Regular ArticleA Steady-State Kinetic Model for Methanol Synthesis and the Water Gas Shift Reaction on a Commercial Cu/ZnO/Al2O3Catalyst
Abstract
A detailed reaction network, derived from literature data and our own experimental work, is used as a basis for the development of a steady-state kinetic model for methanol synthesis and the water gas shift reaction on a commercial Cu/ZnO/Al2O3catalyst. Experimental data, obtained in a bench scale setup, operating between 180 and 280°C and at pressures up to 51 bar, are subsequently used for the estimation of the parameters in the proposed model. The result is a mechanistically sound kinetic model, comprising a set of statistically significant and physically meaningful parameter groups. It accurately predicts the experimentally obtained conversions, even upon extrapolation outside the originally applied experimental window. Using this model, the influence of inlet temperature, pressure, and the ratio ofpCOandpCO2are briefly illustrated.
References (0)
Cited by (608)
Developing economically sustainable CO2 capture and conversion processes is essential to realize carbon neutrality. This study proposed an integrated process for CO2 capture and conversion-to-methanol (CCTM) and applied machine learning-based optimization to enhance techno-economic-environmental performance. After validating CO2 capture and CO2-to-methanol sections, an advanced CCTM design was developed and compared with conventional one regarding techno-economic-environmental performance across various operating scenarios. The advanced CCTM exhibited significant improvements in energy consumption (14.73–16.30%), production cost (0.81–1.28%), and net CO2 reduction (3.13–3.38%) owing to efficiently reusing waste heat, off-gas, and water resources. The one-at-a-time sensitivity analysis revealed roles of each variable and nonlinear variable-performance tendencies among operating variables in the advanced CCTM process. Subsequently, a well-developed deep neural network (DNN) model precisely formulated the relationship between key variables and performances. The DNN-based optimization provided optimum operating conditions within a minute, resulting in an 8.21 $/tMeOH (∼0.81%) reduction in production cost compared to base case of CCTM. Notably, the total CO2 capture rate of 92.53% at an optimal condition highlighted the significant contribution of advanced CCTM to carbon neutrality. The findings provide a viable reference for the effective and sustainable design and operation of an integrated CCTM process.
Methanol compared to other fuels for on-board hydrogen production in thermally balanced membrane reactors with internal recycle
2024, Chemical Engineering and Processing - Process IntensificationNew processes for hydrogen production from various sources are required, which will enable decentralized hydrogen utilization. Hydrogen is a challenging energy carrier due to its low volumetric energy density, requiring compression or liquefaction, which are costly steps, reducing the overall energy transformation cycle efficiency. Thus, a hydrogen supply route based on distributed on-demand production is more attractive compared to the traditional centralized production route. In this work we analyze the use of methanol as a hydrogen carrier to be converted to hydrogen in a conceptual autothermal scaled-down system for on-board pure hydrogen production. This system integrates two concentric reactors, membrane separation and heat exchange. The required heat is supplied by catalytic combustion of the reforming effluents which are recycled internally. The temperature profile is controlled by distribution of the combustion feed. A validated mathematical model shows that the thermal efficiency of the hydrogen production process from methanol will be much higher (e.g. 45 % vs 15 % in one case, 60 % vs 30 % in another case) compared to the efficiency obtained when feeding other fuels (methane, ethanol or glycerol). In all cases full conversion of the fuel is obtained. The reason for such a significant intensification is the lack of methane formation in the reforming reactor. This leads to higher driving force for hydrogen transport through the membranes and enables lower operating temperatures, reducing heat losses to the surroundings (which are the main source for efficiency loss). The lack of methane formation is due to the Cu-based catalyst used for methanol reforming, as opposed to the Ni-based catalyst used for reforming of other fuels.
A robust kinetic modeling of CO<inf>2</inf> hydrogenation to methanol over an industrial copper–zinc oxide catalyst based on a single-active site mechanism
2024, International Journal of Hydrogen EnergyThe catalytic hydrogenation of carbon dioxide to methanol represents a promising avenue for global warming alleviation. In the present study, the kinetics of high-pressure methanol synthesis from CO2 hydrogenation over a Cu/ZnO/Al2O3 catalyst were investigated. This study focused on developing a robust kinetic model based on a competitive single-active site Langmuir−Hinshelwood−Hougen−Watson (LHHW) mechanism and utilizing the model to investigate the influence of various operating conditions on the catalytic fixed-bed reactor performance, including temperature, total reactor pressure, feed composition, and gas hourly space velocity (GHSV). The model satisfied the physicochemical constraints to be thermodynamically consistent, and its prediction results of molar flow rates showed a satisfactory correlation of 99% with experimental data available in the literature. The kinetic modeling results revealed that the overall rate of methanol synthesis is inhibited by the surface concentration of formate. Furthermore, adsorbed H2 and CO2 were identified as the most abundant intermediates, constituting approximately 80% and 10% of surface coverage throughout the catalytic bed, respectively. According to the present model, relatively mild temperature and pressure ranges of 200–220 °C and 80–100 bar were deemed the optimal operating conditions for enhanced catalytic activity and selectivity towards methanol. These findings not only provide valuable insights into the chemical kinetics of CO2 hydrogenation to methanol but also enable reliable catalytic reactor designs.
Economic, exergic, and environmental assessment of energy-saving separation process for carbon dioxide direct hydrogenation to methanol
2024, Journal of the Indian Chemical SocietyThe rapid increase of carbon dioxide content in the atmosphere has led to environmental problems such as the greenhouse effect, carbon dioxide hydrogenation to methanol will help to alleviate the burden on the environment. Energy-saving processes were proposed for separating methanol products from crude methanol produced through the direct hydrogenation of carbon dioxide. A flash system and nitrogen stripper were applied to remove carbon dioxide and hydrogen in the carbon dioxide hydrogenation products because of the high solubility of carbon dioxide in methanol. Conventional distillation (CDiC), differential pressure thermal coupling (DPDiC), and double effect distillation (DEDiC) were established to obtain high-purity methanol from crude methanol with high water content to achieve energy conservation. Total annual cost (TAC), carbon dioxide emissions, and exergy efficiency were conducted to evaluate the proposed distillation processes. The results show that the three-stage flash evaporation is more energy efficient than the two-stage flash evaporation, with an exergy loss of 16.7% and 24.0%, respectively. The DEDiC process has the highest exergy efficiency of 25.6%, while the DPDiC process demonstrates better economic and environmental performance. Thus, the DPDiC process provides an energy-saving option for crude methanol refining.
From catalyst development to reactor Design: A comprehensive review of methanol synthesis techniques
2024, Energy Conversion and ManagementThis review paper extensively examines the significance of methanol as a vital commodity chemical with broad applications in chemical synthesis and as a fuel source. The production of methanol heavily relies on the utilization of catalysts and industrial reactors. The primary focus of this paper is to provide a comprehensive analysis of various catalysts and reactor companies that play a crucial role in methanol production. The review delves into the synthesis of methanol, encompassing the feedstock used, reaction conditions, and the diverse catalysts and reactors employed in the process. Among the discussed reactor types and catalysts are prominent names such as Lurgi, Casale, Linde, Toyo, Mitsubishi, and Haldor Topsøe. The advantages and disadvantages of each catalyst and reactor technology are carefully evaluated, considering their performance, selectivity, stability, and cost. Furthermore, this study incorporates the most recent advancements in research and development endeavors geared towards enhancing methanol production. This includes innovations in catalyst and reactor design, as well as the exploration of alternative feedstocks. By thoroughly reviewing the current state of the field, the paper concludes by offering valuable recommendations for future research, aimed at addressing the key challenges faced by the methanol production industry. In essence, this paper is a valuable resource for researchers, engineers, and industry professionals actively engaged in methanol production. It sheds light on the latest developments in catalyst and reactor technology and their potential impact on the industry, making it a comprehensive and informative source of knowledge.
Design and optimization of the flexible poly-generation process for methanol and formic acid from CO<inf>2</inf> hydrogenation under uncertain product prices
2024, International Journal of Hydrogen EnergyDuring the design of the carbon capture and hydrogen storage process, a static CO2 hydrogenation poly-generation process for methanol and formic acid synthesis was developed, thereby reducing recycling flow and feedstock losses in the single methanol synthesis process and increasing product diversity. Additionally, a novel flexible poly-generation process was proposed as the product prices fluctuated with the market environment throughout the plant's life cycle. For the static poly-generation process, a mixed integer nonlinear programming model was established, followed by the Mesh Adaptive Direct Search algorithm to determine the optimal parameter design. For flexible processes, with the unscented transform tool, a two-stage optimization strategy is proposed for obtaining optimal design and operating parameters that are computationally tractable. With an input CO2 flow rate of 200 kmol/h, the results show (1) the static process with an optimal Return On Investment of 13.05%, a fixed investment cost of $ 34.14 × 106, and an annual net profit of 4.46 × 106 $/year; and (2) the flexible process, in which the flexibility indices of the methanol and formic acid production units are 1.088 and 1.194, respectively, resulting the fixed investment cost increase to $ 39.19 × 106, an increase of 14.79%. Accordingly, the annual net profit increased by 8.97% to 4.86 × 106 $/year, while the Return On Investment decreased by 4.67%–12.44%. For investment decision-makers, the flexible poly-generation process can achieve higher profits and reduce potential market risks when they have adequate financing.
- 1
Present address: Koninklijke/Shell Laboratorium, P.O. Box 38000, NL-1030BN Amsterdam, The Netherlands. E-mail: [email protected].
- 2
To whom correspondence should be addressed.