chapter summarizes some work that our group has done in the last 10 years on multi-scale modelling of soft tissues that was aimed at understanding some of the phenomena that play a role in pressure ulcer development. The work has shown the potential of multi-scale modelling to gain insight in the very complex interactions at cell level. It was shown that the heterogeneity in the microstructure has a profound impact on the way cells deform as well as the mechanical property changes of the cell after they become damaged.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
EPUAP/NPUAP—Pressure ulcer prevention & treatment, clinical practice guideline. http://www.npuap.org/ (2009)
Bouten, C.V.C., Knight, M.M., Lee, D.A., Bader, D.L.: Compressive deformation and damage of muscle cell sub-populations in a model system. Ann. Biomed. Eng. 29, 153–163 (2001)
Bouten, C.V.C., Oomens, C.W.J., Baaijens, F.P.T., Bader, D.L.: The aetiology of pressure sores: skin deep or muscle bound? Arch. Phys. Med. Rehab. 84, 616–619 (2003)
Breuls, R.G.M., Sengers, B.G., Oomens, C.W.J., Bouten, C.V.C., Baaijens, F.P.T.: Predicting local cell deformations in engineered tissue constructs: A multilevel finite element approach. J. Biomech. Eng. 124, 198–207 (2002)
Gawlitta, D., Oomens, C.W.J., Bader, D.L., Baaijens, F.P.T., Bouten, C.V.C.: Temporal differences in the influence of ischemic factors and deformation on the metabolism of engineered skeletal muscle. J. Appl. Physiol. 103, 464–473 (2007)
Gawlitta, D., Li, W., Oomens, C.W.J., Baaijens, F.P.T., Bader, D.L., Bouten, C.V.C.: The relative contributions of compression and hypoxia to development of muscle tissue damage: An in vitro study. Ann. Biomed. Eng. 35, 273–284 (2007)
Linder-Ganz, E., Gefen, A.: Mechanical compression induced pressure sores in rat hind limb: muscle stiffness, histology and computational models. J. Appl. Physiol. 96, 2034–2049 (2004)
Stekelenburg, A., Strijkers, G.J., Parusel, H., Bader, D.L., Nicolay, K., Oomens, C.W.J.: The role of ischemia and deformation in the onset of compression induced. J. Appl. Physiol. 102, 2002–2011 (2007)
Nagel, T., Loerakker, S., Oomens, C.W.J.: A theoretical model to study the effects of cellular stiffening on the damage evolution in deep tissue injury. Comp. Meth. Biomech. Biomed. Engng. 12, 585–598 (2009)
Kouznetsova, V., Brekelmans, W.A.M., Baaijens, F.P.T.: An approach to micro-macro modeling of heterogeneous materials. Comput. Mech. 27, 37–48 (2001)
Smit, R.J.M., Brekelmans, W.A.M., Meijer, H.E.H.: Prediction of the mechanical behavior of nonlinear heterogeneous systems by multi-level finite element modeling. Comp. Meth. Appl. Mech. Engng. 155, 181–192 (1998)
Breuls, R.G.M., Bouten, C.V.C., Oomens, C.W.J., Bader, D.L., Baaijens, F.P.T.: Compression induced cell damage in engineered muscle tissue: an in vitro model to study pressure ulcer aetiology. Ann. Biomed. Eng. 31, 1357–1365 (2003)
Gefen, A.G., van Nierop, B.J., Bader, D.L., Oomens, C.W.J.: Strain-time cell death threshold for skeletal muscle in a tissue-engineered model system for deep tissue injury. J. Biomech. 41, 2003–2012 (2008)
Gefen, A., Gefen, N., Linder-Ganz, E., Margulies, S.S.: In vivo muscle stiffening under bone compression promotes deep pressure sores. J. Biomech. Engng 127, 512–524 (2005)
Loerakker, S., Manders, E., Strijkers, G.J., Nicolay, K., Baaijens, F.P.T., Bader, D.L., Oomens, C.W.J.: The effects of deformation, ischaemia and reperfusion on the development of muscle damage during prolonged loading. J. Appl. Phys. 111, 1168–1177 (2011)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Oomens, C.W.J. (2013). A Multilevel Finite Element Approach to Study Pressure Ulcer Aetiology. In: Gefen, A. (eds) Multiscale Computer Modeling in Biomechanics and Biomedical Engineering. Studies in Mechanobiology, Tissue Engineering and Biomaterials, vol 14. Springer, Berlin, Heidelberg. https://doi.org/10.1007/8415_2012_158
Download citation
DOI: https://doi.org/10.1007/8415_2012_158
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-36481-5
Online ISBN: 978-3-642-36482-2
eBook Packages: EngineeringEngineering (R0)